Add the driver of Microsoft Canon Pixma iP5000

Similar Questions

• Qosmio G30: How to add the driver RAID without floppy drive?

  I'll put win xp tomorrow, as far as I can remember I will be asked to insert a floppy with additional RAID/SCSI drivers - I guess I need some drivers for XP see my RAID stripe.

  I was able to download 'raid-drv-qog20-xp - 1380.zip', but I'm afraid to look if my laptop has a floppy drive... How can I add the driver did not have a floppy drive?

  Hello

  Maybe a stupid comment, but if you can buy Qosmio G30 I presume that you can also get a used floppy disk. I did this a few times with Vista and Qosmio G30 and it works well.

  Check eBay. You will get the drive used for a few euros. Otherway tries to create CDs and if the RAID drive must travel to ODD, I didn't try because I have a FDD, but you can test it on your Qosmio.

• Lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead?

  I lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead? It is a mac.

  Thanks for any help or ideas.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_corporate_graphics_art_p...

• Win XP will not find the driver for my Canon Sx10 camera.

  Windows XP will not load the driver for my Canon SX10 camera. I had the camera for 3 years and have never had a problem with this load. I reinstalled XP and the same problem. Windows recognizes the camera but will not load the driver for it.

  I'll in Device Manager through the update hardware wizard I have try to install the driver manually, but I don't get the option of all available drivers.

  There is no drivers for this camera online, because I thought that Windows has the driver for this device.

  Thanks for the help,
  Ian

  Thanks for the reply. I reinstalled windows and it works fine now. I didn't want to go through the hassle of reinstalling everything.

  Ian

• Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer

  Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer

  And it is a Windows problem why?

  http://www.USA.Canon.com/Cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/digital_rebel_xt#DriversAndSoftware

  P.S., A lot of people just leave the CF card and use a card reader:

  http://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=CF+card+reader&x=0&y=0

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=40000069%20600021611%20600031471&IsNodeId=1&name=external

• How can I install my Canon Pixma iP5000 on Windows 7 if the updates of Windows has been disabled by the administrator of my system?

  Separated from this thread.

  Hello

  Windows Update is grayed out (disabled) by my administrator. It is because they do not want MS update 74000 world machines to be updated without testing what the effect of patches). However, add a personal printer to our laptops is not against the policy of the company. So now, I have a printer that is useless for the work, because there is no right way to download the drivers?

  Hello

  You can try to contact Canon directly to see if they can provide the driver directly-

  http://www.Canon.co.uk/Support/consumer_products/telephone_numbers/#.

  (check the right geographic region at the top of the page if necessary).

  If this isn't the case, I suggest that you contact your system administrator for advice.

  I'm sure you understand, we cannot provide methods to circumvent / denying policies defined by the administrators of the system on the Microsoft forums

• I can't install the driver for my Canon iP2702 printer, which has stopped working.

  I bought a new one, same model, same problem. It works on another pc, but I can't just install the driver of any method. I also tried a different model (Epson C86), same problem. I restarted the print spooler, delete the registry files before reinstalling, tried to use the disk, using the latest version of the following driver from Windows Update Wizard "add a printer" - nothing works. Can someone please suggest a solution? I can not "add a printer", who immediately said "not responding". If I restart the spooler, it progresses to the next page, where I can choose only "use an existing port", but having said "Operation could not be completed.

  Have you tried to download and install the latest Vista driver on the Canon site (instead of using the CD or Windows Update) here:

  http://www.canon.co.uk/Support/Consumer_Products/products/printers/InkJet/PIXMA_iP_series/PIXMA_iP2702.aspx?type=download&page=1 ?

• Impossible to install the CD for printer Canon Pixma MG5320 on Windows 8

  Windows 8 is a strange beast!

