Add records
Hello
We have a MD3000i currently configured with 6 X 146 GB drives, now we want to add 6 more readers to this device, these new drives are drives of 1 TB.
question,
Can we add these new 1 TB drives this device? or they have 146 GB drives?
Thank you
On a MD3000i, the device must always be in unified mode. Any MD1000 is Garland off a MD3000i must also always be in unified mode.
Split mode is reserved, if you want to divide a MD1000 in 2 and give readers half to 2 different servers (each server would need a PERC5E or PERC6E inside).
Note that only Dell PowerVault certified discs will work in a MD3000i (or any MD1000 Garland out of it). Certified readers will be the Dell name/logo on the label and have a Dell partnumber on them (as well as the manufacturer original partnumber and model).
Tags: Dell Products
Similar Questions
-
Let the user add records while asking the VM?
I need to allow users to request additional disks when you apply for a virtual machine. Preference as much as they want, but I need to host a minimum of four additional disks.
I saw a screenshot online (I have attached to this post, he also linked here) where a plaintiff could click a button 'Add Volume' to dynamically add disks having a virtual machine. I can not get this option. I changed the 'Volume up' option in the plan of action for quite a number, but it is apparently something else I do too.
Any suggestions?
I thought about it. If you do not specify a maximum amount of storage in the blueprint, then users cannot add records while calling for a virtual machine. Adding a caused large maximum disk size the 'Add a volume' button appears when you ask for the virtual machine.
-
Add records in the target table
Hi all
I HAV done an interface for a simple source data transfer to the target. When I run it, the records are stored in the target table. Now, I want to launch the interface (for the same or different source table) and add the records to existing records in the target table.
Kindly guide me, explaining how shud I do the addition in the target table.
Thanks in advance.Hello
You can use the IKM control add... it will add records...
Thank you.
-
How can I add records to un.dwt.asp games - generated page
help - I'm tired...
below is the code of a page (test3.asp) based on a model called "catalogue.dwt.asp". I need different recordsets on pages based on this template. f I try to add a recordset to test3.asp, I am told "this change will cose alter which is locked by a model or a translator" - so I can't add the recordsets (though Interestingly, you can see that I managed to somehow add both recordsets immediately before he started saying this.)
If I try to add recordsets for the model (which is not the way I want to do it anyway), I thought I added the code outside the html tag and will not be copied unless I have add <! - TemplateInfoOutsideHTMLIsLocked - >
I have bvuilt many other sites where I have this issue as DW / must be something different code sometimes - the bottom line is - how to have a. temaplte dwt.asp that I can build other pages and then add record sets in.
I would be very DEAR THANKFUL to anyone who can help me put this issue to bed.
Thanks in advance:
Code attachedThanks for the reply, I'll try to restart
-
How to add records to a file via the file adapter.
Hi all
How to add records to a file via the file adapter.
I must read data from the database and need to add all the records in a file.
Thanks in advance.Hello
I think you have a while loop to hit the DB in your process (as you said you need to extract data from DB 10 times if 1000 rec is here)
First sopy your DB O/P to a var
and second time add to previous data. (Otherwise you can directly use Add to start instead of copy and add)
When the loop ends, you can turn to the file adapter Var.Otherwise, you can configure yourFileadapter as it will be aapend current recordings for previous records.
You can use 'Append = true' in your adapter wsdl file.
It will add the previous records to existing records in the same file.Concerning
PavanKumar.M -
It is possible to add records to tables using Enterprise Manager?
Can we add records to tables using Oracle Enterprise Manager web interface instead of the sqlplus commands? If not, is there an easy way to insert data into the table using a GUI?
Yes, you can use the most common and free GUI tools like SQL Developer
You can find more information about this
http://www.Oracle.com/technology/products/database/sql_developer/index.htmlFrancis
-
How can I add records to my data store?
I recently installed hypervisor, but when I look at the section data stores and devices of the Configuration tab in vSphere client I see only 2 datastore with 1 of my disks added.
Under devices, I see all the records in the list, so I tried to add storage for data warehouses. Running through the wizard, I can see the drives, but when I select one and then I get an error of the stack 'call 'HostDatastoreSystem.QueryVmfsDatastoreCreateOptions' of object 'ha-datastoresystem' on ESXi "x.x.x.x" failed. "
My server is not on the HCL, but it does not pass the test hardware. It uses a SATA ICH10 controller, which can be configured as a RAID controller. I tried to change settings in the BIOS for RAID or IDE base, but VMware can see that the first disc (they are all on the same controller).
Is the issue because of the RAID? That is the hypervisor can install on an environment not RAID, but to create virtual machines, a supported RAID controller will be necessary? I've seen other reviews in the forum suggesting that no RAID should work, but not recommended due to performance issues. For our Organization and the use of this server, performance is not going to be critical, because it will be used as a dev server and we are happy to lose a bit of performance.
Can anyone tell if you saw this problem, and how it is resolved? The disks are 4 x 2 TB SATA WDC
Thank you
Andrew
You mentioned that you had two discs showing that data warehouses? If you have already installed and configured ESXi and created virtual machines I remove disks and use another machine to set records. There are several linux rescue disks and almost any net for a standard linux distribution installation disc should work as well. It is possible to use the Technical Support in ESXi to do as well, but you may lose your current installation.
-
Someone please would be so likely to point me in the direction of how to add all the records in a query in an existing table? See you soon.
