Add new records to the table of the ADF

Similar Questions

• JSF: how to add new record in the datatable in the same page

  JDeveloper: 11.1.2.2.0
  using ADF - I want to create a page that contains a datatable, text entry field and a command button.
  When I press the command button, I want the text in the text input field to insert as a new record in the datatable.
  What is the best practice for whom? How to get the value of the input text field and insert it?
  Thanks in advance :)

  http://jamessmith73.WordPress.com/Oracle-Fusion-Middleware/ADF-CRUD-cascaded-lovs/

• Add new records to the table while ESX online

  Hello

  I want to add some new drives in a RAID 5 Array existing VMFS-store of data running on my Fibre Channel SAN, on which there is already a logic unit number.

  Can I add these discs with no problems so my 2 ESX hosts are online, and access to the existing database

  Objective final is to inreasing the size of the array by creating another logic unit number with the freespace added and then creating a new data store

  Thanks in advance,

  Alessandro

  It depends on your San. If that supports the extension line of a RAID set, you'll have no problems. But you need to enlarge the VMFS data store later. As far as I know, this is not possible with ESX 3.5. As single VMFS partition is allowed per LUN think about presenting the new disk as a new LUN space.

  You can add this new LUN as an extension to the VMFS data existing store to get this one expanded.

  Another solution would be to remove all the guests of the existing VMFS (if you Storage VMotion which can be done online), destroy that one and create a larger on the expanded LUN.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to add new record to the Advanced Table.

  Hello
  I created a table advanced in a Page customized and added a button in the footer and added events for this button. After clicking this button, I need to add a line in addition to advanced table. Pls share code for this requirement.
  
  Thanks in advance,
  Roxanne.

  ViewObject attribute is null; ViewUsageName: (XXIosAuthorisedVO1); RegionItem: (bleep)
  ViewObject attribute is null; ViewUsageName: (XXIosAuthorisedVO1); RegionItem: (Ext)
  ViewObject attribute is null; ViewUsageName: (XXIosAuthorisedVO1); RegionItem: (used)

  Please ensure that for these elements of three region Bleep, Ext & employee

  you have defined the attribute of the view property.

  Thank you
  AJ

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• Add new data to the table in a log file

  Hi all. I am new to Oracle and I need to also write new data table in a logfile on Linux in order to live in the display screen. My first thought was to write a trigger, and after some research on googled around, I finally came to this:
  
  create or replace trigger foo_insert
  After Insert on foo
  for each line
  declare
  f utl_file.file_type;
  s VARCHAR2 (255);
  Start
  s: =: new.udate | '-' || : new.time | ' ' || : new.foo | ' ' || : new.bar | ' ' || : new.xyzzy | ' ' || : new.frobozz | ' ' || : new.quux | ' ' || : new.wombat;
  f: = utl_file.fopen ('BLAH_BLAH', 'current.log', ' a');
  UTL_FILE.put_line (f, s);
  UTL_FILE.fclose (f);
  end foo_insert;
  
  It seems properly to add new data in the log file as new inserts occur, but open and close the file each time are of course not optimal.
  In the app real new lines could have inserted every second or two. How can I optimize it? In addition, the log file will be archived and turned every day, so there must be a way to effectively report the relaxation of the oracle to reopen the case.
  
  
  Thank you!

  >
  I would like to pursue the optimization of the trigger
  >
  As Ed suggested you need to think this through a few others and refine the requirements.

  You said "I am new to Oracle. So you may not realize that anything a trigger didn't REALLY EVEN HAPPEN! The transaction can still be restored by Oracle or by the appellant. Want that all the 'hiccups' look too? If this isn't the case, then you can not use a trigger to do this. You need the process that translates the trigger being called to do logging after the data is stored.

  It should be noted that this requirement is before we can offer solutions to a problem.

  Assuming you want the trigger record all attempts change the data, then the best way I know to do that is to minimize the work does the trigger.
  Another fundamental principle is to follow the advice of the Ed and have a clear separation and distinction between "what" should be done and 'how' to do it.

