List of XP Windows Add/Remove Programs fill

Similar Questions

• How to uninstall Java 2 Runtime Environment, SE v 1.4.1_01 who not listed in Add / Remove programs?

  I need to uninstall Java 2 Runtime Environtment, SE v1.4.1_01, which is detected by Java, but is not listed in the window add / remove programs. I already followed all the instructions given by Java, but I could not find the registry after running regedit HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/uninstall.

  Thanks in advance!

  Hi Alvaro_900,
   
  -Which is the key that you can't find?
   
  You can find the uninstaller for Java folder in the C:\Program Files\InstallShield Installation Information folder.
   
  Try to uninstall it from there and check.
   
  For more information, see:
  After uninstalling Java, how to remove its entry in Add/Remove programs?

• Windows XP Add Remove Programs opens, but the list of programs will not appear?

  Windows XP Add Remove Programs opens, but the list of programs will not appear? Can check the programs add and romove, but when the next screen appears to list all installed programs nothing happens, it just says: waiting will list is bieng prepared, expected 15 minutes still nothing, never had this problem before. Thank you

  Alas...

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Click Start, run and enter the following command:

  regsvr32 appwiz.cpl

  Click OK and you should see a message like this:

  DllRegisterServer in successful appwiz.cpl

  Restart and see how things look now.

• Windows Vista 64 question about icons in list Add/Remove programs?

  Hey there's good people!

  Today, I downloaded Adobe shockwave! Its works fine, but I have notice that in Add / Remove program list Adobes program shockwave has just an icon of plain to her as regular window uses HP Notebook Laptop mind no way. Now, there are computer I have Adobe sockwave shown an icon perfect symbol that represents its screen. Is this a normal behavior of Vista 64 does not give me the image of the shock wave which is that on my Dell computer?

  Or can I get it to show? Please feed me back peepz!

  Thank you!! Yours trully Vally Pally

  Try to rebuild the icon Cache and see if that helps.  Here are the procedures:http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.  I thiink this will bring all the special icons, including the one you're looking for.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista 64 Edition Add / Remove Programs list issue?

  Hey there my good people!

  Today I downloaded Adobe Shockwave program on my laptop HP man love works perfectly, those I notice that, in the list add/remove program icon beside the Adobe Shockwave is simply window. Now, is this normal behavior for laptop and windows vista 64 to show this type of indication. I have noticed on my Dell computer the Adobe Shockwave represents its full screen and icons hows everything from texture. Is this right? those can't have or something is missing and how I can get it for my laptop?

  Thank you very much for your attention, please hit me peepz back and made me know wat is in place!

  Yours trully Vally Pally!

  Brothers and sisters love

  You have several answers in your other thread: http://social.answers.microsoft.com/Forums/en-US/vistaappearance/thread/d92288f4-0a8a-4d9c-9906-ce0755614fed.

  Please post a question only once in these forums.  Unlike chat rooms, posting several times not you will get answers more quickly.  In fact, because the responses and the responses can be split between multiple threads, it can take even more time before you get the answer you want and you will probably see the same recommendations and requests further information in multiple threads (and when a notice of the administrator, the son will be merged anyway).  Please be patient and someone will get back to you later.  It also makes it more difficult for people seeking answers to similar problems, because they think that they have several different situations that could help them when in fact it's the same situation only duplicate and so they must travel more threads - and is not good.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why the my Add/Remove Programs list is empty?

  I had trouble getting the updates of windows install, and now I noticed that my Add/Remove Programs list is empty.

  See if this article helps you:

  "Add/Remove Programs tool displays installed programs correctly"
    <>http://support.Microsoft.com/kb/266668 >

  "Add and remove programs appears white OR takes a long time to fill in the information."
    <>http://support.Microsoft.com/kb/2249920 >
  HTH,
  JW

• Free space on my Add/Remove Programs list.

  Add/Remove Programs list my I have a microsoft. NET framework 1.1, and then service pack 2 microsoft 2.0 framework finally framework 3.0 service pack 2.0 microsoft... question is do I have all the three for what these programs are run or can I release a few MB, but 2 uninstall?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  See...

  Aaron Stebner's blog: Mailbag: need should I even older versions of the .NET Framework on my system after installation of .NET Framework 3.5 SP1?
  http://blogs.msdn.com/astebner/archive/2009/04/20/9557946.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates, mainly updates, which are manually downloaded and installed see the square Windows XP - &#62; Control Panel - &#62; Add / Remove programs. ?

