Add the new field in eDirectory: IOM

Similar Questions

• Add the new entry name of folder of bookmarks does not

  (There's a reason I'm fool the previous thread on this subject, as well as my response to this: I couldn't find a way to add FireFox 10.0.2 to the tags of the thread.) If the thread tags may be edited/added, I wouldn't highlight problems with FireFox 10.0.2 by launching this new thread.)
  RE add new bookmarks folder, can not enter the name of the new folder:

  I am now having this problem with FireFox 10.0.2, 11/03/2012

  When I click on add a folder, a new folder appears in the tree view and the folder name field is highlighted for the entry. But when I start to type characters in the field, I can only type 1 or 2 characters at the most seized stops accept input. I then go to the bookmarks menu, locate the new folder, right-click it, click Properties and complete the registration of the name of the folder.

  At worst, the folder name field will cease to accept entry as soon as I type the first tank, in which case the name of the folder will remain as "new folder." I find the new folder in the bookmarks menu to change the name, as described above.

  It is very annoying because it adds a number of additional steps just to add a new folder in the bookmarks menu. Add the new folder through the "Show all bookmarks" and navigate through the folder hierarchy are an alternative workaround, but that records all the steps.

  Any ideas or solutions?

  Hi John99,
  It has worked well in Mode without failure. Thanks for the suggestion!

  I'm going offline a bit to understand what add-on, plugin, etc., could be causing it. In the meantime, I have marked your suggestion to use Mode safe as useful so that anyone else coming here could get the clue.

  I should probably drop another line in the thread for the guy who in (or has been) using FireFox 7...

  I'll post my results if I can understand it.

  UPDATE:

  I went after any add-on which had nothing to do with bookmarks.

  It was the first add-on I tried, SortPlaces 1.9.1 that automatically sorts bookmarks in various ways according to the parameters. When I disabled it, the problem disappeared.

  I re-enabled it and checked the options to see if I could understand why she was stop to add the new folder. In the 'Options' tab, there is a time limit for how long interval SortPlaces will wait before you sort a bookmark changed or added. It was set to 3 seconds.

  It is not long enough for old men by typing the new name of folder. I put it in 10 seconds. Then, I created a new folder of bookmarks and start typing a name long nonsense, while I looked at the clock. After that 10 seconds it stopped accepting the entrance, right on the mark. What this hidden for me earlier, it was that when he stops to accept input, you don't see the new folder to place in the position of sorting on the menu add a folder. You will see that if you expand the folder later. It's probably why I didn't connect the two.

  Anyway, problem solved. I'm leaving the delay to 10 seconds. If I ever need to be longer, I'll just increase it.

  Thanks again for the suggestion of Mode safe and enjoy the next season of mud.

  Alan Mintaka

• Cannot add the new nfs datastore

  Hello

  I would like to get some advice how to add a new nfs data store. Here are the steps I did:

  (1) I have setup a stand-alone ESXi 4 server. I configured the VMNIC0 with 192.168.100.1/24 IP with Vswitch0.

  (2) I have setup a NFS storage. The NFS share is file://\\192.168.200.2\share. I tried using a Windows laptop and I can access the share.

  (3) ON the ESXi server, I created another Vswitch1 with VMNIC1 IP 192.168.200.1/24. I connect my storage to VMNIC1. ESXi, I'm able to ping my storage 192.168.200.2.

  (4) I connect my Windows laptop (IP 192.168.100.2) to VMNIC0. I am able to Vsphere Client to the ESXi server.

  (5) using the Vsphere Client user interface, I click on 'add the new data store '. The fields that I get are "192.168.200.2" and "share". I got the below error message:

  "Error while configuring the host: NFS error: unable to mount filesystem: unable to connect to the NFS server.

  What it went wrong?