INSERT INTO tablename (colname1, colname2, colname3)
VALUES (val1, val2, val3)-or-
INSERT INTO tablename (colname1, colname2, colname3)
SELECT val1, val2, val3
Of othertable
WHERE everything whatIf you have the result of a query to a ColdFusion cfquery or cfprocresult, you can browse the results using cfloop and cfoutput (using the query parameter) and insert the values into the new table, a line at a time, in the loop. Something like that...
SELECT col1, col2, col3
From yourtable
WHERE everything what
INSERT INTO yourothertable (col1, col2, col3)
VALUES ("#col1 #", "#col2 #", "#col3 #")
Phil
-
Add records to "Favorite links" in the Windows Explorer Navigation.
I can't drag or insert or add all the folders under favorite links in Explorer window. When I open the Explorer window (by pressing the windows key and the E key), the Explorer window opens. The favorite links area is (empty) in blue, and the words, favorite links, are grey. When I try to drag a folder to the favorite links area, it is not drag, and a red circle with a line through it appears. Help, please.
I can't drag or insert or add all the folders under favorite links in Explorer window. When I open the Explorer window (by pressing the windows key and the E key), the Explorer window opens. The favorite links area is (empty) in blue, and the words, favorite links, are grey. When I try to drag a folder to the favorite links area, it is not drag, and a red circle with a line through it appears. Help, please.
Hello
Open Windows Explorer and navigate to the C:\Users\yourname\Links folder. Right-click in the folder, and select new/shortcut. Create a shortcut to a local folder.
Close Windows Explorer and open it again to see if this shortcut will appear in the Favorites.
If this does not work, go to the folder/organize and search options. Click the Display tab and make sure that Show Hidden files, folders, and drives is selected.
Make sure that Hide extensions of known file types and Hide protected operating system files are not selected. Click apply/OK.
Close and reopen agin Windows Explorer, place you in the links folder and see if there is a file named Desktop.ini into this folder.
Let us know.
Thank you for using Windows 7
Ronnie Vernon MVP
-
How to add records or how to keep the list in the stored procedure
Hello
I am facing a problem in adding the record in the type
create or replace TYPE "PROD_SEARCH_COUNT_TBL" AS TABLE OF PROD_SEARCH_COUNT_OBJ;
-
to add records to one table from another
Hello gurus
I have a table in which I have a few files... now, I want to add in the documents of table A of another table B has the same structure and columns.
Y at - it a command for itinsert into A select * from B;
-
How to add record and save everything to a toolbar in Dreamweaver?
How do you add save and save all to a toolbar in Dreamweaver? By selecting file save all is not very effective. I am looking for a click of a button.
Where can you right click and select Save?
Right-click on a tab document (or anywhere in the gray area dark next to the tabs)
Economy/Save all Standard toolbar buttons
-
Stored procedure to add a record do not add record
I have never successfully added a record via a stored procedure, but I managed with adding records through behaviors using recordsets with stored procedures and server, so I know that connections work. I have the data to MS SQL Server and ColdFusion web page. When I enter data and click 'Submit', it does absolutely nothing. When I check the SQL table, no record has been added. Any help would be greatly appreciated. Here are my stored procedure:
Replace:
Null value With:
I provide each form with a value variable by default so that a value will always exist for each variable.
Use the null attribute, if the value is 'yes', WHAT NULL value will be passed to the parameter of the stored procedure, if the content of the attribute value will be used
http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=Tags_p-q_14.html#1102102
-
I have a PE2850 with 2 disk Raid 1 on Windows 2003 (68GB)
I need to add 3 (156GB) drive in Raid 5 for a second disc of Windows
What should I do?
-
Hi friends,
I do flex mxml 4 web application with as3, I am struck upward in the next concept, shar your suggession thereon.
I use datagrid with 3 columns NUMBER, NAME, AMOUNT. an and a box Add button and a delete button.
I have two records in the same name in the grid, when I click on a record in the grid and click ADD means of button this year, both AMOUNT WILL ADD records that record with the same name and give this value in a text box.
How to do this?
useful suggesssion or sample modal
Thanks in advance,
B.Venkatesan.
Hello
var totalsum:int = 0;
var index: int = db.selectedindex;
var selname:string = bd.dataprovide.getItemAt (index) .name;
var totallen: int = (db.dataprovider) .length;
for (var i: int = 0; i<>
{
var checkduplicate:string is bd.dataprovide.getItemAt (i) .name;.
if(checkduplicate==selname)
{
totalSum += bd.dataprovide.getItemAt (i). AMOUNT;
}
}
textfield_id. Text = totalSum
---------------------------------------------------------------------- ----------------------------
Gallot Hiroji | [email protected] | www.isacglobal.com
---------------------------------------------------------------------- ----------------------------
Maybe you are looking for
-
Everyone knows a message popping up requiring a password change?
seemed a bit fishy, so I ended up reseting my phone. I never got a message like this and change my password often. I hope that's not a bug.
-
Block a website using Firefox?
I want to block certain websites to prevent my children to have access to them because they contained porn and gambling
-
I don't have an administrator password for my laptop HP 15 bought used, and that's all that is
Bought a used HP 15 laptop and it will not be in service says there need and administrative password that I don't get the error code [I. 55056878].Ty for any help
-
I can't get Vista Ultimate to sleep. I am in bed and the morning the screen is always looking at me. How to discover the process or whatever it is, that it keeps awake? Thank you
-
When I do a cmd to get a prompt back, then type Format F:/xI get the error message about not running is not in high mode?