Models of DW: 'this document uses the following files not in this site.
I recently started using DW templates in CS6. It was a bit frustrating at first, but seems well wouth it. I've created quite a few pages in the folder root of hares and have no problems there. However, I created a new folder to a different section of my site (mysite.com/new_folder/new_page.htm), and then went to save a new page of the model and got the message "this document uses the following files not in this site. Its the same site, just a new folder which is placed at the root. When I save the page in the new folder there to make a copy of duplicant images, css scripts and place them in the new folder to work? Must be a way to do it and have DW know where to find the original files surely?
Thank you
I downloaded a test page... It turns out that the 'message' was just misleading and all the Info page has correct links. Everything is good
Tags: Dreamweaver
Similar Questions
-
Hello
I have about 300 computers across the country that needs to turn off the AutoComplete for forms feature.Of course, it wouldn't be possible remotely on each machine and change the setting in Options > confidentiality > Firefox Will... > use the custom settings for history > remember search and form of history - it is not practical to use the subject: config screen because the address and toolbars are disabled by default to prevent users from navigating to other pages they are not intended to.
I was wondering if there was a configuration file or a registry setting where I can change this setting in the backgorund, we can push the configuration files or a registry in a manner change on all the machines that would change this setting.
Any help would be greatly appreciated.
Dan
I realized that you can not hide the AutoFill menu drop-down CSS anyway so abandoned that idea.
I think that what follows in the prefs.js file could work, however, I am yet to try it on a PC it will be pushed out to. It works on my machine that I can see if:
user_pref ("browser.formfill.enable", false);
user_pref ("signon.rememberSignons", false);
user_pref ("access code. "prefillForms", false); -
How to scan multiple pages into a single document using the CanoScan LiDE 200?
How to scan multiple pages into a single document using the CanoScan LiDE 200?
I can't find a way to get them to analyze all the time, or a way to put together them later.
Hi dagda24,
You can scan multiple pages into a single document with the scan PDF option. Use the following steps to do:
1. open MP Navigator.
2. click on a Clcik.
3. click Save to PC.
4. change the Type of PDF file to PDF (multiple pages).
5 other changes, as needed, and then click Scan.
-
HP Deskjet 3540: Unable to print documents using the HP Deskjet 3540 (network)
I am printing documents using the HP Deskjet 3540 of difficulty.
All options in the print dialog appear to be blocked.
I've uninstalled and reinstalled the software nothing works. HP Print and Scan Doctor offers no help.
Screenshot below
Any help would be greatly appreciated.
X-23 you are the boss.
I followed your steps and was able to print a test page for Word, PowerPoint and PDF. I also printed a picture on plain paper in full transparency. I was also able to quickly implement the project and printed without a problem.
I have not tried to print a photo on photo because of the low ink level paper but I'd be surprised if I'm not able to.
Thank you for your kind and your patient attention to the problem I was experiencing.
It's really appreciated.
Prosperous 2015 for you and yours.
-
I want to use the registration of custom with hyper-site domain object merges? Is this possible?
Hey,.
At that time, saving custom object data cannot be used with following:
- with Hypersite field mergers;
- with the research data on the data in the field, only the number of overall;
- on off key Dynamic Content in the emails
Thank you
-
Can I use the following script should set up rman DB only or non-rman configured DB
Hello
I need your help this following script
recover database using backup controlfile until Cancel;
I can only used in configured RMAN DB.
(or)
Can we used above usual script on database (IE. RMAN not configured the database)
Please suggest me. Thanks in advance.
If you use RMAN to create backup BackupSet, you use RMAN to RESTORE the database.
Subsequently, you can use RMAN or SQLPLUS to issue the command to RECOVER the DATABASE.
(RMAN has no clause 'using backup controlfile' because it identifies the controlfile as a backup, while sqlplus must use the following clause if the controlfile is a backup)
Hemant K Collette
-
6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2
Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.
You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.
-
I want to rename and move files from a shoot 5 d on a new drive. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?
