Add the drive to E520 (when Dell had transformed the RAID on with 1 mounted disk)
Try to add a second SATA drive to my E520. Reason is that 1) many problems with the system and I tried to reload the OS (XP Pro) to Dell reinstallation DVD. Problem is that this disc and the drivers disk have not all drivers so ruined my system.
Bought a new drive of 250 GB and equipped in first sata0 Bay, added a new disk plugged old drive into sata4. Built new operating system to a new disk, still no drivers so downloaded from another PC and have a BONE online and seems to work ok. Now trying to get the old disk on port 4 to work.
Enabled in the BIOS, watch unknown player.
Noticed the RAID setting, it was turned on even if only 1 disc installed initially. So went to stop and he warned that the BONE may be unusable and need to reinstall if I disabled RAID.
Tried turning off RAID, disk on port 4 now accepted.
Restarted and the system is unable to load (blue screen.
Reset RAID on IT, removed old drive on Port 4 now works again, but it seems that I have to start all over again the installation. Rather frustrated that DEL has failed to correct records for resettlement, and they screwed up the BIOS settings. Why have RAID on when there is only 1 disc, crazy.
Any ideas appreciated, but I am interested in the worst option and reload again. At least its only operating system.
Thank you in anticipation
Peter
Tags: Dell Drives
Similar Questions
-
How to add the new page with the new preferences marginal?
Hello
can someone tell me? How to add new page with specific preferences marginal? is it possible to add the margin setting when adding page?
Part of engineering substances comes with Google when necessary. (I think)
nt-considered-harmful http://blog.boyet.com/blog/javascriptlessons/javascript-for-c-programmers-the-with-stateme / ... and much more can be found "with statement considered as harmful.
There is nothing wrong with the definition of the properties on one line, except that it becomes progressively harder to read, understand, maintain, and update:
myDoc = app.activeDocument; var myLastPage = myDoc.pages.add(LocationOptions.AT_END, undefined, {marginPreferences:{bottom:"6p", left:"6p", right:"4p", top:"4p"} });
Note that since you are using "LocationOptions.AT_END", you don't have to use a reference to any page. This is only necessary when you want to insert a page anywhere except at the end or the beginning.
-
I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore
Hello
If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
Security with redundancy. These will not be encrypted and you can access the files out of them or
subsequently copy on a hard drive.Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.
---------------------
If the system does not start, then you will need to put the drive in another computer or in a
External enclosure USB so you can copy files to removable media.---------------------
Burn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspxHow to burn a CD with Vista
http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/Burn a CD or DVD in Windows Vista
http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/Microsoft video - how to burn CD/DVD
http://www.YouTube.com/watch?v=0BwF60m05m8Excellent Forum for help with programs and CD/DVD problems
http://Club.cdfreaks.com/Burn a CD or DVD in Windows Media Player
http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
Burn a CD or DVD in Windows Media Player: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspxBurn a CD or DVD in Windows Media Center
http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspxBurn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
How to burn an Audio CD - see also related Articles
http://www.vista4beginners.com/how-to-burn-an-audio-CD
Burn a CD or DVD using Windows Vista - a video
http://www.YouTube.com/watch?v=0BwF60m05m8Disc burning: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspxShould which CD or DVD format I use?
http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspxWindows Media Player playlist: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspxGet the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello
I use ascii_diadem_9.1_or_later.zip to merge the data from several .csv files.
The problem is that I am so some weird futuristic timestamps in a channel
which do not appear in the original .csv files:
How to adjust the VB Script automatically adds a new channel to the a .csv resulting
file with the original name of the .csv file for debugging purposes?
Any help is greatly appreciated!
Thanks, Katharina
Hi Katharina,
What happens when you drag your tiara BROWSER or Windows Explorer data files in the data portal? See all date/time values in a table in VIEW of this channel? The problem may be that you do not have a use but which properly load your data files. The example is designed to show you how to concatenate several files of data together, but assumes that you could provide / have your own use. If you use work already, then look for these lines to the top of the VBScript and substituting the name of your use "CSV". If your files have a file extension different "*.csv", then you must also change the line "FileExt '.
FileExt = ' CSV files, *.» CSV » ' « *. DAT; *. CSV '.
Use = "CSV" ' "' or 'SpecificDataPluginName '.Brad Turpin
Tiara Product Support Engineer
National Instruments
-
Add the windows firewall with the security log for windows 2008 Event Viewer
Hi all
I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.
As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.
Is anyway to add this in Windows 2008?
Your help is very appreciated.
BR/WT.
Hi all
I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.
As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.
Is anyway to add this in Windows 2008?
Your help is very appreciated.
BR/WT.
Best place to get the most appropriate response is technet...
Please repost this under, http://social.technet.microsoft.com/Forums/windowsserver/en-US/home
-
Add the RAID 5 disk in an array without openmanage
Hi can anyone tell me if its possible to add a new disk to a RAID 5 existing table on a server without using poweredge dell openmanage software. The reason is that I am that it is almost impossible to get openmanage installed down to questions of sql and missing installation files. I'm not a DBA and that society relies completely on a sql server for all its activities on the day the day I don't want to change the Setup on sql server options.
