My users will not be displayed when I slave my hard drive with Vista on a computer running Windows 7.

Similar Questions

• Upgrade to Windows 7 - will be present take less space on my hard drive in Vista?

  I have a HDD partitioned - C drive only has 30 G - and I'm running out of space. The only thing on the C drive is Windows and any update of software that I can't install it on the other drive. (Auto updates of java, adobe, etc.)  Office, other software, I added are all installed on the second partitioned drive.

  I constantly receive updates Microsoft security - and it keeps taking more space.

  I think I deleted all unnecessary software.

  Upgrading to Windows 7 free up some hard drive space?

  Hi jehsc,

  Windows 7 is essentially Windows Vista with additional coding so it will not less space than Vista, it can take up quite a bit more. You cannot extend the partition (assuming you have unallocated space next to your current partition)? My system Windows 7 (Ultimate) as well as other software applications takes up 42 GB of space, but I allocated 200 GB of space for my Windows 7 Partition. Obviously the 200 GB is not really necessary, but I have the space on my hard drive, so I return to Windows 7. I do not, however, make like you and installed the software on a second partition. The main reason why I don't do it is because, frankly, I do not think that this happened so every advantage in terms of performance.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

  I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

  I have another drive, a 160g WD drive - it starts ok w / that a connected.

  Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

  both are sata drives - connected to the same sata port when I try of their

  "richiedude4444" wrote in message News: * e-mail address is removed from the privacy * .com...

  Nevermind - I found it for my # model/serial

  fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

  As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.

• Use as system photo library will not work on library migrated on external hard drive

  I've migrated my library of photos on an external drive to free up space.  I run pictures while pressing the option key.  Photos don't 'sees' the library on the external hard drive in order to "Choose library" is grayed out.  I select "Library" and it points to the photo library that has been copied to the external drive.  It opens and I see all my photos.  I then go to preferences and select "use as a library system.  Which turns gray.   I then released photos.  When I have photos of tenant he still does not recognize that I have chosen an external library such as my library system, and I have to repeat the whole process again to nothing does not.    My external drives are Seagate 4 TB comes pre-formatted under OS X log (Extended).  The photo album has been updated from iPhoto and now I also copy the album iPhoto on the same external drive in the case which has data that allows pictures to designate my photo album of external drive as my photo album of system.  However, I'd rather remove it because it takes up to 500 GB of hard disk space too.   I searched on the internet and other forums without success - seems to work just for everyone.  Help, please!

  This is the format that you see when you download info on the disc?

  pre-formatted under OS X log (Extended).

  I have not seen that - the correct format is as Mac OS extended (journaled)

  Please check that your is actually

  LN

• Media Player 11 will not play my music on my external hard drive

  I have all my music files on my external hard drive.  I organized them by band.  I can't make my Media Player read the external hard drive to play music.  I already went in Tools/Options/Library/monitor folders and added the file in there and who's going to add an external hard drive in the list of watched folders, but when I go to my library all my music isn't here.  I tried to move the 'my music' folder on my external hard drive so that it points to this folder automatically and that no longer works.  I am now at a loss.  Help, please.  Thank you.

  Hi protectingtheus82,

  We may have to rebuild your media player library, such as maybe he went corrupt. Please follow the steps outlined in the article below to solve the problem.

  You cannot view, add, or delete items in the library of Windows Media Player 11:

  http://support.Microsoft.com/kb/925718

  Please let us know if this has been helpful.

  Concerning
  Rehman - Microsoft Support

• If I install 10.11.6 on my iMac I will be able to boot from an external hard drive with and OS earlier?

  If I install 10.11.6 on my iMac (model identifier: iMac12, 2 name of the processor: Intel Core i5 speed processor: 3.1 GHz)

  will I be able to boot from a drive external firewire with and the older operating system? Or El Capitan will not allow this as I said can occur. Can't risk a "pourrait".

  Thank you

  There should be no problem. Your iMac is come with Snow Leopard as well as or any subsequent OS should work. Note however, that once started from SL, your interior with El Capitan would be is no longer recognized as a boot device in the preferences > startup disk because Snow Leopard does not have logical volume by car Group organization. You need to restart with the Option key pressed down, calling the Boot Manager.

  If you have problems, you might consider to make the connection via the USB port.

• SWF will not be displayed when downloaded

  I'm putting a swf file in my web page.  Pretty basic, I know.  My problem is when I download, it does not appear.  It displays very well when I test it locally.  In IE, the blue circle just keeps spinning.  In other browsers, it just doesn't show up.  I've never had this problem with cs4, so I think that there is something new that I'm missing.

