Reference Dell T610 with 5 hard drive problem (5x2TB) while create RAID 5 with all the HARD drive. :(
Dear Sir.
While I have already configured the RAID 5 with 5 disks, then the OS (windows 2008 R2) installation step I saw 2 separate partitions. and can I install it on the partition with only 2 TB. Another, we can't. So during my installation completed OS, then I can use only 2 TB, for another volume is about 5 TB can't do anything. Can I do the RAID 5 with 5 disks (10 TB)?
I wait your helpful to my set.
Thank you.
silamayThis is new server, there is not any data yet so I can reinstall. What I want is that I just want to RAID 5 until I started my DC project. I already look for how to convert to GPT, but I'm not at all. I know that I can't convert GPT as the OS in the same disk but that is because I try to configure RAID 5 and OS, but while over OS I do not see another 5 to just see only 2 TB.
I don't understand most of what you wrote. You must activate the UEFI (below), then convert to GPT before installing Windows.
silamayHow can I install on a UEFI system?
The T610 supports UEFI, but must be allowed. Start the BIOS (F2) Setup and change the boot mode in the UEFI instead of BIOS/inheritance.
Your alternative is to create a RAID 5 using all disks, but the definition of the size as something as small as 2 to, then another RAID 5 with space remaining. Each table will be displayed in Windows as a separate 'drive' - you can then install normally in the smallest 'drive '.
Tags: Dell Servers
Similar Questions
-
Reference Dell pc with xp family. Restart to the logon screen
Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?
Peek into the registry to find clues.
Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information. Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.
1. right click on my computer and select Properties.
2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
3 clear the automatically restart box and OK your way out system properties.Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.
How to configure Windows XP to start in a "clean boot" State
John -
Reference Dell T610 PERC 6i - very slow RAID rebuild
Hi all, I have a DELL T610 with a Controller PERC 6i with 4 x 1 TB SAS 7.2 K disks configured as a RAID6. 1 of the drives has failed, I installed the new drive, but reconstruction is only 44% after 36hrs! Why is it so slow? Any ideas would be greatly accepted.
RAID 6 is well known for its performance of poor\slow. This is the only function is to be safer than RAID 5, not to be fast and cheap. With parity RAID, to rebuild the whole picture. They have been known to go for a week or more before they are finished, according to the size and speed of players.
Kind regards
-
2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.
You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.
-
Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
FF 4.0. Flash menus such as a key is maintain pressed making it inaccessible. The problem persists with all the plugin disabled. Firefox box top left appears. The old logo FF show instead.
Fact to uncheck use hardware acceleration helps in the Firefox menu > options then in the window of Options - Advanced tab > uncheck the box 'use hardware acceleration when available' stop the problem does not happen.
Advanced panel - accessibility, navigation, network, updates, and other advanced settings in Firefox
-
my printer did not come with all the cables needed to connect to my computer
I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless
Hello.
Our printers do not come with USB cables. If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection. It is a pretty common cable located at most major retailers office supply or electronics.
The iP2820 can only be used with a USB connection. It doesn't have wireless capabilities.
It has not responded to your question or problem? Find more help contact us.
-
original title: I have a white desktop with all icons and task bar, but can't set a background. Nothing happens when I right click on the desktop to adjust only the properties please help
We have a white desk with all the icons and taskbar. Everything I've looked up tells me to enable desktop but nothing happens when I right click so I'm unable to get the properties of office, I also tried to do system restore and also a reactivation on the desktop but nothing. Please help any suggestions would be helpful.
Hello Carlapalsrok,
Thanks for your post. You experience this problem on all user accounts? If you have not tested, try the following:
Click Start > right click on my computer > select Manage
Expand local users and groups
Click on the users folder > in the right pane, right-click and select new users
Fill in the appropriate data to create a new user account.
To disconnect from the computer and log on as the new user
You still see the white background?
We can't wait to hear back on your part.
See you soon
-
original title: destop icon problems, I created a shortcut icon to my favorites... I'm done with ALL the Favorites as separate icons on my desktop. I can't see even my previous icons or my screen saver picture... It is under the many many icons off my favorites folder. How can I get rid of them all at once rather than individualluy... which will be forever! @!!! ???