  To minimize the trigger work change proposed Nicosa approach. Create an AUTONOMOUS_TRANSACTION stored procedure that handles the 'how' and just have the trigger to transfer data to the stored procedure values. The trigger provides data; He doesn't know, or care, what is done with the data.

  The stored procedure is then free to use the files, a table, write to a file or any other method is proving to be the best. You can change the methods without affecting the trigger.

  A queue or table may contain data, but again once you need to think about the obligation. Do you need fair access to data only once? Now, you want a "tail". But what happens if this requirement change tomorrow? You won't have to redesign the architecture.

  With a queue once you delete the queue data it won't here later if you want to get it again. With a table you can take as long as you want.

  I would like to start by using a table to store the data. If you use a sequence number or "insert_date" value, you can always query the data of interest. The table just collects data. He does not care how to use data.

  So, by using proven design principles and knowing that the requirements are for the most part unknown and may change unexpectedly, I would be:

  1. create an AUTONOMOUS_TRANSACTION stored procedure that accepts the parameter data and the thicket in a simple logging table.
  2. change your trigger to call the procedure to step #1
  3. create another procedure that performs a query of 'tail' for you will depend on 'insert_date' number or sequence. This query can write data to a file or return a cursor ref that your script can use to provide data for display.

  The approach described above takes each step in the process relatively independent of the other stages.

  Until put you the finishing touches to the requirements that you do not want to lock up your initial design.

• Failed to add new detail in the form of master detail record

  Hello
  
  I created a simple database application from scratch by selecting the start a page master detail. This has generated a report (for the parent) and a page of form (for the child). On using the form to add a new record to the child, the following error is generated:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-01400: cannot insert NULL into ("Student" 1.) "" DELEGATE. " "" ""DELEGATE_ID"), insert"Student"1." DELEGATE values' ('DELEGATE_ID', 'CLIENT_ID', 'NAME', 'INITIAL', 'SEX', "SPECIAL_NEEDS") (: b1,: b2,: b3: b4,: b5,: b6)
  Error failed to process the update.
  
  The field 'child' in the error message is automatically hidden on the form and I guess on the generation of this form using the wizard I would have had the opportunity to link the field delegate_id to a trigger or a sequence like this seems to happen when you create a scratch from application database using other types of page. I'm new to Apex then I would be grateful if someone could let me know why this default behavior occurs.
  
  Kind regards
  
  Kevin.

  I tried for Apex 4.0.2 (my version) and 4.1 (on apex.oracle.com) and I'm wondering for the production of main PK and details in both versions.

  What are your steps exactly in the wizard? Like this?
  Create page-> form-> form detailed Master
  Now you see a list of steps sub whose "Source of primary key.

  Oh I see "Create an Application Assistant." in your message. Start with an empty application (blank page) and use the wizard to create a Page. Maybe it's the difference.

  Published by: InoL on November 18, 2011 09:27

• Inserting a new record in the database using a form empty ADF

  Hello
  
  I'm trying to insert a new record into the database using a form.
  
  I have an Employee table and its corresponding entity object and the view object. The table has an id that is used as the primary key and is filled using a sequence in the comic book.
  
  Data controls, I dragged and dropped at the sight of the employee as a form of ADF and checked the submit button include. Then I dragged and dropped the validation on submit button operation.
  
  When I connect to the app and go to the page used to create, I have 2 problems:
  1 - the form is filled with the logged in user info.
  2. If I try to change the news and validation, the user info is changed in the database and no new record is created.
  
  It makes a little sense to me, but I would like to know if there is a way around it (get an empty form and insert a new record).
  NB: the employee id is not part of the form, I want to be filled using the sequence.
  
  Kind regards
  MB

  User, please tell us your jdev version!

  To do this, you must create a new record before going to the display of the form page. In a stubborn workflow (btf), you drag the operation createInsert of the VO on the btf and it will generate a link method, add a view to the btf and put a navigation of the binding of the method of the page. Mark the method as 'Activity by default'. Now, ren, you call the workflow, you create a new record that will show your blank form.

