Add lines to a 2D array

Similar Questions

• Add line last 2d array index

  OK, I m already curse this bloody language for its illusion of "simple".

  I m doing the EASIER operation of any language: filling in a line down to a 2D array.  I have just can´t find a way to do it.

  I m create a table 1 d with data of type string resulting... then I try to add an array of existing channels and this error pops up when I use the function "Insert into array.

  OF COURSE I KNOW THAT THE DIMENSIONS ARE DIFFERENT!, DUH? PRECISELY! A 1 D TABLE SHOULD BE THE LINE OF A 2D ARRAY.

  HOW ON EARTH AM I SUPPOSED TO ADD A LINE OF THE SET DOWN TO A 2D ARRAY?

  Sorry, this kind of stupidity just pissing me off the coast.

  Thanks in advance for any help.

  Pedro

  pguillem wrote:

  OK, I m already curse this bloody language for its illusion of "simple".

  I m doing the EASIER operation of any language: filling in a line down to a 2D array.

  Let me guess - you want to take the 2D HISTORIAL table and add the result to the end of this. This isn't what you are doing. You take a 1 d table and try to write it in a 2D array, that's why it breaks.

  The important point to understand here, that's the basic concepts of the data flows, which should be explained in the first LV tutorials - functions operate on the data that you give them, and controls on the front panel are not magical data stores. They hold everything you put into it. If what you want to do, that's what I described, you will have to do it exactly the same way you would in c: A = A + B, where I am the substitution of + can be added. In this case, you need to read the value of the indicator, add to this value, and then rewrite it. You can do this by creating a local variable of indicator (and remember that local variables are not the same as C.) You can use them in the same way, but their main use is to provide points of secondary access to the controls on the front panel. If you use them to store data, you will find probably yourself written race condition critical, because LV tends to be much more parallel to C and they have not the Atomic protections for sequences of reading / writing).

  LV is relatively simple. If you suffer with it, I suppose you're one of the people who think much more easily in the field of this text according to use of languages. If this is the case, you might not enjoy yourself. In all cases, it must not to throw everything you know already in terms of LV, because this knowledge do not always translate correctly. You need to take, if you have it, is ordered practical programming, such as keeping your neat code (which isn't your example). I suggest also to take a step back and going through some tutorials, because it is certainly the kind of thing that is explained in them.

• Add lines - which method is the fastest

  

  I work with data in data acquisition and I need to add lines. I came up with two methods of getting that and as I work with pretty big blocks of data I wonder which approach is most effective. Thanks for the help.

  Both are methods of 'SLOW' and quite the same.

  If you need to go a lot faster, initialize a large array and then use the function 'replace the item.

  If you have any problem to speed the first is the simplest method.

• How do I add lines to multicolumn listbox control

  Hi all

  the questions are as below:

  1. how to add lines to multicolumn listbox control?

  2. the message is the message of RS232 communication with hexadecimal, how to convert 2D format to fit the Ref property?

  anyboady can provides a simple example? Thank you very much.

  
  

• How to add lines to the PresetEffects.xml from a script

  Hi, I would like to add a few lines in the PresetEffects.xml to another text file or an another JavaScript add lines like this how can I do? :

  < name of the group = "$$$ / AE/Preset/AnimalHead14 / = mouth" >

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthOffsetX = mouth X shift" default = '0' valid_min = '-30,000"valid_max ="30000"slider_min = slider_max"-500"= '500' precision ="1"DISPLAY_PERCENT ="true"/ >"

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthOffsetY = mouth Offset Y" default = "0" valid_min = "-30,000" valid_max = "30000" slider_min = slider_max "-500" = '500' precision = "1" DISPLAY_PERCENT = "true" / > "

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthScaleWidth = scale Overture" default = "100" valid_min = "-30,000" valid_max = "30000" slider_min = slider_max '-500' = '500' precision = "1" DISPLAY_PERCENT = "true" / > "