OMSA didn't need SQL. I think that you install rather OME (OpenManage Essentials). OpenManage Server Administrator (Managed Node) is what you need.
You can do this on some newer controllers, but without knowing what system and controller you have, hard to say. Nothing more than 3-4 years need OMSA. You can also use a live disc OMSA to start education reconfigures.
-
RV180W add the access point with itinerant support
I have a client with a RV180w the latest firmware running. We currently use the router as a router and provide wireless access. We want to add a wireless coverage and I'm interested in our options. We have a network unifying ethernet that we could use to give the new connectivity LAN AP. Can buy us another RV180W and use it in AP mode and roaming wireless connectivity. The customer wants a guest and business WLAN so we'll use the VLAN of the router. How we set up the new AP? Should we use WDS? If we use WDS, can we still use WPA2? Thank you for your help.
Hello, Mr. Carl,.
Yes is possible to use WDS and WPA2 at the same time.
The master of accreditation will be setup as a RADIUS server to authenticate the other access points, while clients use the WPA2-PSK, which occupies the same on each access point.
Let me share with you the information found on WDS and the configuration of basic, found on the guide me section.
WDS configuration:
RV180W configuration:
If this answer is satisfactory to you, please mark it as response.
Diego Rodriguez
Cisco network engineer
Thank you
-
Add the second device with Windows 7
I installed windows 7, I already had vista, I have a monitor and a hanging flat TV. I used to be able to focus on the screen and it would show the two devices so watch TV on one and are working on others, now it's the thing same display on both screens? Why the other is not being recognized?
Press the Windows key + P
Then select Extend.
Or
Right-click on the desktop, and then select the screen resolution
Then in the menu next to several screens drop-down, select extend these screens.
-
Add the contact form with drop down
How can we add a contact form with the drop in muse
Use this free widget. It works very well!
-
Add the drop shadow with css?
is it possible to add a drop shadow with css? (more precisely to a label component)
Thank you!No, the shadows are implemented as filters, no styles. They cannot be resolved through CSS in Flex 3.
Matt Horn
Flex docs -
Add the new knives with the same service profile, but detect only 4 uplinks
We have the IOM-2008XP, and 2 blades of old B200M3 detected 8 uplinks (40G). We just added 4 new blades aB200M3 nd used same service profile as the old 2 blades. However, the new detected only knives 4 uplinks (20G). All that I missed to make 4 new knives to see 8 uplinks (40G)?
used blade
new blade
Wilson,
Could you please confirm that the blades have exactly the same network cards? Who can represent a change in the seen DCE interfaces.
-Kenny
-
Dear Sir.
While I have already configured the RAID 5 with 5 disks, then the OS (windows 2008 R2) installation step I saw 2 separate partitions. and can I install it on the partition with only 2 TB. Another, we can't. So during my installation completed OS, then I can use only 2 TB, for another volume is about 5 TB can't do anything. Can I do the RAID 5 with 5 disks (10 TB)?
I wait your helpful to my set.
Thank you.
silamayThis is new server, there is not any data yet so I can reinstall. What I want is that I just want to RAID 5 until I started my DC project. I already look for how to convert to GPT, but I'm not at all. I know that I can't convert GPT as the OS in the same disk but that is because I try to configure RAID 5 and OS, but while over OS I do not see another 5 to just see only 2 TB.I don't understand most of what you wrote. You must activate the UEFI (below), then convert to GPT before installing Windows.
silamayHow can I install on a UEFI system?The T610 supports UEFI, but must be allowed. Start the BIOS (F2) Setup and change the boot mode in the UEFI instead of BIOS/inheritance.
Your alternative is to create a RAID 5 using all disks, but the definition of the size as something as small as 2 to, then another RAID 5 with space remaining. Each table will be displayed in Windows as a separate 'drive' - you can then install normally in the smallest 'drive '.
-
Mr President.
My worm jdev is 12.2.1
How to enter two rows at the same time with different default values that only the first line to use see?
Suppose I have a table with four fields as below
"DEBIT" VARCHAR2(7) , "DRNAME" VARCHAR2(50), "CREDIT" VARCHAR2(7) , "CRNAME" VARCHAR2(50),
Now I want that when I click on a button (create an insert) to create the first line with the default values below
So if I click on the button and then validate the second row with different values is also inserted on commit.
The value of the second row are like the picture below
But the second row should be invisible. It could be achieved by adding vc in the vo.
The difficult part in my question is therefore, to add the second row with the new default values.
Because I already added default values in the first row.
Now how to add second time default values.
Concerning
Mr President
I change the code given by expensive Sameh Nassar and get my results.
Thanks once again dear Sameh Nassar .
