The bad language displayed on the LCD after you set up the printer

Similar Questions

• Language display button became unavailable after update

  Language display button became unavailable after update

  Hello!

  I use the Russian version of the HTC sense XE. After the last update button, triggering languages of entry become unavailable. So I can't type on my Russian servers.

  Someone knows something about this problem?

  My PocketCloud's Pro version.

  Max, St. Petersburg, Russia.

  Once again my apologies, we still don't officially supported the Russian language with our application. =\

  Josh Maurer
  Visit our web site books and the Knowledge Base at pocketcloudsupport.wyse.com
  

• Cannot print after you set up the printer

  Original title: printer

  I thought that I just installed a HP Laserjet P1102w printer. I went through all the steps in my Windows 7 under "add a printer". I went to print a test page. Nothing. I get the notice to solve problems. I went through the troubleshooting process. No problem is listed as a problem. I try to print a test page once again, nothing happens.  I get the need to solve to find them again. ??? Can / will help you?

  Hi Clinton.

  I'll be happy to help you set up your printer and I appreciate your efforts to solve the problem.

  Many printing problems are caused by material which not is not set up quite right. Here are some ideas to solve common problems with the hardware of the printer.

  I would ask to refer to the article below which will help you to configure the printer from the start and you should be able to print it after.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Internet does not work after you set up parental controls.

  I just create a new account and set up parental controls for it. Before I did the internet worked, but after you have configured parental controls, internet would not just work for my desktop which has a direct line.  I have a router and even after, the wifi signal and internet would always work however my line connection direct wouldn t.  I continued doing to solve the problem and start system restore, but every time I tried to set up the account with the internet parental control just doesn't work.

  Thanks in advance.

  
  

  Hello

  Maybe there's a settings problem.

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem with alert printer after you set up eprint

  I've just set up my HP eprint/connected to my printer HP Officejet 6700 account. I went through all the instructions and generated a code for me to record my printer. My printer came but I noticed that I have 2 alerts next to the printer which has been recorded. The alerts are:

  • Online
  • Problem with printer

  When I click on the message of the latter I get the following message

  • An unspecified problem was reported. Please check your printer.

  See the front panel of the printer for more information on the resolution of this condition

  I checked the printer, but it is not showing problems. I have however deleted the re-recorded new printer and web service. This time he seems to have solved the problem, but when I went back to the account later in the day the alert reappears.

  Could anyone help in this case.

  Hi BillyBoy59,

  Welcome to the HP Support forums.  I understand that you are getting a message "Problem with the printer" in connected HP.

  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

• After you set up the account on iPhone6 (iOS 9.1) all messages appeared: No sender; No subject; 31/12/69 the Assembly cannot be deleted. Messages can be sent ok.

  After setting up my account on iPhone6 (iOS 9.1) all messages appeared: No sender; No subject; 12/31/69. Editing does not have any message to delete. Messages can be sent ok. I sent a message from my office, on the phone, and while it was received, it was posted exactly as above. My e-mail account provider of Cableone and says that the problem is in the phone, and not with their system. Is there anything short of deleting the account and re-enter I can do?

  Do a forced restart: press and hold the home button and sleep, wait for the Apple logo, release the buttons.

• How do I get the time to stick after you set the timeOut remaining property

  Hello

  Is it possible to get the remaining time to stick after the timeOut parameter, or do I have to manage a separate clock for this?

  After this excellent tutorial here ice http://tv.adobe.com/watch/adc-presents/create-shared-forms-in-livecycle-collaboration-serv /

  It's no big deal - just to extend BatonProperty and replace the instantiation of

  the wand with your stick extended, then add a Get accessor that returns that new

  Get accessor, you added to Baton...

  Nigel

• Add the connection fails after you set up for access to SQL Server

  I am under SQL Developer 1.5.5, who installed with Oracle 11.2.0.4 database Client.  I downloaded jdts - 1.3.1.jar and added its location in tools > Preferences > database > Third Party JDBC Driver (add entry) to set up the ability to access SQL Server.  Now I can't have a dialog box open when I try to add connections.  Anyone has any ideas, please?

  Yes.

  1.5.5 is really old.

