Add/Remove program fails.

Similar Questions

• Installation failure: Windows failed to install the following update with error 0 x 80070666: update of security for Office 2003. Office XP/2003 set upgrade to Office 2007. Office XP/2003 not within Client Add/Remove programs.

  Details:

  • Microsoft Office XP/2003 set to upgrade to Microsoft Office 2007.
  • The page using Microsoft Update (Custom) shows significant traffic updates for Microsoft Office XP/2003.
  • No sign of Microsoft Office XP/2003 in Add/Remove programs on the Client.
  • Customer usually receives updates from WSUS running on Small Business Server 2008.
  • WSUS on Small Business Server reports as updates failed.

  Hello
  Welcome to the Microsoft answers site.

  I suggest you contact TechNet, and this problem would be better suited to the TechNet community

  Please visit the link below to find a community that will offer better support.
   http://TechNet.Microsoft.com/en-us/default.aspx
   
  Thank you and best regards,
  Azam - Microsoft technical support.

• Error when you open Add or remove programs: "failed to create value" At Line 451 how this can be corrected?

  Once all updates completed, I now can't add remove programs to work.

  I get the following in a box error message: "failed to create value"at line 451.

  Someone knows how to fix this?

  Hi ZebWebb,

  1. What service pack is installed on the computer?
  2. You have security software installed on the computer?

  If you have recently installed Windows XP SP1 on the computer, then see the article and check if that helps.

  Error when you open Add or remove programs: ' failed 'at line 410' of value creation.

  http://support.Microsoft.com/?kbid=823768

  If you have not installed Service Pack 1 of Windows XP on the computer recently then check if the problem persists in the safe mode and after return details.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• Failed to open the centre or on Add/Remove programs of action

  I have Windows 7 and I am having serious problems with my laptop. When I try to open my action center to view my message, it keeps giving me an error. It says Windows Explorer stopped working suddenly and then appears an error message that says: the instruction at 0xfb40317c referenced memory at 0x05020b0c. The memory could not be read. Click on ok to terminate the program. When I try to access my control panel in order to achieve the application to add/remove programs, I get the same message about Windows Explorer suddenly stopped working and then another pop error message that says: the instruction at 0xfb403187 referenced memory at 0x000001bd. The memory could not be written. Click on ok to terminate the program. I'm not sure at all what that means and I don't know how to fix the problem either. Could someone help me please? I would be very grateful. I use this computer for my studies and it is interfering with my school work. I'm about three-quarters of his studies and got my partner, and I don't want that's the reason to explain why I can't finish. Please someone help me. Thank you very much.

  Tabitha Caudill

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  (2) run the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• How to uninstall Firefox if Add/Remove Programs does not work?

  My Firefox is completely insensitive. I can't get a browser or anything like that. I just caught the application folder and thrown in the trash, because add/remove program did nothing. Also, I can not download the latest version of Firefox. He tries, but then said: "your download was interrupted.

  How can I make sure that I have deleted ALL the old Firefox and what can I do to download a new?

  You can also download the complete file if loading from a flash drive (or do it in any case, as the stub Installer has problems on some systems).

  • http://www.Mozilla.org/en-us/Firefox/all

• I can't uninstall Firefox. I tried my Add/Remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it won't work. Firefox is the only program that I am not able to uninstall u

  I am unable to uninstall Firefox. I have tried my add/remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it will not run. Firefox is the only program I am not able to uninstall using the normal methods
  

  This has happened

  Just once or twice

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR = {357DAD02-321A-4E1D-8305-C8CE3D8CA934}; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 2.8; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  I ' v tried running C:\Program Files\Mozilla Firefox\uninstall\helper.exe.
  It does not work.

• Generic icon in the Add/Remove Programs list

  Hello to you all, useful forum fans!

  I have a nice custom icon that I built in my specs of the executable version, but when I use an installer to install my program, the icon in the Add/Remove Programs list is the software generic one (with the box open and CD).  How can I get my custom icon to use in the list as well?  I'm using LabVIEW 8.5.1 (and wishing my company should pay for 2010! ).

  Thanks for your help,

  -Joe

  
  

• Remove labview 2009 without using Add/Remove program

  Hi all

  I have problem with the removal of LabVIEW 2009.

  I deleted some folders in the C drive, folder OR.

  Now I can't start my LabVIEW 2009 and it does not appear in my Add/Remove Programs list.

  I tried to delete all the folders and files in the C drive under folder OR, but the pop out error message shows that I don't have the authority to do so.

  So, how can I remove it completely?

  I had intended to reinstall LabVIEW 2009 after that I have completely removed.

  Very much appreciate your help.

  That's why I say try to reinstall LabVIEW. He could just do a repair of your installation. Then, you can use Add/Remove programs to uninstall completely.

  But when you uninstall completely there will be folders OR remaining. These are things like user.lib.

  Have you tried to reinstall the runtime?

  One last thing. I don't know how you got your installation so messed up, but remember that if you build a Setup program you should not install on a system with the development environment. There are so many things that can go wrong.