  The file banquet_merge.swf is missing or was not downloaded in the folder 'flash' on your web server.  Looking at the page, the following files are also coming up not found on the loading of the page:

  • Calendar.CSS
  • Calendar.js
  • images/checkRes.jpg
  • SWFObject.js

• I'm not able to take photos with my iPhone, but I have enough storage. No warning, all messages will not be displayed when I click to shoot.

  iPhone 6 s

  iOS 9.3.1

  If you use one, remove the case to see if you can take pictures.

  If you do not use a case, try a reboot of the force.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to take a picture.

• SD card will not be displayed, when it is connected to the car radio

  SD card works fine until I connect it to my car stereo system... it will only read what's on the internal memory of the player... This is how the player or is there a way to make it visible to my car stereo?

  danimal425 wrote:
  SD card works fine until I connect it to my car stereo system... it will only read what's on the internal memory of the player... This is how the player or is there a way to make it visible to my car stereo?

  You are the GROUND.

  The music library is therefore more a single unit on the Sport Clip.

  The card must be accessible regardless even on the Sport Clip itself.

  The completely artificial limts placed on the block by SanDisk are meaningless.

  It is clear that absolutely no market or focus group research work went into the design of the product.

• I get a black screen when executing my virtual hard drive on virtual PC 2007 xpmode in Windows 7pro

  I get a black screen my virtual hard drive running on virtual PC 2007 xpmode, I can see the windows xp startup screen, but then it goes black.  There are no errors.  If I go to the mode full-screen image of the screen appears for a second, then it goes black again.  Y at - it a setting or something escapes me?  The virtual hard disk was created using an image of my old laptop XP using Disk2vhd.  I had success in the past using this on another windows 7 based PC.

  Hi Paul,.

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet (Windows Virtual PC and XP Mode)

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this information helps.

• home page will not be displayed

  I downloaded firefox 12 now, it will not be displayed when I try to open that a page with lots of info but no home page

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/websites+look+wrong
  • https://support.Mozilla.org/KB/Firefox+cannot+load+websites+but+other+programs+can

• my pc will not boot up when I run the disc to recover its says cannot find hard drive

  my pc won't start recovery disc tried tried

  Windows 7 disk but will not work it says can't find hard drive

  Sorry do not know all the details of my pc

  I am not basic pc user

  Thank you

  If you use your PC manufacturers recovery disks and don't see "no hard disk" the chances are that the hard drive has failed.

  When you try to boot your PC normally what exactly is the error message?

• HP pavilion dv7-7012 simple pass of Baikonur will not be displayed?

  I can't get into simple pass when I start. QuickLaunch page will not be displayed when I slide my finger? Thanks for your help, Howard

  What happens when you drag your finger to load the program?

  You receive error messages? If so, what are they?

  It works if you manually on the site which was on SimplePass and use the fingerprint reader to connect?

  Quicklaunch page, referring to the SimplePass program?

  Have you tried the SimplePass program is up to date? Here is a link to the new HP software for your laptop if you need. Try installing the latest version.

  Let me know what happens.

• Windows user login will not be displayed

  Laptop Acer 5742 G (upgrade to 1 TB HARD drive)

  Problem: User login Windows is not appear.

  History:

  I wanted to fast my laptop at the start and so I did the exercise verified and I edited programs and services to load at startup, after that I got a new start, all services were disabled, put them on automatic and I run even if that bit of wouldn't start. After that System Restore might work, I restored it 2 days ago. He didn't restore properly because my anti-virus has been on and so I closed and he again. Now every time I boot my OS the Windows user login will not be displayed even in Mode without failure or last good Configuration, it keeps black.

  What can I do? Thanks in advance...

  
  And in the meantime when I continue to press ALT and quickly hit F10 for eRecovery Acer in the trunk, will not work as well.

  Hello BrickBone,

  You need start using the Windows 7 installation disc and try startup repair options.

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you are using Windows or the USB flash drive installation disc, click on repair your computer.

  6. Select the Windows installation you want to repair, and then click Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Select the Startup Repair option.

  Let us know if that helps.

  Marilyn

• When I go on animate / flash it will not timeline display

  Hello

  I opened the flash and the tool and the timeline bar will not be displayed. I tried pressing Windows and access it from there, but when you click nothing happens. I can open my work but make no changes. I then updated to animate I was wondering if that would allow to settle, but it obviously didn't.

  any advice would be great

  Kirsty

  Have you tried resetting the workspace? (Window-> workspace-> choose a)