Add more:

Similar Questions

• How can I add more shapes to my shapes menu pages?

  How can I add more shapes to my shapes menu pages?

  There is no provision for adding forms customized forms in the menu in Pages ' 09 v4.3 or in any version of v5 Pages.

  You can keep your forms customized in a separate document of the Pages and then paste them as needed in your present work.

  You can copy the form customized to the Clipboard and then choose in the menu file preview: new from the Clipboard. Now you can export this form in your favorite image format and re-use in the future efforts of Pages.

• HP Envy 17 Notebook 3002ea - need to add more MEMORY...

  Hello

  I have a HP Envy 17 laptop 3002ea (number of product A2Q36EA #ABU) with the following characteristics:

  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  Processor Intel Core i7-2670QM 2.20 GHz, 2201 Mhz, 4 Lossnay, 8 logical processors
  Hewlett-Packard Version / Date BIOS F.08, 11/07/2012
  SMBIOS Version 2.7
  Physical memory (RAM) installed 8.00 GB
  7.95 GB total physical memory
  4.66 GB available physical memory
  15.9 GB total virtual memory
  10.8 GB available virtual memory

  I want to add more RAM, preferably another 8 GB (I use the laptop for work in post production, animation, editing the videos etc.). Please could someone advise me:

  WHAT should I buy?

  WHERE I can buy it?

  HOW to add in my laptop / install it?

  I am a complete novice when it comes to laptops!

  Thanks x

  Hello

  Unfortunately, 8Gb is the maximum ram (IE 2 x 4 GB modules) which can be installed in the machine - I have used the same model exactly myself.

  This can also be confirmed on the following link.

  http://www.crucial.com/UK/store/listparts.aspx?model=envy%2017-3002ea & cat = RAM

  Best regards

  DP - K

• Satellite M70-131 - I want to add more RAM

  Hello

  I have a Satellite M70-131
  Part number: PSM70E-01500RAR

  I want to add more RAM, because I know you have to check three points to buy a new:
  -How can I add?
  -The type of RAM?
  -The number of the BIOS or BUS?

  I'm not sure about the third point, I know that I can add to 2G, and the type of RAM is DDR2.
  But if I have the right point, how can I check the number (BIOS or BUS)? Because I tried to add one, but did ' t work!

  Help me please
  Thnx 4 all

  Hello!

  The Satellite M70-131 can be upgraded to 2 GB of RAM and you have already said you need DDR2 RAM.
  Specification for RAM is DDR2 400/533 and you can add two modules with 1 GB of capacity of each module. The reference is PA3411U-1M1G.

  What do you mean with many BUS and BIOS? This has nothing to do with an upgrade of RAM.

  Good bye

• Equium A100-303: looking to add more RAM

  Hello

  I recently bought a laptop equium A100-303 and am lookin to add more RAM. I was just wondering if it should be buffered or non-buffered or is it important?

  I currently have 1 GB of ram (512 + 512 MB as it is a dual core processor) and I'm looking to move to 2 GB (1024 + 1024). I know that the guy is PC4200, 200 pin SODIMM.

  Also where would be the cheepest place to buy these? Thank you.

  Hello

  > just wondering if it should be buffered or non-buffered or is it important

  Well, Toshiba has recommended using own memory as PA3411U-2M1G modules, but I put t find any information if the module supports ECC (means stored stamped) or Non - ECC (means not stamped)
  To my knowledge, the buffer ECC is about 30% slower than Non - ECC modules.

  He name of your choice what you will buy, but I would recommend purchasing a brand s module.
  I know modules without name are cheaper brand modules are much faster and performance, but the quality is better in the form of modules without name.

  So googel a bit and you will find many offers online. Simply compare prices

• Can I add more ram?

  Hello.i have a laptop computer hp laptop g62 (a80sv I think) and I have 2 GB of ram (ddr3 elpida in 1 ram) I have room to add more ram (I want to add more than 2 GB), but I don't know if my laptop can recognize it.also I want to know how much it costs to buy another one.i am from Greece and I went to the store and he told me that it costs 70 euros but now I don't know if this price is real.do you know if it's old price or something? Thank you

  Hello:

  The best thing to do is to run the crucial memory free analysis tool, who will report what type and how much memory you can install on your laptop.

  http://www.crucial.com/systemscanner/

  Since I live in the United States, I will not be able to help you memory source or prices in Greece.

• SL500 and I want to add more RAM

  Howdy.

  I have a new Thinkpad SL500, such as here: http://www.hemini.com/products/product_details.aspx?prodid=425737&cp=1&sc=1&sct=

  It has an Intel Core 2 Duo (T6670) 2.2 GHz processor and 2048 MB of RAM.

  I want to add more RAM to make it even more effective that I use a lot of programs, sometimes at the same time.

  I wish it have 4 GB, and what I understand is the maximum that it is supposed to be able to handle.

  Then what should I do? I buy a 4 GB of RAM and remove the 2 GB that I have now and install the 4 GB one?

  Or should I leave the 2 GB RAM inside and just buy a 2 GB of RAM and add together inside?