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthScaleHeight = scale of mouth height" default = "100" valid_min = "-30,000" valid_max = "30000" slider_min = "-500" slider_max = "500" precision = "1" DISPLAY_PERCENT = "true" / > "

  < / Group >

  < / effect >

  {function onClick.btn

  Add the lines of my text file in the PresetEffects.xml

  I did once, like this:

  var scriptEffect = {};
  scriptEffect.xml =
  
      
          
          
      
      
          
          
          
      
  ;
  scriptEffect.matchName = [email protected]();
  
  function installScriptEffect(){
  
      var ret;
      var file = new File(Folder.appPackage.absoluteURI + "/PresetEffects.xml");
      var str, idx, header, xml;
      var xmlSettings = XML.settings();
  
      XML.setSettings(XML.defaultSettings());
  
      try{
          if (!file.exists) throw "ERR_FILE_NOT_FOUND";
  
          file.open("r");
          str = file.read();
          file.close();
  
          idx = str.indexOf("");
          if (idx<0) throw "???";
  
          header = str.substring(0, idx-1);
          xml = new XML(str.substring(idx, str.length));
  
          if (!xml.contains(scriptEffect.xml)){
              xml.appendChild(scriptEffect.xml);
              if (!file.copy(new File(file.absoluteURI+".bak"))) throw "ERR_CANNOT_WRITE";
              file.open("w");
              if (!file.write(header + xml.toXMLString())) {file.close(); throw "ERR_WRITE_FAILED";};
              file.close();
              alert("Preset installed succesfully. Please restart After Effects");
              }
          else{
              alert("Preset already installed. You need to restart After Effects to make it effective.");
              };
          ret = true;
          }
      catch(e){
          file.close();
          alert(e);
          ret = false;
          };
  
      XML.setSettings(xmlSettings);
  
      return ret;
      };
  

  Then, when you want to add the effect, check with myLayer.effect.canAddProperty (scriptEffect.matchName).

  If true, nothing to do, otherwise use the installScriptEffect function. Normally, it works (haven't tried for a long time).

  Xavier

• ADOBE Acrobat Pro DC - add lines to an existing table

  Hello. I have an existing table, I need to add lines.  Is this possible? Thanks in advance.

  It is very difficult to do something like this in a PDF file (unless it was created using LiveCycle Designer).

  You will be better off by changing the original file, and then creating a new PDF from it.

• Using Pathfinder to add lines to a letter?

  I added straight lines on a letter (see picture attached). It's the way I want it to look, but I want to understand how to use Pathfinder or another tool to add lines in the letter. How this is done?

  Thank you.

  

  You could use a transparency mask and keep the direct text.

  

• How to add lines to HotSync7.0.2?

  I've recently upgraded to 6.2 Desktop and HotSync 7.0.2. All my Palm applications seem to wear well, BUT

  I can't understand how to synchronize, 3rd party applications.

  Can I add lines? If this is not the case, how can I sync?

  Thank you!

  You could try to reinstall the desktop versions of the third-party programs, but comes perhaps not compatible with 6.2...

  You will need to check the website of the authors of software for more information.

  WyreNut

  Message relates to: Centro (AT & T)

• Add lines above and below the text

  How can I add lines above and below the text in indesign.

  I inherited this file and want to change.

  indesign to cs6 file example

  http://www.cathylbrown.com/PDF/ TEst - Lines.indd

  http://help.Adobe.com/en_US/InCopy/CS/using/WSa285fff53dea4f8617383751001ea8cb3f-6dd2a.htm l #WSa285fff53dea4f8617383751001ea8cb3f-6dc1a

  Sorry, making reference to InCopy.

  I meant http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6dd2a.h tml #WSa285fff53dea4f8617383751001ea8cb3f-6dc1a

• How to set up 2 Add line buttons in the 1 table?

  Hi all

  I'm trying to set up a table where there are 2 Add line keys, 1 at the top of the table and the other to halfway across the table.

  When I tried a work around to have 2 tables, add rows to the table top does not move the table below it down and only written over anything below.  I hope that makes sense.