  The 1.3 jar works with version 4.0 of the SQL Developer.

  You can get the pot 1,2 - I think that it will work with 1.5, or you can obtain a newer version of SQLDev off the coast of the RTO and use the CONTAINER of 1.3. I highly recommend if the latter.

• Error in the oracle database after you set the "Compatible" setting to lower

  Hello
  Windows 2008 server
  Oracle 11.2.0.3.0
  
  I just put changed the parameter system compatible on my database (import to a lower version - 10g) and attempted to restart and my database does not open now.
  Pls help, what shape I do now? !
  Here's what I've done?
  (Given that the mentioned documentation that I have to restart the database for the compatible parameter is taken into account, I did.)
  

  SQL> alter system set compatible='10.1.0.0.0' scope=spfile;
  
  System altered.
  
  SQL> show parameter compatible
  (still showing same)
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  compatible                           string      11.2.0.0.0
  
  So, restart!
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup open
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'
  
  SQL> alter system set compatible='11.2.0.0.0' scope=spfile;
  alter system set compatible='11.2.0.0.0' scope=spfile
  *
  ERROR at line 1:
  ORA-32012: SPFILE format is inconsistent with value of COMPATIBLE parameter
  
  
  SQL> shutdown immediate;
  ORA-01507: database not mounted
  
  ORACLE instance shut down.
  
  SQL> startup mount;
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'

  Pls help to fix... its very urgent.

  Emmanuel says:
  Hello
  Windows 2008 server
  Oracle 11.2.0.3.0

  I just put changed the parameter system compatible on my database (import to a lower version - 10g) & tried to restart and my database does not open now.
  Pls help, what shape I do now? !
  Here's what I've done?
  (Given that the mentioned documentation that I have to restart the database for the compatible parameter is taken into account, I did.)

  SQL> alter system set compatible='10.1.0.0.0' scope=spfile;
  
  System altered.
  
  SQL> show parameter compatible
  (still showing same)
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  compatible                           string      11.2.0.0.0
  
  So, restart!
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup open
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'
  
  SQL> alter system set compatible='11.2.0.0.0' scope=spfile;
  alter system set compatible='11.2.0.0.0' scope=spfile
  *
  ERROR at line 1:
  ORA-32012: SPFILE format is inconsistent with value of COMPATIBLE parameter
  
  SQL> shutdown immediate;
  ORA-01507: database not mounted
  
  ORACLE instance shut down.
  
  SQL> startup mount;
  ORACLE instance started.
  
  Total System Global Area 1720328192 bytes
  Fixed Size                  2255904 bytes
  Variable Size            1174406112 bytes
  Database Buffers          536870912 bytes
  Redo Buffers                6795264 bytes
  ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version
  10.1.0.0.0
  ORA-00202: control file: 'F:\ORACLE11G\ORADATA\GEOOAP\GEOOAP\CONTROL01.CTL'
  

  Pls help to fix... its very urgent.

  It is a forum for peer volunteers. There is no "urgent" here. For "urgent", you open a sev-1 SR with Oracle's Support.

  That said, what I would do at this point is to create a your spfile init.ora file, and then edit this file init.ora to set the compatible parameter to where it should be, create a file the init.ora spfile and restart db.

  Assuming your sid is "geooap":

  copy spfilegeooap.ora spfilegeooap.save
  set ORACLE_SID=geooapp
  sqlplus /nolog
  create pfile='initgeooap.ora' from spfile;
  exit
  notepad initgeooap.ora  << fix the parameter
  sqlplus /nolog
  create spfile from pfile='initgeooap.ora';
  startup
  

• Not able to open my email address from the computer after you set up in the iPhone.

  Original title: IMAP and Charter

  I recently bought an I phone and put in place and count on this subject by e-mail.   Now, I have problems with my email account on my computer.   If I check my emails on my phone, I can't get into my account on my computer.

  Hello
  If you are having problems with your phone I try:
  http://www.Apple.com/support/iPhone/contact/
  B Eddie

• error on a blue screen after you set new Athlon Proc and motherboard - Strop 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)

  Original title: I need emergency with a blue screen error after new Athlon Proc and motherboard.!

