WRT310N questions - router suddenly stopped working

Hello

I use my WRT310N since a few months now and have had some problems.  I have 1 PC connected via ethernet and 2 laptops connected via radio (1N and 1 G).  Except some random boring cuts here and there, it worked relatively smoothly.

I just upgraded my internet service and got a new modem (Motorola SB5102) and have all hung up in the same way as before--except that this time, the internet does not work.  The lights are all normal (blue for power, wireless and internet LED) and green for Ethernet 1.  However, internet does not-wired OR wireless.  I tried to use to diagnose/repair on my desktop with Windows Vista Ultimate 64 bit on my laptop with Windows Vista Home Premium 32 - bit... but it says that it cannot be fixed within windows and is a hardware problem.

I tried to reset the router, both by pressing the reset button in the 192.168.1.1 page.  I also tried plugging everything and try different cables.  I tried powercycling the modem and the router.  But still, no internet, despite the signal is broadcast and the LEDs showing all a - OK.

I seriously don't know what else to do.  Is there something wrong with my router, or I can fix it somehow?

Thanks for any help.

What is the physical address, you get the modem? Now hardwire modem-router-computer from office. Go to 192.168.1.1 > clone MAC address > enable > click on MAC to my PC Clone (make sure the MAC add is the same as the physical add modem.) Use the same computer that is connected to the modem) > click on save settings > access the status, make sure to add the IP address, gateway, DNS. If you get more valid, you must be online. If this isn't the case powercycle router and modem for 30 sec.

Tags: Linksys Routers

Similar Questions

  • The keyboard and mouse bluetooth suddenly stops working

    I asked this question before using Dell, but none of the answers provided.
    The keyboard and mouse bluetooth suddenly stops working.

    Given that this only happens when I'm online I make this question to the FireFox support.
    I have the latest version of FF:

    I installed the new BIOS and Shipset, but that does not change.

    Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

    R

    FredMcD said

    Keep a log of when this happens. What did you do when...

    Check the batteries.

    Hello

    Thanks for the help

    Just for information:

    I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

    Concerning

    R

  • Satellite L850 - webcam suddenly stopped working

    The web cam on my Satellite L850 has suddenly stopped working.

    It does not appear in Device Manager;
    I downloaded the latest driver on the Toshiba site;
    I checked the BIOS and the web cam is turned on;
    Always when I open the web cam application I get the following message:

    "webcam initialization failed Please restart request and camera control.

    I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

    Tired of going round in circles and getting nowhere.

    Any suggestions?

    Post edited by: mrclean

    Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

    I also recommend the suite of this workaround:
    Uninstall the webcam software
    Uninstall the VAP
    Uninstall all software needed the webcam (Skype, etc...)
    Now, restart and install CCLeaner (cleaning of freeware software)
    Reboot once more.
    Run CCleaner and clean the system and the registry.
    Reset
    Now follow with installation of VAP
    Reset
    Install the webcam software
    Reset
    Test webcam.

    Good luck

  • HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad suddenly stopped working

    Hello

    I have a HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 ultimate 32-bit for more than two years already. During these periods so far, whenever my laptop is idle for an hour or two, the keyboard and the touchpad suddenly stops working, without worrying if his operation on battery or AC.

    I always ensure that I have an external mouse in order for me to navigate correctly and pull up the screen keyboard to type when this issue arises.

    Everything seems to be updated regarding the Windows updates and I even reformatted, but issue persists.

    What point particular I feel a harware problem? Maybe a software problem? Or maybe a defective model?

    Your prompt response is much appreciated.

    Sincerely,

    Led

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    Looks like you are facing difficulties to solve problems with your laptop Touchpad

    We will surely help you with this

    Steps to drain the static charge and load the BIOS default settings to solve the problem

    Step 01. Turn off the laptop

    Step 02. Disconnect the power/AC adapter and also remove the battery too

    Step 03. Press and hold the power button of the laptop for a minute

    Step 04. Now re - insert the battery back in and plug again the power supply/adapter

    Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

    Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

    Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

    Step 08. Now, please wait until the unit load the Windows operating system

    Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

    Please click on this link to find several troubleshooting steps to solve this problem

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • my internet explores all of a sudden stops working then restarts, how can I fix

    I recntly been havig IE suddenly stops working then restarts itself.  My virus scans are clean and I have not downloaded anything new.  Any ideas?  I got 1blue screen with a view of crash dump.

    Hello

    Internet Explorer freezes or crashes
    http://support.Microsoft.com/GP/ie_freezes_or_crashes

    Tips for solving problems with Internet Explorer
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

    When you start Internet Explorer, it opens, flashes and then closes immediately
    http://support.Microsoft.com/kb/967896

    ------------------------------------------

    Several troubleshooting methods:

    What antivirus/antispyware/security products do you have on the machine? Be one you have
    EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
    may cause strange problems).

    If no joy there's something blocking perhaps.

    Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE or IE with no addons

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
    installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
    other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look
    right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
    ask about it here.

    Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
    unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    For Vista:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------------------

    For Windows 7:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    I hope this helps.

  • Why my Bluetooth Notebook Mouse 5000 suddenly stopped working

    I was with my mouse ended last night & my mouse was working properly, but during a transaction, it suddenly stopped working. The bluetooth at the bottom of my toolbar says bluetooth is activated & panel says that it works correctly. I tried new discovery mode, but I don't have the code requested. Please help if you can. I don't know too much about computers, so if you can put answers in terms I can understand, I would be happy.