  Just bought a Canon Pixma MG5320 to go with my new Inspiron 2330 Touch all-in-one printer...
  After SEVERAL TRIES, it will not download CD Canon!  Somehow, with the USB printer, it will print BUT I can't analyze;  not the end of the world, but I pay $100 + $ for the 3-in-1 printer and would like to get some use out of it other than the printer option.
  There, can someone help me? It's the guest who stops at all of the company:
  "DRIVER IN USE. IF YOU DO NOT USE THE PRINTER DRIVER, IT CAN BE USED BY OTHERS ON THIS COMPUTER.  QUIT ALL APPLICATIONS AND THE PROPERTIES OF THE PRINTER, AND THEN TRY AGAIN.
  IF YOU STILL HAVE A PROBLEM, RESTART THE COMPUTER, AND THEN TRY AGAIN. »
  Well... that has not worked.
  Always prints.  No sweeping.
  Little help!

  I had the same error: printer in use driver. If you're not... bla... bla...

  My printer is Pixma MG3170

  Here's what I tried and it worked for me:

  1. go to usa.cannon.com and download the respective printer for your printer driver

  2. run

  Note: it takes time for the whole installation to complete, but be patient.

  Rgds,

  Andy

• A problem has been detected during an attempt add the driver in the store.

  I try to install the Netgear WG311, who says that it's compatible with Win7 and the driver is included in Win7.  I get the above error.  The hardware id is the following:

  PCI\VEN_11AB & DEV_1FAA & SUBSYS_6B001385 & REV_03
  PCI\VEN_11AB & DEV_1FAA & SUBSYS_6B001385
  PCI\VEN_11AB & DEV_1FAA & CC_020000
  PCI\VEN_11AB & DEV_1FAA & CC_0200

  Any help to solve this problem is greatly appreciated.  Thank you

  Hello

  Go to the link below for info on the problem.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Netgear%20WG311%2054%20Mbps%20PCI%20Wireless%20Network%20Adapter&v=Netgear&uid=WG311T&pf=0&pi=0&s=Netgear%20WG311&os=32-bit Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• How to add the driver to the computer for my microphone?

  original title: I accidentally delete the driver microphone on my Toshiba computer, how to make my microphone work again

  I accidentally delete the driver microphone on my Toshiba computer, how to make my microphone work again

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• VMDK is not displayed when you add the drive but shows on browse the data store

  This may be a simple solution but my forehead hurts to hit my head against the wall and need your expert help.

  Environment: running ESX 4.0 with 4 nodes in the cluster.  Each node in the cluster has only one HBA card with double fiber connections that connect to both sides of FC SAN.  There is not a fiber between nodes and SAN switch, so direct connect.  Built two systems to support Exchange 2007 using the CCS.  Using a FC SAN to shared disk space and iSCSI for disk space not shared.

  Problem: have added 5 player glow spaces on System #1 using RDM and they appear.  Try to load the same readers in the System #2.  I am able to load 4 readers in the System #2 but the 5th disc (which is in fact the reader 3rd in the series) refuses to show when I added the player.  The change settings - & gt; Add Hard Drive - & gt; Use the existing - & gt; Open the data store and the folder where the virtual machine from the system files and the folder where the LUN mapping lie as they are stored with the system.  But at the opening of this file the LUN mapping in question is absent.  All others appear.  However when I right click to browse the data store outside of the settings and go to the folder where the LUN mapping for the virtual drive and it appears.

  Attempts to resolve:

  (1) have removed the drive and delete system #1 data store and we readded to the system = & gt; nothing.

  (2) removed the disk without delete system data store #1 and it added (thus creating two virtual disks in the file for the system to the same LUN... xxx_3.vmdk and xxx_7.vmdk) = & gt; without success.  (xxx_3.vmdk, nor xxx_7.vmdk appear when trying to add a player)

  (3) tried to use a system not intended within the CSC Exchange cluster, attemtped to add the xxx_3.vmdk or xxx_7.vmdk and both appear as an option.

  I am at a total loss.  Do I need to trash the system no. 2 and rebuild?  Is there a problem of possible system configuration #2 that does not allow him to see the two virtual drives?  The #2 system configuration is corrupt?  Do I have to power System #2 power on and off and then try to add readers?  I can the virtual cycle vCenter system?  Or I am much more of a noob that the answer is with myself and I can't see it?  Any help would be welcome.

  When you want to use RDM on hosts, please make sure lun the same number on hosts.

  for example you have assigned the lun 3 host A storage, make sure that it is also the lun 3 to host b.

