Add the connection fails after you set up for access to SQL Server

Similar Questions

• How to add the reference key after you have created a table?

  Hello
  I have two tables:
  
  create table (t1)
  a key primary number.
  b the number);
  
  create table t2)
  c number,
  d number);
  
  
  Now, after you have created these two tables I want to alter table t2 by making the column 'c', referring to the table t1. How to do this?

  ALTER TABLE t2 add CONSTRAINT PK_C PRIMARY KEY (c);
  ALTER TABLE T2 ADD CONSTRAINT FK_C FOREIGN KEY REFERENCES (C) T1 (A);

• Spectrum XT by clicking on disk! Drop the WiFi! After you send it for repair 4 times! Why me!

  What should I do to get a laptop HP to work for my money?

  Initially, I bought a desire that I sent to get repaired 3 times because of the problems are not fixed.

  Was sent then a spectrum XT 5010nr as a replacement unit.

  Worked like a charm, until what it has not started at a black screen.

  After countless hours talking on the phone with abroad that support a no. IDEA how DO I USE WINDOWS and even less how to help me fix my laptop, I sent it for repair and it came back working again.

  BUT NOW he has a hard drive that is constantly clicking and making noise even when I'm not doing anything on the laptop and a WiFi that keeps giving up the connection or making 'limited' while Macs on THE SAME NETWORK on the same network and Android devices HAVE THAT ISSUE.

  Not wanting to not spend another 72 hours of my life, losing time with support 'concierge' of the India following a script no matter what you tell them and can "certainly help you with that" up until 3 hours later, they admit that they have no idea of what they are doing, I have researched and done everything I could changed every setting in Power Options, reinstalled Windows 8, and problems still persist.

  I would try to sell the unit, but I feel hurt hurt someone with a laptop of shit.

  Is HP, possible on this beautiful soft Earth I can get a perfectly portable work on you for the money I spent to buy it in the first place? I love the design of the spectrum but if he cannot hold a * beep * WiFi and if I live in constant fear of drive failure hard (because of the ominous clicking), it is not worth!

  I have forwarded your message to the right people for their review. You should hear from someone bit via private Message on this forum.

• The configuration of the fax fails after you have reinstalled the software

  I have an Officejet J4680 AIO and for some reason the pilots disappered? then I reinstalled the drivers using the full software download. Now, the fax configuration will not say that the cordis phone connected to the "EXT 2" which is the way it works for years and it's that way because it is connected to a DSL modem and because the phone has an answering machine on it. That's how I was told to connect to HP tech and the cable operator. Now that I have re-installed the software, he spends more fax test. The telephone cable from the modem is connected to line 1 and the phone is connected from 2 - EXT because it has an answering machine. Can someone explain to me why this is happening?

  Hello pwforever

  I have a few articles that can help you. You receive specific errors or codes?

  Fax on a PBX, ISDN or ADSL product or assistance with an HP all-in-one phone system

  Print and interpret a Fax test report

• Error in the oracle database after you set the "Compatible" setting to lower

  Hello
  Windows 2008 server
  Oracle 11.2.0.3.0
  
  I just put changed the parameter system compatible on my database (import to a lower version - 10g) and attempted to restart and my database does not open now.
  Pls help, what shape I do now? !
  Here's what I've done?
  (Given that the mentioned documentation that I have to restart the database for the compatible parameter is taken into account, I did.)
  

  SQL> alter system set compatible='10.1.0.0.0' scope=spfile;
  
  System altered.
  
  SQL> show parameter compatible
  (still showing same)
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  compatible                           string      11.2.0.0.0
  
  So, restart!
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup open
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'
  
  SQL> alter system set compatible='11.2.0.0.0' scope=spfile;
  alter system set compatible='11.2.0.0.0' scope=spfile
  *
  ERROR at line 1:
  ORA-32012: SPFILE format is inconsistent with value of COMPATIBLE parameter
  
  
  SQL> shutdown immediate;
  ORA-01507: database not mounted
  
  ORACLE instance shut down.
  
  SQL> startup mount;
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'

  Pls help to fix... its very urgent.

  Emmanuel says:
  Hello
  Windows 2008 server
  Oracle 11.2.0.3.0

  I just put changed the parameter system compatible on my database (import to a lower version - 10g) & tried to restart and my database does not open now.
  Pls help, what shape I do now? !
  Here's what I've done?
  (Given that the mentioned documentation that I have to restart the database for the compatible parameter is taken into account, I did.)

  SQL> alter system set compatible='10.1.0.0.0' scope=spfile;
  
  System altered.
  
  SQL> show parameter compatible
  (still showing same)
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  compatible                           string      11.2.0.0.0
  
  So, restart!
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup open
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'
  
  SQL> alter system set compatible='11.2.0.0.0' scope=spfile;
  alter system set compatible='11.2.0.0.0' scope=spfile
  *
  ERROR at line 1:
  ORA-32012: SPFILE format is inconsistent with value of COMPATIBLE parameter
  
  SQL> shutdown immediate;
  ORA-01507: database not mounted
  
  ORACLE instance shut down.
  
  SQL> startup mount;
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'
  

  Pls help to fix... its very urgent.

  It is a forum for peer volunteers. There is no "urgent" here. For "urgent", you open a sev-1 SR with Oracle's Support.

