Add new target to the current system of IOM

Similar Questions

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• How to play an old Command & Conquer - Red Alert Win95 version on the current system

  How to play an old Command & Conquer - Red Alert Win95 version on the current system

  Hi PhillipBunting,

  1 Windows operating system you are using?

  If you are using Windows 7, you can consult the following link to check the compatibility of the game.

  Command & Conquer - Red Alert compatibility

  You can try to try to run the game in Windows 95 compatibility mode, and check if that helps. Execution of convenience store compatibility is just a workaround solution, if this does not help, you might need go to the new version of the game.

  Make older programs in this version of Windows

  Hope this information is useful.

• How can I keep the caption text block when I create a new target in the lightbox?

  Any help would be appreciated. I searched and found no info on anyone having the same problem.

  As you can see on the screenshot, my legend box disappears when I add a target after the default ones.

  Thank you

  

  Hello

  It is the default behavior of the Composition.

  When you add a new trigger/target; It is empty and does not text or picture frames.

  You can place blocks of text, or images in the target or trigger, if necessary.

  It will be useful,

  Sonam

• Add new data to the table in a log file

  Hi all. I am new to Oracle and I need to also write new data table in a logfile on Linux in order to live in the display screen. My first thought was to write a trigger, and after some research on googled around, I finally came to this:
  
  create or replace trigger foo_insert
  After Insert on foo
  for each line
  declare
  f utl_file.file_type;
  s VARCHAR2 (255);
  Start
  s: =: new.udate | '-' || : new.time | ' ' || : new.foo | ' ' || : new.bar | ' ' || : new.xyzzy | ' ' || : new.frobozz | ' ' || : new.quux | ' ' || : new.wombat;
  f: = utl_file.fopen ('BLAH_BLAH', 'current.log', ' a');
  UTL_FILE.put_line (f, s);
  UTL_FILE.fclose (f);
  end foo_insert;
  
  It seems properly to add new data in the log file as new inserts occur, but open and close the file each time are of course not optimal.
  In the app real new lines could have inserted every second or two. How can I optimize it? In addition, the log file will be archived and turned every day, so there must be a way to effectively report the relaxation of the oracle to reopen the case.
  
  
  Thank you!

  >
  I would like to pursue the optimization of the trigger
  >
  As Ed suggested you need to think this through a few others and refine the requirements.

  You said "I am new to Oracle. So you may not realize that anything a trigger didn't REALLY EVEN HAPPEN! The transaction can still be restored by Oracle or by the appellant. Want that all the 'hiccups' look too? If this isn't the case, then you can not use a trigger to do this. You need the process that translates the trigger being called to do logging after the data is stored.

  It should be noted that this requirement is before we can offer solutions to a problem.

  Assuming you want the trigger record all attempts change the data, then the best way I know to do that is to minimize the work does the trigger.
  Another fundamental principle is to follow the advice of the Ed and have a clear separation and distinction between "what" should be done and 'how' to do it.

  To minimize the trigger work change proposed Nicosa approach. Create an AUTONOMOUS_TRANSACTION stored procedure that handles the 'how' and just have the trigger to transfer data to the stored procedure values. The trigger provides data; He doesn't know, or care, what is done with the data.

  The stored procedure is then free to use the files, a table, write to a file or any other method is proving to be the best. You can change the methods without affecting the trigger.

  A queue or table may contain data, but again once you need to think about the obligation. Do you need fair access to data only once? Now, you want a "tail". But what happens if this requirement change tomorrow? You won't have to redesign the architecture.

  With a queue once you delete the queue data it won't here later if you want to get it again. With a table you can take as long as you want.

  I would like to start by using a table to store the data. If you use a sequence number or "insert_date" value, you can always query the data of interest. The table just collects data. He does not care how to use data.

  So, by using proven design principles and knowing that the requirements are for the most part unknown and may change unexpectedly, I would be:

  1. create an AUTONOMOUS_TRANSACTION stored procedure that accepts the parameter data and the thicket in a simple logging table.
  2. change your trigger to call the procedure to step #1
  3. create another procedure that performs a query of 'tail' for you will depend on 'insert_date' number or sequence. This query can write data to a file or return a cursor ref that your script can use to provide data for display.

  The approach described above takes each step in the process relatively independent of the other stages.

  Until put you the finishing touches to the requirements that you do not want to lock up your initial design.

• How can I get a query in the search field to open in a new tab or a new window, and the current window?

  How can I get a query in the search field to open in a new tab or a new window, and the current window?

  If you are looking through the search bar in the Navigation toolbar, this preference can be changed to research it open in a tab.

  Type of topic: config in the address bar and press ENTER. Then answer "I'll be careful." Type this pref in the search at the top.