  Timo

• I have to add new contacts in the database. Should what stage of treatment I add?

  I have to add new contacts to the database. Should what stage of treatment I add?

  Hello

  Please use "Save to the Contact Table" stage of treatment.

  Thank you

  edynamic Experts Eloqua

• How can I add new Member in the dimension of the year?

  Hi all
  
  It's all in the subject! ;-) . This is an application to term!
  But some Oracle partners said, we can do it! For me it is not possible? Maybe if you create the new record to the database.
  
  Your contribution will be very appreciate!
  
  Concerning
  
  Jean

  8493825 patch contains a utility that allows you to add additional years to a hfm application (it may be already installed on your server). It has been verified against deployed EPMA HFM applications as well as Classic applications. Otherwise, you will need to rebuild the application.

• Add new values for the axis desabscisses when adding a new series

  Hi all

  I work with and I found myself with a problem when I try to add new series.

  < mx:ColumnChart id = "cChart" height = "100%" width = "100%" dataProvider = "{dataChart}" showDataTips = "true".
  >
  < mx:horizontalAxis >
  < mx:CategoryAxis id = "cAxis" categoryField = "{name}" / >
  < / mx:horizontalAxis >
  < mx:series >
  < mx:ColumnSeries yField = xField "{field}" = "{name} field" displayName = "{displayName}" / >
  < / mx:series >
  < / mx:ColumnChart >

  DataProvider is a table something like this:

  -Datachart - > [nameField:A, area: 20;]

  nameField:B, field: 30;

  [nameField:C, field: 80]

  In my application, user boxes add new series after the graph is created. For example, imagine that he wants to put on the table of following values:

  -Datachart - > [nameField:A, area: 13;]

  nameField:B, field: 62;

  nameField:D, field: 30

  [nameField:E, field: 92]

  Now, start the problem:

  When the graph is (adding series with ACE) refresh the values on the axis desabscisses are the same 'old'. In these cases ('A', B', 'C'), but the new do not appear (',' E').

  Is there anyway to fix this?

  Replace this part:

  var currentChart:Array = cChart.series;
  currentChart.push (series1);
  cChart.series = currentChart;  This code do nothing!

  with

  var currentChart:Array = cChart.series.reverse () .reverse ();
  currentChart.push (series1);
  cChart.series = currentChart; But this one does!

  This is to ensure that you will create a NEW array instead of use the reference to the former.

• Right-click to add new folder on the desktop, is there

  I want to add new folders on the desktop
  (I use to be able to right-click and new folder was an option to add to the desktop)

  Hello sammyg11, you post to a support forum for the mozilla firefox browser. the question you asked is not really related to firefox but is a question about windows: in this case, please refer to the resources of foreign aid: www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• Error when creating new record in the jspx page.

  Hello! I have error when you try to post the new record in the jspx page (see: http://my.jetscreenshot.com/2677/20100820-oo8z-19kb)
  
  DB I trigger and in the EO primary key attribute I Type set to DBSequence.
  
  Where is the problem and what to do?
  
  Best regards, Debuger

  @Sireesha excellent point!

  @Debugger the reason why you get the error, it is you're missing an af:convertNumber, however, as said Jean Lou, why even put a DBSequence field on your screen?

  John

• Can I add new members of the sketch in a line of a form?

  Hello
  I thought I heard we can add new members of the sketch in a line of a form in V11?
  So if a I have an account called 'Expense of CapEx' computer in a row, I can add new members "Computer CapEx Depr 2 years", 'Computer CapEx Depr 4 years' etc.
  I am in Version 9.3.1 and need to migrate to v11 if this feature is available.

  You could also consider supporting detail as this type of data capture method. I've written a few applications where we have provided a "class" of assets in the accounts, but when people entered data in a specific asset class, they used retail support to specify exactly what they were buying. You can report on the support of detail, but it does not require a change for hierarchies.

  Hope this helps,
  -Jake