  That said, what I would do at this point is to create a your spfile init.ora file, and then edit this file init.ora to set the compatible parameter to where it should be, create a file the init.ora spfile and restart db.

  Assuming your sid is "geooap":

  copy spfilegeooap.ora spfilegeooap.save
  set ORACLE_SID=geooapp
  sqlplus /nolog
  create pfile='initgeooap.ora' from spfile;
  exit
  notepad initgeooap.ora  << fix the parameter
  sqlplus /nolog
  create spfile from pfile='initgeooap.ora';
  startup
  

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• The bad language displayed on the LCD after you set up the printer

  HP Photosmart C4450 all-in-one printer Solution Center keeps popping up the following:

  "The wrong language displayed on the LCD after you set up the printer.

  The printer has been upward and works well for months and all of a sudden it stopped working and refusing to speak English.

  It is totally insensitive to one of the buttons pressed. The LCD screen is white and gray just glowing.

  How can I solve this problem?

  Thanks in advance for any help.

  Hello

  I don't know how your printer got himself into this difficult situation, but I think a reset should back you on track.

  I think this could work to its original factory settings to install your printer.

  To do a complete reset follow these steps:

  1. disconnect the power cable from the back of the printer.

  2 do nothing for about 30 seconds.

  3 press and hold the Cancel & color copy, keep their detention now connect the power cord to the back of the printer.

  This should be left to the printer to the condition, it is in when you took it out of the box.

  I hope this helps.

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• How can I prevent the Thunderbird goes directly to the next message after you delete that I read?

  How can I prevent the Thunderbird goes directly to the next message after you delete that I read? I want to return to the list of all incoming mail, so I can choose what email I open then. I could see something that I don't want to open at all, but the way it is set up right now, it opens the following email automatically.

  Thank you. I don't want to download an add-on, so I tried the messages pane, and I guess it will do. I used Thunderbird a few years ago and he used to have an option where it would go after deleting a message during the consultation in its own window. But I think I can live with this option. so thank you once again.

• Add the attachment failed

  Hello

  on FSCM90 with tools 8.49

  I have this error:

  Add the attachment failed

  And found Add an attachment has failed (137.2) (Doc ID 659882.1) who says:

  
  

  1. on the Options of Installation > installation > Installation Options > project costs, the file attachment Option is defined as "File Server".

  But I do not see this menu.

  Is this something wrong with me or this document?

  Thank you
  

  There are various reasons for this error. Can you please send the full error message?

  There is a navigation more where we can administer that is attached files Set Up Financials/Supply Chain > common definitions > attachments > manage attachments

  There is a navigation more (Set Up Financials/Supply Chain > install > Installation Options Select project costs...)    On the right side of the Panel, there is a file attachments options)

  which you can search

  Let me know if it helps

  Praveen

• Import metadata connects in online mode, but "view data" says the connection failed

  Hello

  My installation of obiee is on AIX (solutions for linux will be good). I installed successfully obiee. I created a connection odbc with no problems.

  I download and installed the dev admin too i.e. the stand-alone tool.

  Offline, the two 'import metadata' and after the table is imported, 'Examining the data' works without any problem.

  In online mode, I click on 'Import metadata' of the connection pool or file, both instantly connect. Once the table is imported, I select a column and say "Look at the data" and it says that the connection failed. Should the customer Oracle DB installed on the machine as unix? I tried to copy the file tnsnames.ora to my local computer to the OracleBI_1/network/admin directory, restart services and connected in online mode, BUT always "the connection failed".

  Could someone help me with this please? seems to be a known issue.

  Thank you

  Dan

  YES for the Oracle client.

  Check this parameter to the top of the Data Sources on Linux and UNIX - 11 g Release 1 (11.1.1)

  You can copy the admin folder or completely ignore

• Try to update Shockwave Flash; It downloads, but when I click on install; the connection fails? WHY not the connection?

  Update of Adobe Reader, Shockwave Flash and Java used to be so easy... until a year ago. Now, I hate when I run the Plugin Firefox check, only to see the UPDATE. I seem to be able to download ("initialization") the app, but when I go to INSTALL (I hope I have the right words), it indicates that the CONNECTION FAILED. Try again. THE CONNECTION HAS FAILED. CLICK FINISH TO RESTART THE INSTALLATION PROCESS. It became a cycle without end I contacted my internet provider (and going through their process of reboot) I'm connected to the Internet. I disabled my anti-virus prgm and my firewall; nothing seems to help. Last time I could actually INSTALL one of the programs/applications above, I did it with the help of ' solving problems when you use Firefox "... and who let me download,... but I can't find a selection like this now... it's why I write for Firefox/Mozilla.
  I have been using Firefox for about 5-6 years now, and I love it! Except for these issues. I'm not a dummie, but not a geek either... I just need help.

  • See Flash Plugin - maintain and troubleshoot
  • Use the adobe page
    http://www.Adobe.com/software/Flash/about/
    At the same time check the version installed, and which is the latest available versions.

  You have a version 17 for what is very recent and are perhaps the most recent and up to date. The latest version is currently 17.0 v. 0.188

  There may be some small problem with the auditor to update Firefox rather than with your updates.

  • The Firefox Plugin checker is available in the page manager addons or use this link
    Mozilla.org/pluginCheck/

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.