  Updates, mainly critical updates, which are downloaded and installed manually appear actually Windows XP-> Control Panel-> Add / Remove programs. I use NO automatic update of Windows. I run a batch file to install more than 20 + critical updates, but none of them are showing up for me in the list "Add / Remove Programs". Yes, I have the check box 'Show updates' checked. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  Yes. They should display Control Panel Add or remove.

  TaurArian [MVP] 2005-2010 - Update Services

• I have Windows XP home edition, error: process id = oxle98 (7832) Threadid = 0xlab8 (6840), when updates download sp3 it is impossible to install... because it is already installed according to 'Add/Remove Programs ".

  I'm having a problem with windows XP Edition family and service pack 3. In "Add/Remove Programs", it lists ServicePack 3 as it is installed, but when I download updates, it's always there needing to be installed... when I try to turn off my computer it always tries to install which in fact clinging and unable to turn off if I have to disconnect the whole shebang. I tried looking through the help and tried to look at things, he suggests to delete first, but I do not have these bugs, programs, issues. I want to fix this if possible. The error message is: Processid = 0xle98 (7832), Thread = 0xlab8 (6840)

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

   

  This problem can occur if the service pack is not installed correctly, so uninstall us the Service Pack 3 (SP3) to your computer and try to download the standalone package and try to install and control the issuance

  To uninstall SP3, you can follow the link provided below.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Now, you can follow the below a level provided to download the SP3 on your computer.

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Can I remove updates safely from the last 3 years for Microsoft and windows? From Add/Remove programs

  I was in my Add/Remove programs and I see updates 3 years back for windows and microsoft and they take place, so I would like to know if it is safe to delete all of these updates from my computer. If they are updates would be the most ancient not be updated to a newer version. I was told not to ever take off, but they fill the computer then why we have to keep?

  Another copy of http://answers.microsoft.com/thread/4ef772ca-bc5d-e011-8dfc-68b599b31bf5

• KB2728973 does not appear in the list, add / remove programs

  Hi, I am using Windows XP Media Center Edition with service pack 3 is installed, and KB2728973 is displayed as being installed on the Microsoft update site, but KB2728973 does not appear in the list, add / remove programs. The rest of July for Windows XP updates appear as being installed on the two site update of Microsoft and adding list / remove programs, it seems strange that KB2728973 does not work. It is important that KB2728973 does not appear in the list of add / remove programs? or do I need to do more to install it? I also tried to manually install the KB2728973, but again, he did not appear in the list Add / Remove programs. I understand that there is a position similar to mine, but I read it, and I realized that the question of the poster was a bit different from mine. I also wanted to take the time to mention that the automatic updates of Windows listed KB2728973 as being installed successfully, but it always seems strange that KB2728973 does not appear in the list, add / remove programs. I also checked in C:\WINDOWS, and there wasn't any folder $NtUninstall to KB2728973. Oh, and Yes, I have "Show updates" checked in Add / Remove programs.   Contribution to this issue would be greatly appreciated.

  It is normal that some updates to not appear in the list of add / remove programs in the control panel for various reasons, but in this case, it will update the entries in the untrusted certificates store then to see if it is installed, you can check if the newly revoked certificates are listed.

  Here is a link to a page that explains the changes he brings (the certificates that have been revoked):

  [url] http://technet.microsoft.com/en-us/security/advisory/2728973 [url]

  Scroll down to the section that has the right:

  How can [B] after you apply the update, I check the certificates in the Microsoft Untrusted Certificates Store? [/ B]

  If you have no events in Event Viewer, you can open IE and click on Internet Options - Content tab - then in the Middle under "Certificates" click on "Certificates" and then click on the arrow to scroll to the right and click the "Untrusted publishers" tab.  You should see all those listed in the MS article here.

  It also creates this key in the registry:

  HKEY_LOCAL_MACHINE\Software \Microsoft\Active Setup\Installed Windows\ {C3C986D6-06B1-43BF-90DD-BE30756C00DE}

  where it lists what Windows Update of roots revoked.

• In "Add/Remove Programs" he has no option to remove when a program is selected in the populated list?

  I can see all of the programs listed in Add/Remove Programs option in the control panel.  When I select a program in the list, there is no option to remove / uninstall the program.  I tried a lot of programs and none give me the option?

  Hello
   
   
  Method 1.
  Reregister the install and check engine.
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver
   
   
  Method 2.
  Check if you can in safe mode. Note: you will not be able to uninstall programs in safe mode. It's just to check if you can.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 3.
  It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  Method 4.
  See also the steps listed in the article below.
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to uninstall a program in Add/Remove programs which does not list the option "Change/Remove.

  > I'm trying to uninstall and reinstall my HP printer.

  > In my Add/Remove Programs list, there are several HP programs listed and I started to remove them (has done this in the past with no problems).