I created a shortcut icon to my favorites... I'm done with ALL the Favorites as separate icons on my desktop. I can't see even my previous icons or my screen saver picture... It is under the many many icons off my favorites folder. How can I get rid of them all at once rather than individualluy... which will be forever! @!!! ???
See if you can get out of this mess by doing a system restore. Choose the date until you have created this shortcut as you restore point.
In case you need the "How to":Start button > Search box, typeSystem Restore > press enter > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
To sit and wait. The machine restarts when it's done.For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
I tried to buy the creative cloud with all the included applications and I wrote my bank details and its been "approving or looking" for my card for an hour.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
-FINISH WITH-
BLUE BUTTONS
Hello!!!
Episodes of APPLE TV2
-J' got about 120 left to watch! -
I want to finish with all the BUTTONS BLUE shown next to all my TV episodes, all of which are showing I still have not watched one of these episodes.
I tried marking them all as "Unwatched" on my iTunes player - that works very well on the iTunes Player on my MAC, but, yet, "blue keys" still appear on the AppleTV2.
- Can I do away with this blue button manually?
- Or should I, in FACT, go through the MANDATORY hassle to watch each episode individually?
- Is alternative and using Player like QuickTime, actually do the work?
Select the TV program, press in and hold the Center button on the remote and choose Mark as watched in the context menu.
-
Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions disabled, then deleted. Sometimes it hangs for five minutes. I checked the PC with several types of scanners of evil-ware, but none to be found. All hidden and deleted cookies, all DELETED & extension plugins. Remove all instances of Firefox PC and registry, then restored to bookmarks. The only thing that I did not is to remove and reinstall not my favorites.
Windows Vista (yes I know) and FF 13.0.1Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://hacks.Mozilla.org/2010/09/hardware-acceleration/
-
Firefox 8 ads make it look good with all the possibilities. But when installed it's like the old Firefox and the news is simply not there. Why bother to install the most recent?
Right-click the menu bar and uncheck the option menu bar.
-
Buy Windows 7 with all the drivers?
Is it possible to purchase Windows 7 at Toshiba with all the drivers of Toshiba laptop for some?
Hello
I think you mean a Toshiba Recovery disk that already contains all drivers for your laptop. Is this good?
Well, I put t know what laptop, you have exactly, but you can order a preinstalled with OS recovery disk from Toshiba. If your computer laptop wasn t comes with Windows 7, you can order such a recovery disk.
Anyway, but you can get all the drivers here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers -
Adding timestamp with all the elements of a 2D array
Hello
I want to add a stamp in real time with all the elements of a 2d array before writing on a worksheet. My 2d array consists of amplitude and frequency.
kindly guide me how to do this.
Best regards
RASHID
That it should be now.
Kind regards
Kevin
Maybe you are looking for
-
How can change starting with wireless keyboard
If you use a wireless keyboard, how a start in recovery (CMD - R) Mode or disk mode target (T)?
-
My photos got mixed after upgrade to El Capitan
Yesterday, I downloaded pictures from my camera to my iMac. They added automatically the photos I had taken on my iPhone (through the cloud) today, I upgraded to El Capitan, in order to take advantage of the improved editing capabilities. Today, so
-
Satellite Pro A200 with Vista is not another mobile network XP
I have the Satellite Pro A200 Toshiba and I have some problems with the network.The Inernet is upp and go, but I can't find the other computers on my network. Im having 3 other computers on the network. The A200 is having Vista and the other has just
-
Tecra A7 - keyboard and Touchpad do not work after standby or Hibernation
I have a Tecra A7 to XP. Once time and a some time to wake up from sleep or hibernation, the keyboard and the Touchpad mode do not work. I can always open a session using the recognition of fingerprints. An external USB mouse and then also works. I h
-
can I use a graphics tablet mono price on my macbook pro?
I got a new Tablet Monoprice for Christmas and I want to use it with my macbook pro. Since there is no disk drive to load the software, how do I use on my laptop? is there a software online for me to use? TIA!