    Hi MzMillie,

    Is this a microsoft product? When you are prompted for a key code (although it has not one) try entering 0000 by using your keyboard. For tips on solving this problem, please see the link below.

    http://support.Microsoft.com/kb/952818

    Let us know if this helped. If you have other questions about this, feel free to post on this thread. Thank you.

  • WRT54GS V7 suddenly stopped working

    I've had this router for about 1.5 years and it suddenly stopped working for both wireless and wired connections and wireless.  It is connected to the modem cable Rogers.  Because I can access the internet when I connect directly to it, there is no problem with the modem.

    I've updated the firmware, reset the router again and reconfigured using the web interface.

    I am told by Best Buy vendors there may be hardware or software problems, and I should get a new N router.

    Any suggestions on how to solve the problem or do I have to buy a new router.

    Thank you

    As it is your framework of Internet Service cable follow this link .

  • DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

    My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • detected external display suddenly stopped working - displays black screen

    original title: detected external display suddenly stopped working

    Hello

    I have searched in several forums, but have not been able to completely solve this problem.  It has been set provisionally and has not yet.
    This system I have:
    HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)
    AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHz
    ATI Radeon HD 3200 graphics card
    I have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only.  From one minute to the next two screen went black so I forced a restart and again the same problem.  I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display.  When I connected the VGA cable again the same question in the two screens were entirely black.  I unplugged once more the VGA cable if I could change the settings in Windows mobility.  I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only.  This solution lasted a day and now works in the main screen and the external screen is completely black.
    I tried in vain to solutions:
    -Change VGA cables continues to experience the same issue.
    -Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.
    -Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.
    -Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.
    -Checked AMD Vision Engine Control Center recognizes the connected external display.
    -Uninstalled the driver Dell ST2310 and re installed the driver.
    -On the screen settings have tried to extend the desktop on the external screen (second)
    Now, this is what's going on and don't know how to fix it:
    -Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.
    -When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.
    -Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.
    -When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.
    Help!

    Hello
     
    I also suggest you to update the BIOS. Visit the manufacturer for more information.
    http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
     
    WARNING:
    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
     
    See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
     
    Thank you

  • CD player is suddenly stop working

    my cd player is suddenly stop working and I found there is no driver cd/dvd ROM in my it's Manager device missing what to do? any help

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • device cd/DVD problem has suddenly stopped working?

    the dvd/cd device on my hp g62 has suddenly stopped working I tried to fix, but no swallows someone can help?

    Hello

    Check with HP Support, their online documentation and drivers, diagnostics,
    and ask questions in the forums about known problems.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ----------------------------------------------------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Satellite NB10T-to-10F - webcam suddenly stopped working

    Hello
    I got the laptop TOSHIBA SATELLITE NB10T-A-10F
    The web cam has suddenly stopped working
    I tried
    Updated bios even without result
    Here is the picture of Device Manager

    In various cases, the webcam can be enabled and disabled in the BIOS
    This option would typically appear in the BIOS under: Advanced-> System Configuration
    Please check this box.

    Otherwise, you need to know also that the webcam driver installation isn't necessary if you use the system Win 8 or 8.1 win because such driver is already part of the system.

    If the BIOS does not have the power option webcam (Advanced-> System Configuration) I would recommend you to retrieve the computer laptop back to the factory to check settings if possible hardware malfunction would be responsible for this issue.

  • Internal speakers Satellite C640 suddenly stopped working

    Hi friends,

    My satellite c640, internal speakers suddenly stopped working but works fine when the headphones or external sources are connected
    Is this a hardware problem?

    I m using win 7 64 bit and I tried to install the drivers but seems to be a hardware problem

    Thanks in advance

    Hello

    I don't know if it is a hardware issue of m.
    You may need to check certain settings.

    In Control Panel-> sound-> the Read tab.
    You should see the speakers selected as the default device.
    You can also click these speakers to the right and you should see a few options:
    Speaker Setup
    test
    Disable
    and so on.

    Test the speaker first. In my case, a short tone is displayed. You can also mark the speaker and click the properties button. You will see a second window with tabs. Check the second tab called LEVEL. Here, you can change the sound level.

    What happen exactly when you try to reinstall the sound driver? You get errors?

  • Satellite C650 - sound suddenly stopped working

    Hello.

    I bought this laptop the month last November.
    in any case, around a week or two ago, the noise suddenly would not work.

    He started making strange noises when I put in the headphones and speakers just made no noise at all never.
    I did a lot of weird things - like system restore, reinstall audio drivers but nothing worked until I updated the bios, then everything went well and the sound worked again.

    However, today, the sound suddenly stopped working again. I tried to re - install the current bios but InsydeFlash says: "the version of the ROM file is the same BIOS version" and just closes.

    I searched the internet for an older version of the bios, but when I try to install it, InsydeFlash said: 'the version of the ROM file is not newer than the version of the BIOS' and of course, I know that but then it closes too!

    I'm not really good at computers or anything, any help at all would be appreciated.

    Thank you.

    Hello

    I recommend checking some options first;
    -check if mute is not activated
    -check if all the volume controls are set to a higher value
    -check if the sound using headphones

    If this is not successful, you must reinstall the audio driver.
    First go to Device Manager and uninstall the audio driver. Restart the device
    Download the audio driver from the Toshiba page, then reinstall it. Reboot once again and test the sound.

  • Satellite Pro L870 - Touch-pad suddenly stopped working

    Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
    These things are not normally suddenly?

    Why device manager says that there is no problem when there is a very clear?

    Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

Maybe you are looking for