  > The last of them, I clicked on delete does not give me the options to 'Change/Remove '. The program is called "HP PSC700 Series" and seems to be the main

  part of the installed software - it is a 243Mbs size.

  What I tried:

  > I have reinstalled the printer from the CD program in the hope that it can replace every thing and then I could uninstall correctly - that didn't work.

  > Look in C:\Program Files - there was no Hewlett Packard folder

  > Look in the start menu > all programs - there was a list of Hewlett Packard who has expanded the. When extended out, he said "empty folder".

  > Posted the problem on the HP Forum twice in two months, got no response.

  > Learned how to remove the registry keys under "Software" in HKEY Local Machine and HKEY Current User. Also under HKEY USERS > default > Software.

  None of this has worked.

  > Gave a link to a family member to Support MS - "How to manually remove programs from the Add/Remove tool" I followed these instructions and

  the program remains still present in Add/Remove programs.

  Does anyone know how I can remove this program that has no program folder, no registry keys, but still works? I can still print from this computer, but cannot access the HP Director (a function to scan, print, clean & align print head, etc.), which is what started this process of trying to uninstall/reinstall the program.

  Any help would be greatly appreciated...

  Photo TakerYN

  My system is;

  Dell Dimension 4550

  Windows XP Pro w/SP-3 (version 2002)

  Of photo TakerYN...

  This message can be considered "solved!" I was finally able to remove the program with the HP disk. I tried to reinstall (overwrite) the program, but I received a message that the installer has detected that the program is already installed. I wanted to try it manually, so I 'opened' the disc, you click on "setup" and received the same message. At this point, I was ready to try anything and noticed the "Launcher" icon and thought, what the heck, can't hurt to try at this stage, so I clicked it. I wasn't expecting the screen, I had, who said that it would be to uninstall the program. I thought it was too good to be true and easy way (after all), but after that it's over, I checked my Add/Remove programs and my 'problem' program was gone.

  Thought I would post this so anyone who might encounter the same problem can try this.

  Photo TakerYN

• Windows will not display the programs that are installed in the area Add / Remove programs

  I tried to install firefox, then I change my web page. It reported a script error when loading. The program runs, but not right so I removed and tried again with the same result. It runs in the safe is no no not sure what it is.

  Now I can't run add it / remove programs in the Control Panel, it will be no fill. I can leave this mode and run what seems normal.

  Thanks John

  Hi Tubethumper,

  1. the Add/Remove Programs list is empty?

  2. you receive an error message when you access Add/Remove programs?

  3. do you still receive error loading Firefox?

  See the Microsoft article below and run them the fixit tool available, check if it works.

  Incorrectly, Add/Remove Programs tool displays installed programs

  http://support.Microsoft.com/kb/266668

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Withdrawal of obsolete lists in the Add/Remove program list?

  I'm working on the clean-up of an older system running Windows XP Pro. The system has two hard drives... whose the second crashed and burned in a fatal way. Software that has been installed on the second drive hard disappeared and is not installed on the replacement drive. The problem this presents, although perhaps minor but annoying, however, is that programs that were on the second disc appear on the Add/Remove Programs list, accessed via the Control Panel, even if they are no longer really exist on the system. Is there a good way to clean the list add/remove program entries for programs that have been lost and never be recovered due to a failure of hard drive like that? Also, are there any other proceedures recommended to clean all traces of system programs that have been lost in this way? Try to remove the traces of these programs using the Add/Remove list does not of course because the entries in the list of reference locations and files that no longer exist.

  Thank you.

  I'm working on the clean-up of an older system running Windows XP Pro. The system has two hard drives... whose the second crashed and burned in a fatal way. Software that has been installed on the second drive hard disappeared and is not installed on the replacement drive. The problem this presents, although perhaps minor but annoying, however, is that programs that were on the second disc appear on the Add/Remove Programs list, accessed via the Control Panel, even if they are no longer really exist on the system. Is there a good way to clean the list add/remove program entries for programs that have been lost and never be recovered due to a failure of hard drive like that? Also, are there any other proceedures recommended to clean all traces of system programs that have been lost in this way? Try to remove the traces of these programs using the Add/Remove list does not of course because the entries in the list of reference locations and files that no longer exist.

  Thank you.

  Download ccleaner from piriform. Click Tools > uninstall. Highlight the entries that appear, but is really installed. Then choose Delete. Reformatting is an extreme measure for a simple issue resloved. Regarding running the ccleaner registry cleaning tool, that I personally used for several years without a single incident. This does not apply to all the registry tools however.

  CCleaner - home

  It is also a trustworthy tool.

  Glary Utilities | GlarySoft

  Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/