  In addition, the brand has a role? Wouldn't be brand of Lenovo? What other groups are good for RAM?

  They are all the other things I have to consider buying RAM. ?

  Thank you very much.

  If you use 32 bit os I works perfectly with 4 GB but system uses 3 GB. Add the next module that means you probably have 2 GB module inserted. You can simply put another beside it mounted origin. Check with everest, aida, cpu - z or any other things how many modules is placed on your motherboard and you have free banks.

• How to add more variables to a read/write control?

  

  See how the read/write control is connected to global variables? I want to add more variables, I created the globals (some are listed in the table above), but as you can see that they are not available in the read/write control. How can I add them? I also tried to create a new read/write control, but as you can see that didn't help.

  Any help would be appreciated.

  Hi count3r5tr1ke,

  It seems that you are referencing a particular bitfile in open FPGA reference. I think that even when you save your FPGA VI, VI real time still referencing an older bitfile. Have you tried re - compile and referring to the new bitfile once finished compiling? A sure way to make sure that you have the most up-to-date bitfile is to check the VI option when you right-click on the FPGA Open reference and select Configure the reference open FPGA. When this option is checked, if you make changes to the FPGA code, it will force you to re - compile the FPGA VI before you reference it on the real-time side.

  Best regards,

• Add more dedicated video RAM?

  I was wondering if I can add more dedicated video RAM of my video card and if so, how? I have a HP Pavilion Slimline s5-1234. My graphics card is Intel(r) HD Graphics, model WDDM 1.1. My system says is 1696 MB total memory of avalible for my graphics card, but I only have 64 MB dedicated. Can someone please help?

  Hello

  No, system will ASSIGN memory AVAILABLE for the graphics if necessary. No way to add more DEDICATED to onboard video memory. You need another card or an expansion card.

  Kind regards.

• Model: P7-1414: add more memory

  Hello

  Currently, my office is running with 2 x 4 = 8 GB ram (memory in the slot 1 and 3).  I want to add more in the location 2 and 4 to 16 GB.  Is this serious for 4 GB in slot 1 and 8 GB to 3?  or should the 2 x 8 in slot 1 and 3 and 4 GB in slot 2 and 4 GB in 4?

  Please let me know.

  Thank you

  WND

  WND

  Hello

  To qualify for the dual channel, please install same features same RAM on the same locations of color. (blue goes with the blue wire and...).

  Kind regards.

• Add more dynamic events registration refnum

  Hello

  I have a wire that passes Event Registration refnum to my structure of the event. This thread is from VI, that I don't want to touch. He spent recording for the cluster of user events.

  I would add more dynamic events to the refnum (but not to the cluster), so I would like to re-record with the addition of new events.

  When I'm passing this refnum to block 'Register for events', LabVIEW does not allow me to expand this block and add new events, which I think is understandable.

  How can I add more dynamic events to the refnum?

  Close, but no cigar.  When you add user events, you want to be sure that every event has a unique name, then name your constants defining the events differently (as shown here).

  

  Bob Schor

• Q: very simple you can add more than 1 table to a Word report? -If Yes, how

  Hi all

  As described in the topic, is it possible to add more than 1 table to a Word report?

  Very simply, I have some test data in a table and added to my report with the addition of the report table vi.

  I have the same thing again to send data to a different table which I would like to insert in my report in table form. I placed a second addition table report vi directly after the previous vi, but it doesn't work.

  ... Am I stupid? or this function is only meant to be used at the same time? Maybe I need an another vi after adding table vi before you can add another?

  Feel free to enlighten me because I am confused,

  Thank you!

  Change the width of two column Table add to Report.vi from 10 to 1. Setting the value to 10 (unit are inches) will throw an error.

  Ben64

• Add more points to the belvedere

  The end of construction of a process to 6.6. with 50 points, Yes, I used all, now the client wants to add more points to monitor.  What is the process of upgrading 6.6 50 permits a 6.6 100 e/s I/O?  Thank you.

  Jim

  Call OR sales or customer service. We have a specific product to expand points of e/s.

• Printer does not print. An error message to add more paper, what I have done.

  Original title:

  Problem of the printer.

  I have a HP Photosmart C5100 series.  When I try to print from the computer, I get an error message to add more paper, what I have done.  I can make a copy without problem.

  Hello

  As you have already tried to add paper but printer still appears the same error message, it is possible that the printer does not detect paper.

  It could be a problem with the printer itself.

  It would be a good idea to contact the manufacturer of the printer to help.

  I hope that helps!

  If you need assistance regarding Windows please keep us informed.

• When I try to add text to a title block prior to a photo, it limits the amount of text that I can enter a line of text. How can I get to add more text?

  I'm doing a video for confirmation that has pictures on a soundtrack. I would add the persons name and bible passage before each group of students of photo. I am using the two lines of text slides so that their names are larger on top and their passages are smaller underneath. When I cut and paste in a try to type them in directly, it limited to about one line of text, even if there is plenty of room on the text box. Is how I can get to allow me to add more text?

  Try using the "scroll"Perspective it is a Star Wars style analysis and will be more text.