Add Service to the new listening port

Similar Questions

• How to operate the new listener automatically?

  Hello
  
  OS: Windows XP
  DB: oracle 10g
  
  
  I added a new listening port of the listener.ora file.
  
  After restarting the computer, I found that only the former auditor was underway, a new one must be started by the command "lsnrctl start new_listener_name" manually.
  It's really annoying. Could someone tell me how set and make this listener running automatically?
  
  BR
  Martin
  
  Edited by: tqma may 25, 2011 16:02
  
  Edited by: tqma may 25, 2011 16:12
  
  Edited by: tqma may 25, 2011 16:13

  Hi Martin,

  You need not write screept in windows. You go to the Setup Wizard net oracle. Create new listner. Create the service. and start the listner.and that's all. It will be operational. and as I mentioned go to administrative tools-> services-> name-> property listner->, click start automatically. and the next time it starts automatically.

  Hopefully this might solve the problem.

  Thnaks,
  Khalid Joshi
  Oracle Apps DBA

• Add bookmark to the new tab does not

  I was trying to understand how to add elements to the "new tab" page in the latest version of mozilla. This latest version, on the new tab page (hit the + tab), my shortcuts are missing but three and they are images all much larger than before.

  When I click on the Hardware tab in the browser, nothing happens. SO I can't switch to classic, empty or improved.

  When I followed the instructions of mozilla for the bookmark, click Show all and try to drag in the new tab page and the rejection, the brand book opens in a new tab instead of create a new shortcut on the new tab. That's what I'm doing: add my favorites back to the new tab page. I use it all the time. Help!

  Hello

  Don't know that if that answers your question, but with the latest update of Firefox, the number of tiles is now determined on the size of the screen - if zoom you or enlarge the window you have several tiles appear.

  If you want to set a fixed number of tiles, I believe you can do it with the following extensions:

  • https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-tools/

  You can also see jscher2000's Solution here: https://support.mozilla.org/en-US/questions/1025414
  It requires the add-on from the elegant but will decrease automatically the tiles on the page:

  • https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  With more tiles, you might be able to add your bookmarks in them. I think that you must drag your bookmark in a cage for her to pin on the tile, or between tiles.

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• How you add cash for the new Portfolio Manager?

  How can you add cash for the new Portfolio Manager. It is not MSN Money application is simply Money Portfolio Manager.

  Hi Thirualluvar,

  Who is the manufacturer of the application of Portfolio Manager?

  Microsoft, the Portfolio Manager application is Microsoft Money 2008. If you use the same, you can contact Microsoft Money technical support for assistance.
  http://support.Microsoft.com/ph/870/en-us#TAB4

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm about to upgrade to a NEW computer and do NOT know how to approach the transfer on my Photoshop CC program/service to the new computer without LOSING any settings. Can someone advise?

  I'm about to upgrade to a NEW computer system and do NOT know how to approach the transfer on my Photoshop CC program/service to the new computer without LOSING any settings. Can someone advise?

  Trevor thanks for your advice and take the time to answer.

  What about Paul

• Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012

  I am my output of an old Windows box to a new server migration and have problems with the new ports.  I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port

  When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.

  My test was then on the 6th and last instance and went well.

  When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.

  If I have one of these printers connected to the 6th port, it worked fine.

  I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."

  I tried to add the port via the registry - he added, but would not yet print.

  Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"

  I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees

  I modified the local security policy to enable users to add printer drivers.

  And I have now run out of ideas! Someone at - it a?

  Thank you

  This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).

  So it's fixed

• How to change the default listening port?

  Hi all

  11.2.0.4

  RHEL 6.5

  I managed to install Oracle Db 11.2.0.4 on RHEL 6.5

  He created a default listener uses port 1521.

  With the following entries in listener.ora.

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0.4/db_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = ip-10-0-0 - 216.ec2.internal)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  How can I change the port in 1522? Can I just he replace value of listener.ora?

  Should I also change the value of KEY = EXTPROC1521 to KEY = EXTPROC1522?

  
  

  
  

  I tried to change the port in 1522 in the listener.ora but when I start "lsnrctl status".

  
  

  [oracle@ip-10-0-0-216 admin] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production on March 7, 2015 06:19:54

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production

  Start date March 7, 2015 06:19:05

  Uptime 0 days 0 h 0 min 49 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0.4/db_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/IP-10-0-0-216/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = ip-10-0-0 - 216.ec2.internal)(PORT=1522)))

  The listener supports no services

  The command completed successfully

  Now, it does not support the services ORCL which is the default database installed

  I can not connect to the database the string '@orcl' of both connection using the default

  [oracle@ip-10-0-0-216 admin] $ sqlplus system/manager@orcl

  SQL * more: version 11.2.0.4.0 Production on Sat Mar 7 06:23:50 2015

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-12541: TNS:no listener

  Help, please...

  Thank you

  MK

  Hello

  As said earlier after which the listening port, you must update the parameter local_listener database as below:

  ALTER system set local_listener ='(ADDRESS = (PROTOCOL = TCP) (HOST = ip-10-0-0 - 216.ec2.internal)(PORT=1522))'

  editing the system registry;

  HTH,

  Pradeep

• How to set up the new switch/ports/NIC for MS iSCSI initiator

  Hello

  I'm looking for data on our main server snapshot and then include it with our VM through scripted admsnap commands. I found that the only way to attach/detach when the server is running must be involved in the Microsoft initiator path.