  I had to fix my computer professional brothers due to its motherboard out. So, I advanced and ordered a motherboard latest and processor and also much more memory because the PC was about 6 years old. After installing, I he started and configured the BIOS and thought that it should start right up because it was working fine until the motherboard is out and also I left to himself, the hard drive that has XP installed, because he was also big enough for what he needs. But instead of cranking up XP, I get this error every time even when I try and boot in safe mode.

  I have also ordered him a new copy of Windows 7 to update his OS, but until I can get into XP and do an upgrade, I'm stuck. (I have to do an upgrade because of her inability to save his business files before exiting the motherboard.)

  * Without the [] error code: [stop: 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)]

  Any help will be greatly appreciated, thank you.

  There is the old motherboard-specific drivers (for example, video, network, bridge, BIOS, etc.) in XP loads that are not compatible with the new motherboard. Conversely, you may need drivers specific to the new motherboard (see the disc that came with the motherboard for details). You might have to perform a repair installation on the existing XP. When you started on the XP installation disc, do not take into account the first mention of repair and then accept the option the second time, you are prompted to repair the existing installation.

  To be honest, you also get a new drive of 500 GB for Windows 7. A hard drive of six year, or approximately 80Gb (...?) and who will get eaten up real quickly by installation of Windows 7. In addition, I don't think you can update directly from XP to Windows 7. I'm sure that there must be a Vista installation in the meantime, but I was called incorrectly.

• Problems of Windows Mail after you set up Sky email on Android phone

  I had an account of Windows Messaging for many years. Computer uses Vista. My email account is with Sky.

  I just bought a phone Android (Samsung Galaxy S 2) and to allow emails sync with this I enabled IMAP in my sky email account, then made a new account in Windows Mail IMAP settings.

  The problem is that 10000 emails sent & received since 2008 trying to download. I continue to also invited to enter my username and password when I don't know the account entry is correct.

  Finally, when in Windows Mail, I see now 2 lost records, a related probably to my previous account POP (still alive but not by default) and the other put my new IMAP account (and by default).

  Can someone help me configure things properly? All I want is a set of folders in Windows Mail, and not that there are 10000 emails!

  Anyone knows if I can talk to a human being in this regard if necessary?

  Thank you

  Well, I did some research and was able to set up an IMAP account on my domain server.  There are some good instructions here: http://help.seattleserver.com/imap-setup-outlook-express that is specific to its installation, but you can see which screens, you will need to complete your details and options.

  With respect to the 10000 emails, I suggest that you perform the following steps at the server level, which is to move messages from the Inbox to a folder created by the user.  Then in OE, go to tools | Accounts | Mail | Properties | IMAP and uncheck the option to check messages in all folders.  When you synchronize it can ignore the folders created by the user rather then synchronize with it.

  See if that helps any.

  Steve

• Message from blackBerry Smartphones I get after you set up e-mail. Help please

  What should I do to remedy this?

  Dear customer of AT & T Yahoo!:

  We noticed that you access using mail not secure electronic settings in your email program.

  We want to make sure that your AT & T Yahoo! Member ID, password, and e-mail messages are transmitted securely between your e-mail (such as Outlook or Outlook Express) software and servers AT & T Yahoo! Mail. To meet this need, please enable SSL via the instructions available on the support Web site.

  As several mail notifications have already been sent to this topic, we ask that you Please make the necessary changes immediately. Don't forget, you need to make these changes, if you want to continue to send and receive e-mail using an e-mail client.

  Thank you for your cooperation,

  The at & T Yahoo! customer support

  What email address this message comes, you can chk mail from yahoo or BB to find the senders e-mail address.

  also chk this thread: http://groups.google.com/group/alt.usenet.offline-reader.forte-agent/browse_thread/thread/2084bb2287...

• You can add an EVO to an existing SSO after you set up?

  As the title. I don't think that this is possible but I would like to hear the technique if it can or cannot.

  Thank you

  I asked the development team on our engineering call today. And I have the answer...

  While there is nothing to stop you this from a technical point of view, it would break other processes included in the device. For example, the automated workflow that adds a 2nd, 3rd and so device to increase the capacity of the Evo would be broken...

  So, we advise against this change...

  Kind regards

  Mike