HI -.
As a prelude to 2014.0, we have added a feature allowing you to choose what number to start the increment of. Look in the section ingest Rename dialog and change your preset. When you click the button, you should see the option "Custom Auto Increment". This will allow you to choose what number to start on. We've also added a few newspapers to try to remember where let prelude last successfully interfere the operation by using this option. So, in theory, to remember the number for you. But if it isn't (maybe you want multiple kickoff ingested at the same time) you can always manually set the number to start with.
Check that out and let me know how it works for you.
Kind regards
Michael
-
Please help im trying to import images from the SD card and get this set up the following files were not imported because it couldn't be read items 1-100
"Could not be read" indicates that the Destination Directory has no WRITE permission in your operating system.
To resolve this problem, you must
- Determine the Destination folder - it's on the right side of your import under Destination dialog box
- Change permissions in your operating system on this particular file have WRITE permission (or switch the destination to one that has the WRITE permission)
-
Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them
Is working this morning!
Depends on your operating system
Go to google, try typing in
Change the Windows permissions
or
Change the permissions of Mac
-
I am a seasoned Photoshop/Bridge CS5 user who has recently upgraded to CS6. In bridge I ran my first batch of Image Processor, trying to convert a set of RAW. NEF files. PSD files with a basic editing action that I created apply them. Photoshop CS6 opens the bridge files and applies the actions, but then I get the error message "alert of Script" "Sorry, I could not deal with the following files" and a list of all the files in the batch, I tried to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but will not close unless I close them manually. I never had this problem in CS5 where would apply the actions that you want to the batch of photos one at a time image processor, then save and close. Reflections on how I can fix this bug?
Get your number of history States. I moved mine the default of 20 to 60, and all is well. For the record, this action does not work on 16 and 32 bit.
Remove resetting of the State history, you will get into trouble if you copy more than one file type. If you go with the change above, I would recommend only with one type of output at a time.
The script should probably define States of high story then put back to the end. The problem with this, is that machines perhaps isn't able to handle the large amount of stages of history. Which means, hit the stages of history can lead to 'out of memory' or "scratch disk is full" errors.
-
I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:
Windows could not start because the following file is missing or damaged;
System32\Drivers\Ntfs.sys
You can try to repair this file by starting Windows Setup using the original Setup CD
Select 'r' in the first screen to start repair.
Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:
1: C:\WINDOWS
Which Windows installation you want to connect?
(to cancel, press enter)
What do I put here?
You must first start on doing something so USB drive a bootable Hiren.
Here's how:
I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).
It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.
You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.
You can easily copy your personal data (documents, pictures, music) to an external drive.
A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
http://www.hirensbootcd.org/download/ (look to the bottom of the page).Unzip the Hiren to a folder where you can find it. There's a Hiren. BootCD.15.x.iso that you have to then.
Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:
Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):
I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter! This part makes me still a little nervous, so be careful.
Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open. Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).
Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files. Hiren ISO is also a good size.
When RUFUS is finished, it will say "DONE" at the bottom.
Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me). If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.
When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office. You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!
Remember: you do not start on your hard drive, - you started in the Office of the Hiren.
A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.
Sometimes that works, then you can also click on start, run and in the type box:
cmd
Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)
CHKDSK c: /r
This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do. You may need to run more than once.
-
I get the BSOD every once in a while during a variety of programs. I've updated all my drivers. I use bluescreenview watching dump files and that's what I have.
A problem has been detected and Windows has been shut down to avoid damageon your computer.The problem seems to be caused by the following file: ntoskrnl.exeDRIVER_IRQL_NOT_LESS_OR_EQUALIf this is the first time you've seen this stop error screen,Restart your computer. If this screen appears again, followthe following steps:Check to make sure any new hardware or software is installed correctly.If this is a new installation, ask your hardware manufacturer or softwarethe Windows updates, you might need.If problems continue, disable or remove any newly installed hardwareor software. Disable the BIOS memory options such as implementing caching or shading.If you need to use safe mode to remove or disable components, restartyour computer, press F8 to select Advanced Startup Options and thenselect Safe Mode.Technical information:STOP: 0X000000D1 (0XFFFFB880018FA1A0, 0 X 0000000000000002, 0 X 0000000000000008,0xffffb880018fa1a0)Ntoskrnl.exe - address 0xfffff800030dc1c0 base at 0xfffff8000305d000 DateStamp0x4fa390f3Hello
Ntoskrnl.exe is a component of Windows which means than anything else he has led astray.