  I am now tripping over the implementation of networks necessary for this virtual machine display the SAN using the initiator.

  Our up to date is:

  vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

  vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

  vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

  http://i44.Tinypic.com/20pezr4.gif [line] 

  Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

  Thank you.

  Hello.

  vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

  vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

  vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

  Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

  I'm guessing that you have added two new adapters with the label 'VM Network' network to this virtual machine?  I'm also guessing that vSwitch0 has no access or routing to the storage network.  If so, you will need to do is change the vSwitch1 and vSwitch2 to add a new type of virtual machine connection.  Click on the 'Properties' link beside vSwitch1/vSwitch2 and in the tab "Ports" click on the button 'Add '.  Choose 'Virtual Machine' in the type of connection, it give a descriptive label and click Finish. Then return to the virtual machine (change settings) and change the network connections in your virtual machine to point to the new label, that you just created.  Finally, configure or verify) addressing IP in Windows and try the Ping again.

  Good luck!

• Cannot turn off the location Services on the new iPhone

  For some reason, there is no way to disable the location Services on new iPhone 6 s daughter. We have switched/updated sound from an old iPhone 5, but were sure disable settings find my phone/Find My Friends. In addition, iPhone 5 has been wiped clean. However, location Services are unable to be activated off the coast on the new iPhone... the toggle switch is "grayed out". Even in circles iCloud, even in the General settings.

  The idea was to find it on my friends for the new phone, but this is not possible, since it states that this service is managed by the iPhone 5... is no longer active. No matter what I try (reboot, reset location/privacy settings, turn off all network connections), I am unable to adapt localization Services (On / Off) and subsequently, the share location parameter.

  3 other phones that we have obtained (6s as well) do not present the issues and working properly, including the activation of location Services button.

  Hi, pairof9s.

  Please visit Apple support communities.

  I understand that you can't change the setting of location Services on iPhone again your daughter 6 s.  It looks like may have restored the old iPhone backup and restrictions are activate that prevent changes to certain characteristics.  You can check by going to settings > general > Restrictions and see if they are enabled.  You can then temporarily disable restrictions you can change this setting.  Take a look at the article below for more information.

  On Restrictions (parental control) on your iPhone, iPad and iPod touch

  In regards not being not able to find my friends, you need to maybe just remove the iPhone 5 find it my iPhone via iCloud.com service.  Take a look at the article below for instructions on how to remove the device.

  iCloud: remove your device, Find My iPhone

  See you soon

• Cannot add screenshots on the new portal

  Does anyone have the same problem? I see in chrome, it tries to download but love up to 30%, it refreshes the page just then said 'Updated successfully, etc.' but the new screenshtos have been added. I have only 1 screenshot added so far like the last month and I just want to add another 1. total of 2.

  Hi nemory,.

  Leave the page for a few minutes before sending/backup. It could be a problem with the size of the images that you want to download and that they are not quite finished, even if the page says they are.

  Let me know if it works.

  Bryan Van Engelen

  BlackBerry World

• Add constraint to the new table

  Hello
  
  can someone give me please an idea on this subject?
  I created a table to an existing table, how do I add the constraint imposed on the old table newly created table?
  
  
  
  
  
  
  
  
  Thank you.
  Madam.

  Hello

  If you create a new table using DEC, then he wouldn't copy the old table to the new table constraints.
  Some of these options, you can use.
  (1) using dbms_metadata for the ddl for all dependent objects on the old table and run against the new table after you change the name of the table name/object.
  (2) use imp/exp or impdp/expdp without data to copy the table and dependent objects such as constraints.

  Concerning
  Anurag Tibrewal.

• How to create/add sites to the "new tab" page?

  I followed the link to help you guys already created. He asks to go to the window "Show all bookmarks" and drag a bookmark already created a vacancy in the "new tab" page. This does not work for my PC as once I drag the desired bookmark, just open this page on the new tab page. Please help with adding new tiles to the new blank tab page.

  I thought about it.

  I can't find anywhere in the manual where it says that Firefox must be set on remember the story so that it works. But he does.

  I put the tools-> Options-> life private Firefox Will: do not forget history

  and it works very well.

  I can understand why remember the story must be about to have FF build this list automatically. But why must it be to build this list manually?

  Well.

  I recommend FF to update their documentation.

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• Cannot add categories to the news application in the Customize page.

  Enforcement in Windows 8 news has started to behave strangely showing no not all Bing news categories so I went to the Customize page to see what was going on. I've disabled all categories and rechecked all and each of them showed the added icon. After I did none of these categories presents and the app shows only an advertisement and the dialog box "next steps."

   
  I deleted and reinstalled the application several times and the problem persists, and I even tried to remove the settings manually. What can I do about it?

  I solved the problem. Here's what I did:

  1. Open "change PC settings." and clicking on the tab "sync my settings.
  2. Switched 'On this PC synchronization settings' to Off.
  3. Opens the start screen.
  4. Right click on the new tile.
  5. Click "Uninstall" and then "Uninstall" once more.
  6. Clicking on the tile store.
  7. Clicked and and then on "your Apps".
  8. In the drop-down menu, choose "Apps not installed on this computer.
  9. Clicked on the 'News', and then click the 'Install' App below.
  10. Once installed, I went back to the start screen and clicked on new tiles.
  11. The new app has finally been reset (yay!).
  12. Re-opened "change PC settings", and then the tab "Sync my settings.
  13. Switched 'On this PC synchronization settings' on it.
  14. Fact!