  Thanks for any help.

  Send your form to the [email protected]

  Nith

• Add lines to and delete rows in a table to the issue of enforcement

  I downloaded an example of Adobe for the addition or deletion of a line when running.

  The example works fine, but it only allows to generate the maximum of 7 rows!

  I tried to change the code but I missed. Can you help me?

  Here's the code for the Add button

  Form1. #subform [0]. Add::click - (JavaScript, client)
  nTableLength stores the number of elements XML contained in table 1.

  var nTableLength = Table1.nodes.length;
  var nNumRow = 0;
  for (nCount var = 0; nCount < nTableLength; nCount ++) {}
  If ((Table1.nodes.item (nCount) .className == "subform") & (Table1.nodes.item (nCount) .name! == 'HeaderRow')) {}
  nNumRow = nNumRow + 1;
  }
  }

  If (nNumRow == 7) {}
  xfa.host.messageBox ("the maximum number of lines is 7. You cannot add lines more. ","warning ", 3);
  }
  else {}
  Table1.Row1.instanceManager.addInstance (1);
  }

  Take a look at the 'points' field can be defined with a maximum number of lines that illustrated by the subform 'detail', below.

  

  Steve

• Need to add lines to a dynamic form based on numeric field

  I designed a form based on the example in the book of the use of javascript with addInstance Terry to make a button to add a line in a table.

  Works very well for me, however I am transforming the shape slightly so that instead of allowing the user to click the button Add a line I have them enter a numeric value in a field, then call addInstance to create the correct number of lines. The numeric field is on page 1 of the form and is called NumberStudents and is linked as a Global.  I tried to have him call addInstance to add lines, but can't make it work.  Suggestions appreciated. Thanks newbie.

  The only mistake you made was missing rawValue next to the name of the command "NumberOfCards".

  var i = 0;

  for

  (I have = 2; I<>NumberOfCards.rawValue. i ++) {

  Roster.Page2.StudentSubform.Table1._Row1.addInstance (1);

  XFA. Form.Recalculate (1);

  }

  If your requirement is to add the number of rows based on the value entered in the digital field, so you can by calling the setInstances method. This way you need not looping through the number and use of the addInstance every time.

  Roster.Page2.StudentSubform.Table1.Row1.instanceManager.setInstances (5);

  XFA. Form.Recalculate (1);

  or

  Roster.Page2.StudentSubform.Table1._Row1.setInstances (5);

  XFA. Form.Recalculate (1);

  Thank you

  Srini

• Tabular add line question

  Hi guys,.
  
  I have a tabular presentation that I created using the wizard. The fields on the of are URL_ID, URL, URL_Name Report_ID
  
  The URL_ID is filled by a trigger on the table. The name of the URL and the URL field are met by typing in a textbox.
  
  Is it when even spend Report_ ID value of an item hidden in the Add line function so that it inserts into the table. For the moment it insert a null value.
  
  I'm under Apex 2.0 by the way.
  
  Thanks in advance,
  
  Huw.

  Your REPORT_ID (whatever it is) column has a property with a default value which could be an element value (P1_REGION_ID) or a PL/SQL Expression NVL(:P1_REGION_ID, '00000'). In addition,

  Owner of the Table reference
  Reference Table name
  Name of reference column

  must be defined correctly.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Add line does not if more than 5 records are displayed on the screen

  Hi all
  
  Does anyone know why the button Add line on a report of sql update would stop to insert an empty for data entry line when more than 5 records were entered into the form? I can insert up to 5 files. After this, a blank line is more provided by the button. Odd. Have any ideas?
  
  Any help would be greatly appreciated!
  
  Michelle

  Hello

  Change this:

  Maximum number of lines: 15

  TO:

  Maximum number of lines: 1000 (or more)

  Andy

• Form to add line processes?

  Hi guys!
  
  Is anyone of you know how the process to add lines in apex looks like? I would like to repeat with a little modification.
  
  With respect,
  
  PsmakR

  This is much better:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:209

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------