  Browser.Search.openintab = double click to switch to true

• Right-click to add new folder on the desktop, is there

  I want to add new folders on the desktop
  (I use to be able to right-click and new folder was an option to add to the desktop)

  Hello sammyg11, you post to a support forum for the mozilla firefox browser. the question you asked is not really related to firefox but is a question about windows: in this case, please refer to the resources of foreign aid: www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

• How can I open a new window without the current tabs being replicated?

  I have a window open with several tabs. I open a new window and the current tabs are replicated - I'm waiting for the new window empty - what am I doing wrong? Should what settings I change. I'm running Firefox on a MacBook Pro with Snow Leopard OS.

  This has happened

  Each time Firefox opened

  Firefox support Home page (s) by default in a new window.
  If you see something else, then check your extensions (Tools > Modules > Extensions) to see if one of them is the cause.
  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

  How to open this new window?

• How to push a new page after the current pop page

  Hi all

  Is it possible for me to push a new page after the current page to burst?

  For example, main.qml I push page1.qml push page2.qml and pop page1.qml? (so the left in the stack are main.qml-> page2.qml)

  Can any ideas on how I do this?

  Thanks in advance.

  Of course! :-)

  You can use the NavigationPane remove() function...

  http://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__navigationpane.html#function...

• I have to add new contacts in the database. Should what stage of treatment I add?

  I have to add new contacts to the database. Should what stage of treatment I add?

  Hello

  Please use "Save to the Contact Table" stage of treatment.

  Thank you

  edynamic Experts Eloqua

• There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  Why?

  Please tell us what Adobe application you are trying to download. Please try creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• quick method to create a new layer under the current layer?

  would be the best way to quickly create a new layer slot rather than above the active layer to assign a script to a keyboard shortcut - or is it possible to change the default new layer shortcut (command + option + SHIFT + N) to create a new layer above the current layer to create rather a under the active layer?

  Thank you

  Command-click the new layer in the layers Panel button.

• Add new values for the axis desabscisses when adding a new series

  Hi all

  I work with and I found myself with a problem when I try to add new series.

  < mx:ColumnChart id = "cChart" height = "100%" width = "100%" dataProvider = "{dataChart}" showDataTips = "true".
  >
  < mx:horizontalAxis >
  < mx:CategoryAxis id = "cAxis" categoryField = "{name}" / >
  < / mx:horizontalAxis >
  < mx:series >
  < mx:ColumnSeries yField = xField "{field}" = "{name} field" displayName = "{displayName}" / >
  < / mx:series >
  < / mx:ColumnChart >

  DataProvider is a table something like this:

  -Datachart - > [nameField:A, area: 20;]

  nameField:B, field: 30;

  [nameField:C, field: 80]

  In my application, user boxes add new series after the graph is created. For example, imagine that he wants to put on the table of following values:

  -Datachart - > [nameField:A, area: 13;]

  nameField:B, field: 62;

  nameField:D, field: 30

  [nameField:E, field: 92]

  Now, start the problem:

  When the graph is (adding series with ACE) refresh the values on the axis desabscisses are the same 'old'. In these cases ('A', B', 'C'), but the new do not appear (',' E').

  Is there anyway to fix this?

  Replace this part:

  var currentChart:Array = cChart.series;
  currentChart.push (series1);
  cChart.series = currentChart;  This code do nothing!

  with

  var currentChart:Array = cChart.series.reverse () .reverse ();
  currentChart.push (series1);
  cChart.series = currentChart; But this one does!

  This is to ensure that you will create a NEW array instead of use the reference to the former.

• Add new records to the table of the ADF

  Hello
  
  I use Jdev 11.1.1.3.0.
  I have a Page of the ADF with detail Table of form - master, I want to add new records to the table reflecting in DB. Is it possible to do? pointers or demo?
  
  
  Thank you
  MB

  What are the components are used in your table? When you created the table originally, you specified as a table read-only? If your table contains components of af: outputText, then you will need either manually change components entry way, or remove the table and re-drop-the-in the form of table (not read-only)

  John

• Can I add new members of the sketch in a line of a form?

  Hello
  I thought I heard we can add new members of the sketch in a line of a form in V11?
  So if a I have an account called 'Expense of CapEx' computer in a row, I can add new members "Computer CapEx Depr 2 years", 'Computer CapEx Depr 4 years' etc.
  I am in Version 9.3.1 and need to migrate to v11 if this feature is available.

  You could also consider supporting detail as this type of data capture method. I've written a few applications where we have provided a "class" of assets in the accounts, but when people entered data in a specific asset class, they used retail support to specify exactly what they were buying. You can report on the support of detail, but it does not require a change for hierarchies.

  Hope this helps,
  -Jake