My code to get my goal is
First line of code is
protected void doDML(int operation, TransactionEvent e) { if(operation != DML_DELETE) { setAmount(getPurqty().multiply(getUnitpurprice())); } if (operation == DML_INSERT ) { System.out.println("I am in Insert with vid= " + getVid()); insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE", (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100)); } if(operation == DML_UPDATE) { System.out.println("I am in Update with vid= " + getVid()); updateSecondRowInDatabase(getVid(), (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100)); } super.doDML(operation, e); } private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5) { PreparedStatement stat = null; try { String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " + "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } } private void updateSecondRowInDatabase(Object value1, Object value5) { PreparedStatement stat = null; try { String sql = "update vdet set AMOUNT='"+ value5+"' where VID='" + value1 + "'"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } }
Second line code is inside a bean method
public void addNewPurchaseVoucher(ActionEvent actionEvent) { // Add event code here... BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry(); DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator"); RowSetIterator rsi = dciter.getRowSetIterator(); Row lastRow = rsi.last(); int lastRowIndex = rsi.getRangeIndexOf(lastRow); Row newRow = rsi.createRow(); newRow.setNewRowState(Row.STATUS_NEW); rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow); rsi.setCurrentRow(newRow); BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry(); DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator"); RowSetIterator rsi1 = dciter1.getRowSetIterator(); Row lastRow1 = rsi1.last(); int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1); Row newRow1 = rsi1.createRow(); newRow1.setNewRowState(Row.STATUS_NEW); rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1); rsi1.setCurrentRow(newRow1); }
And final saveUpdate method is
public void saveUpdateButton(ActionEvent actionEvent) { // Add event code here... BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry(); OperationBinding commit = bindingsBC.getOperationBinding("Commit"); commit.execute(); OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit"); operationBinding.execute(); DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef. iter.getViewObject().executeQuery(); }
Thanks for all the cooperation to obtain the desired results.
Concerning
-
I use macbook pro.
I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.
Please help solve this problem.
This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.
-
VMDK is not displayed when you add the drive but shows on browse the data store
This may be a simple solution but my forehead hurts to hit my head against the wall and need your expert help.
Environment: running ESX 4.0 with 4 nodes in the cluster. Each node in the cluster has only one HBA card with double fiber connections that connect to both sides of FC SAN. There is not a fiber between nodes and SAN switch, so direct connect. Built two systems to support Exchange 2007 using the CCS. Using a FC SAN to shared disk space and iSCSI for disk space not shared.
Problem: have added 5 player glow spaces on System #1 using RDM and they appear. Try to load the same readers in the System #2. I am able to load 4 readers in the System #2 but the 5th disc (which is in fact the reader 3rd in the series) refuses to show when I added the player. The change settings - & gt; Add Hard Drive - & gt; Use the existing - & gt; Open the data store and the folder where the virtual machine from the system files and the folder where the LUN mapping lie as they are stored with the system. But at the opening of this file the LUN mapping in question is absent. All others appear. However when I right click to browse the data store outside of the settings and go to the folder where the LUN mapping for the virtual drive and it appears.
Attempts to resolve:
(1) have removed the drive and delete system #1 data store and we readded to the system = & gt; nothing.
(2) removed the disk without delete system data store #1 and it added (thus creating two virtual disks in the file for the system to the same LUN... xxx_3.vmdk and xxx_7.vmdk) = & gt; without success. (xxx_3.vmdk, nor xxx_7.vmdk appear when trying to add a player)
(3) tried to use a system not intended within the CSC Exchange cluster, attemtped to add the xxx_3.vmdk or xxx_7.vmdk and both appear as an option.
I am at a total loss. Do I need to trash the system no. 2 and rebuild? Is there a problem of possible system configuration #2 that does not allow him to see the two virtual drives? The #2 system configuration is corrupt? Do I have to power System #2 power on and off and then try to add readers? I can the virtual cycle vCenter system? Or I am much more of a noob that the answer is with myself and I can't see it? Any help would be welcome.
When you want to use RDM on hosts, please make sure lun the same number on hosts.
for example you have assigned the lun 3 host A storage, make sure that it is also the lun 3 to host b.
Let me know if it does not
Binoche, VMware VCP, Cisco CCNA
Maybe you are looking for
-
using FaceTime outside the UNITED Arab Emirates
I bought an iPhone 6s over 128 GB of Kabul in Afghanistan, but I have no FaceTime on it. When I google, I found that the iPhones in the UNITED Arab Emirates have no FaceTime. It's ok, but I want to use in Afghanistan should not be banned here. For yo
-
The title says it all. It will be interesting to see what has changed.
-
EThe rocketfish device doesn't seem to work
I downloaded, but cannot go into the details
-
List of XP Windows Add/Remove Programs fill
I'm running Windows XP and IE 7. Does my Add/Remove Programs list. I tried http://support.microsoft.com/kb/266668 and stuck on the addition of a few with the error message saying "Imgutil.dll was loaded, but the DllRegisterServer entry point was not
-
How can I solve this problem and have my admin and my user appear in the directory? My hard drive went out on me on my other computer, so I tried to slaves in the top of the tower. All other folders appear in my directory, but not users. There are