• wldlog.dll missing in messenger - cant cause of uninstall program is not listed in my Add/Remove programs

  When I try to open MSN messenger I get an error message saying wldlog.dll is missing - it was suggested uninstalling and reinstalling messenger however the program does not appear in my Add/Remove programs in the control panel - it appears in my area of program under start - programs - what can I do

  Hello

  ·         What operating system do you use?

  ·         Are what Messenger you referring?

  ·         You try to install the Messenger and check if the problem persists?

  ·         Were there recent changes made on the computer before the show?

  Please provide more information on the issue so that we can better help you.

  If the problem is related to Windows Live Messenger, you can post the question on the link provided below for assistance.

   

  Portal Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

• Successful marked KB2419632 update but do not show in Add/Remove programs

  Hi all

  I have Windows XP, SP3.

  This update (KB2419632) that successful shows in the history of Windows Update for January 13, 2011.

  However, he was not in the list of updates in Add or remove programs.

  I noticed only 2 weeks later (January 2011-27).

  I downloaded the update and he ran for office. It installed and is now listed in Add/Remove programs.

  I know I should ask questions first, but I found this forum later.

  It was the right thing to do? Should I keep or uninstall?

  I would do anything to this topic or next month updates will install as they always have?

  Never had any problems with the updates before.

  I also noticed the error Event ID 8 event with source crypt32 sometimes Viewer on 16 January and 27 January.

  Not sure if this is related to the issue of the update.

  Any help, tips are appreciated.

  Albenbell

  P.S. I have Norton Internet Security 2011 that I have updated since the 2010 version, about 3 weeks (8 January - 2011).

  Hi Albenbell,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. do you have an antivirus/antispyware/security or other programs that are set to block it?

  Usually this will happen not unless if you make system changes that can remove the updates. However since you installed it again you can let him be here and no need to remove it. This problem won't happen with future updates and you can go ahead and install them.

  About event ID 8, you can consult the following KB articles and check.

  Crypt32 8 events reported continuously on Windows Server 2003, Windows Server 2003 R2, or Windows XP

  http://support.Microsoft.com/kb/2253680

  8 the event ID is logged in the application log

  http://support.Microsoft.com/kb/317541/en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Free space on my Add/Remove Programs list.

  Add/Remove Programs list my I have a microsoft. NET framework 1.1, and then service pack 2 microsoft 2.0 framework finally framework 3.0 service pack 2.0 microsoft... question is do I have all the three for what these programs are run or can I release a few MB, but 2 uninstall?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  See...

  Aaron Stebner's blog: Mailbag: need should I even older versions of the .NET Framework on my system after installation of .NET Framework 3.5 SP1?
  http://blogs.msdn.com/astebner/archive/2009/04/20/9557946.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates, mainly updates, which are manually downloaded and installed see the square Windows XP - > Control Panel - > Add / Remove programs. ?

  Updates, mainly critical updates, which are downloaded and installed manually appear actually Windows XP-> Control Panel-> Add / Remove programs. I use NO automatic update of Windows. I run a batch file to install more than 20 + critical updates, but none of them are showing up for me in the list "Add / Remove Programs". Yes, I have the check box 'Show updates' checked. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  Yes. They should display Control Panel Add or remove.

  TaurArian [MVP] 2005-2010 - Update Services

• I have Windows XP home edition, error: process id = oxle98 (7832) Threadid = 0xlab8 (6840), when updates download sp3 it is impossible to install... because it is already installed according to 'Add/Remove Programs ".

  I'm having a problem with windows XP Edition family and service pack 3. In "Add/Remove Programs", it lists ServicePack 3 as it is installed, but when I download updates, it's always there needing to be installed... when I try to turn off my computer it always tries to install which in fact clinging and unable to turn off if I have to disconnect the whole shebang. I tried looking through the help and tried to look at things, he suggests to delete first, but I do not have these bugs, programs, issues. I want to fix this if possible. The error message is: Processid = 0xle98 (7832), Thread = 0xlab8 (6840)

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

   

  This problem can occur if the service pack is not installed correctly, so uninstall us the Service Pack 3 (SP3) to your computer and try to download the standalone package and try to install and control the issuance

  To uninstall SP3, you can follow the link provided below.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Now, you can follow the below a level provided to download the SP3 on your computer.

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows XP Add Remove Programs tool does not open, can't access area Add Remove programs on the control panel.

  When I try to open the Add/Remove Programs tool in Windows XP, it will not open.  The window opens briefly, but then it disappears and I don't get an error message.

  My system is up to date with latest anti virus scanning clear.

  I lost some registry entries?

  Unfortunately the system restore did not help.

  Grateful for your advice.

  When I try to open the Add/Remove Programs tool in Windows XP, it will not open.  The window opens briefly, but then it disappears and I don't get an error message.

  My system is up to date with latest anti virus scanning clear.

  I lost some registry entries?

  Unfortunately the system restore did not help.

  Grateful for your advice.

  First, click on the link below and download the appwiz.cpl file, save it to your desktop. Right-click on the file and choose copy. Click on start > run > type x:\windows\system32 (x is the letter of your main generally c drive). In a free space in the system32 folder, right click and choose Paste. If you receive a prompt to replace the existing file, click Yes.  Restart your computer and try to access Add/Remove.

  Click HERE.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.