BlueScreenView is a great tool for searching for information on minidumps. In particular
the bottom panel where display the information on 3rd party drivers is useful. Of course
other debuggers, such as WinDBG, might be able to glean information from minidumps.------------------
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
in this thread - top 3 RESPONSES (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65==============================================================
BCCode: D1 0x000000D1
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my credits
methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
When you arrive at the driver and tests of memory sections do reference to generic methods in following
message and then back to the if necessary troubleshooting tool.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlStop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the professional, full and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Creating recovery discs - "unable to open the following file" error "
Hello all,.
I'm trying to create a set of recovery disc for a customer * Satellite L300 - PSLB8A-07U004 *.
While the application opens and begins the creation of the disk set, there, three times now, failed to with the error message of * 'cannot open the following file. D:\ ! "V5_01_07.VRP (error Code: 020123-F1-00000000). *
I tried the first time in this process while all customer data were always loaded.
I have now done a "restoration"out of box experience"because I thought that one of these files may be the cause, but, alas, the mistake was repeated."
Of course, it's irritating (to say the least).I did NOT any changes to the layout or resizing of partitions. »
Any thoughts?
rampant_rhino
Stand by. If I understand you well you CAN restore the operating system using F8, but you CAN create DVDs using "Toshiba Recovery Disc Creator' of recovery.
Am I right about that?
-
Failed to create the recovery disk - error: differences between the following files
Hello, I am using the recovery disc option, but during the creation of the third disc, I get this error repeatedly (I tried to create 4 + times now, using the same type of discs that worked well with the first 2 discs). The full error message is:
"differences between the following files. "Source path: path:F\ZZImg\09753XSP2.swm E\HDDrecovery\SWImg\0975XSP2.swm target (error code: 02016F-3 c-00000000)"
How to solve this? I want to reformat my laptop, and the thought that it would be better to create these discs first. It is recommended to have the front discs I try to reformat? This error would prevent me to use the option 'restore factory settings' which is present by pressing the 0 key during the loading screen?
(I'm not very technically capable, so I am greatly worried something bad).
Any help would be greatly appreciated.
Thank you.
Have you tried using different disks from different manufacturers?
To do this. I had similar problem and it was not entirely compatible disc-related.
I use TDK R CD or DVD. They work great!
Maybe you are looking for
-
What is the difference between a socket and a USB port?
IM really confused, what is the difference?
-
I am a beginner in VHDL, but... is there a bug here in LabVIEW? In the configuration of a node of HDL to window, I selected the following settings: X name:, Branch:, type: bool, length: -. Name:, Branch:, type: [bool], length: 0.; Name: Z, direction:
-
Hey all,. My laptop that I liked for the time I got it, so a pretty good personal camera all-round. However as I just realized, the processor isn't quite cut. For these unfimilair with this product, it's Intel Core i7-4702MQ CPU @ 2.20 GHz. Which is
-
1/4 of the touchscreen unresponsive touchsmart 23 inches while a pc hp
Hello, I got this pc touchsmart with windows 8 is already installed last year. yesterday I used it, and all of a sudden the quarter bottem left of the screen stopped working for the touchpad that the rest works fine. any idea ive done research and no
-
ProBook 4530 s: grinding noise near the vents when I turn on the laptop.
Sometimes when I turn on the laptop, a loud grinding noise is heard from the left corner, near the vents. I think that's probably the fan. I turn off the laptop because it doesn't seem like grinding stops. Then when I turn it on again, grinding no