  Let me know if it does not

  Binoche, VMware VCP, Cisco CCNA

• Cannot add the drives shared to the cluster nodes

  ESX 3.5

  I am trying to set up a cluster "2 nodes in a box". According to the guide of cluster (http://www.vmware.com/pdf/vi3_35/esx_3/vi3_35_25_u1_mscs.pdf), I created the shared disks (quorum & data) using:

  vmkfstools .vdmk - c

  The discs create successfully and I can see them at VIC, but when I add the disk to the virtual machine, it appears in the selection window.

  Any ideas?

  Oh! The mistake was all the time under our noses

  vmkfstools - cdmk Kala

  VMDK, not VDMK

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Uninstalled the driver of "Microsoft Composite battery" by mistake. How to install it again.

  I uninstalled by error driver "Microsoft Composite battery." How can I install it again?

  In Device Manager, under the Batteries there should be 3 drivers:

  1 - Microsoft AC adapter

  2. compatible ACPI Microsoft control method battery

  3 - battery Composite Microsoft<------------ i="" uninstalled="" this="" 3rd="" one="" by="" mistake="">

  Now it is not showing me the battery down icon to the right.
  It does not show... If my laptop is plugged or not
  It does not show what is my battery left...
  Basically, the icon itself is missing...
  What a fool I am.

  Now how can I get that back?

  I tried many things but not able to find how to install it again.
  I have received no driver CD with my Sony Vaio.

  Please please please help me.

  This solved my problem:
  I uninstalled 2 '2 - compatible ACPI Microsoft control method battery' like many driver and restarted my computer.
  Problem solved. All back to normal.

  Thank you.

• Replacing the drive HARD, Microsoft doen't like the product key

  Hey all,.

  The other day that the HARD drive in the laptop from my friend bit the dust. Fortunately, he didn't just what he needed on this subject. Then he ordered an SSD 120 GB from newegg and gave it to replace (I'm apparently a personal technical support of my friend). Now I need to install a new copy of Windows 7 Home Premium 64-bit. So, I headed over to the Microsoft page for the download of Windows 7: http://www.microsoft.com/en-us/software-recovery

  But when I entered the product key from the bottom of the laptop code, he said that this keycode seems to have been pre-installed on a device, and I have to contact the manufacturer of the device (Dell, in this case).

  What should I do? I wish the Digital River downloads still existed. I could install and then enter the product key code. But, they do not exist, and I'm not ready to download win7 some fragmentary Torrent sites, because of the possible malware or adware or other.

  And if all else fails, I'm finally convinced that he should switch to Linux, which in my opinion is not yet comparable to Windows. And hey! It's free! No keycodes required 25-digit.

  The recovery of the software Page do not work with OEM product, complete keys keys and upgrade retail only.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
  Given that this option is no longer available, what are your options? See the article for more details:
  How to: What are my options for Windows 7 reinstall media?

• Add the drive to E520 (when Dell had transformed the RAID on with 1 mounted disk)

  Try to add a second SATA drive to my E520. Reason is that 1) many problems with the system and I tried to reload the OS (XP Pro) to Dell reinstallation DVD. Problem is that this disc and the drivers disk have not all drivers so ruined my system.

  Bought a new drive of 250 GB and equipped in first sata0 Bay, added a new disk plugged old drive into sata4. Built new operating system to a new disk, still no drivers so downloaded from another PC and have a BONE online and seems to work ok. Now trying to get the old disk on port 4 to work.

  Enabled in the BIOS, watch unknown player.

  Noticed the RAID setting, it was turned on even if only 1 disc installed initially. So went to stop and he warned that the BONE may be unusable and need to reinstall if I disabled RAID.

  Tried turning off RAID, disk on port 4 now accepted.

  Restarted and the system is unable to load (blue screen.

  Reset RAID on IT, removed old drive on Port 4 now works again, but it seems that I have to start all over again the installation. Rather frustrated that DEL has failed to correct records for resettlement, and they screwed up the BIOS settings. Why have RAID on when there is only 1 disc, crazy.

  Any ideas appreciated, but I am interested in the worst option and reload again. At least its only operating system.

  Thank you in anticipation

  Peter