  Kind regards

  Kent

  No claim, the NFS must be in the same subnet as your ESX VMKernel Port and your VI Client must be in the same subnet as the Console of the ESX Service / Management Port. But in many cases (especially with ESXi and if not configured otherwise) management and VMKernel are on the same Interface / subnet.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Co-author of the German reference work on virtualization and VMware

  "Das Virtualisierungsbuch" - http://www.cul.de/virtual2.html

  Regular author on virtualization and other topics in the Magazine German FreeX IT in ass

  http://www.cul.de/freeX.html

• How to add the new column in the tabular layout editor in Oracle Forms

  Hello
  
  I need to add the new column to a datablock and display the newly added column in the form. What are the steps I need to follow.
  
  1. I chose the new column from the view to the datablock.
  2. Add the text element in the layout editor. But this position is not correct. It overlaps with another column. How to add the new column to the layout editor?
  
  Thank you
  HC

  In the layout editor, you can simply drag the fields so that they do not overlap.
  See http://www.youtube.com/watch?v=7emNa7THMLg

  Sandeep Gandhi

• Add the new contact

  Hi, I have a problem with a part of my integration - adding a new contact. I do all kinds of things with integration objects, including the update of the Contact object and will have no problem. Specifically, it adds the new contact, but it times out:
  
  HttpException (0x80004005): request timed out.
  
  This sometimes happens, sometimes it doesn't, but it always takes a lot of time to InsertOrUpdate compared to adding/getting contact to date of other objects. (What is normal behavior?) I went through the code and everything seems fine. I just vomit this here to see if someone had a problem of simliar or off-the-top-of-the-head suggestions.
  
  It's been a while since I've been here and I've not been keeping up with the goings. Probably there was at least a new version since I checked last and I see now that they are at the Service of Web 2.0.
  
  This is a c# project and I use Web Service 1.0. I use forms authentication and I set a timeout to 20 minutes. It is based on the c# WebSelfService example I received from customer of 18 months previously.
  
  In addition, please do not assume that I am smarter than I really am. Do not think that "well, surely he has verified that if I post." Just after some thoughts come to your head.
  
  Thank you.
  
  Published by: user10974562 on April 3, 2009 06:18
  
  Published by: user10974562 on April 3, 2009 06:21

  Just a question... Reg your insert.

  How are you populating the Manager field in your insert?

• Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

  I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.

• How to add the 'new tab' button next to the last tab?... I use version 9.0.1. and they are missing and I can't find how to add.

  I got the new tab next to open tabs button, but with a recent update of Firefox, the tab button disappeared. Went through all the help points, but how do I add the new Help tab is not listed. The only way to open a new tab is manually using the buttons on windows/t or opening the file and choosing the new tab.

  Hello

  It could be that he is hidden behind another icon. Please try this: right click on the empty space after the last tab and Customize.... With the mini window open, you can move the other toolbars and icons to check if the new tab button is hidden. You can also check inside the mini window customize the icon named new tab or click Restore Default Set that will be hopefully restore back. Please note that if nothing is uninstalled or disabled when you click on restore by default, you will have to redo all changes to manual/personal toolbar.

  Customize toolbars

• What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:

  Windows 7 installation, Setup, and Deployment Forum

• How to add the new column in existing table to our desired location?

  How to add the new column in existing table to our desired location?

  For example, I have to add the new column 'course' before the salary column in the emp table.

  I think the best way is to add the column at the end of the table and create a new view with the order of the columns...

  Another option...

  places the data into a temporary table and recreate the table with the correct order of the columns, and then insert data to the table from the temporary table

  Refer

  Add column (from table) in the desired position

  Example:

  CREATE TABLE temp_my_user LIKE)

  SELECT * FROM password);

  DROP TABLE password;

  (Password) CREATE TABLE

  userID NUMBER

  , first name VARCAHR2 (25)

  , middleInitial VARCHAR2 (1)

  (, name VARCHAR2 (25));

  INSERT INTO password (userID, firstName, lastName)

  (SELECT username

  first name

  lastName

  OF temp_my_user);

  DROP TABLE temp_user;

• Add the new payment group

  Dear,

  Could someone explain in details the steps to create the new group of payment like cash on delivery?

  Please don't tell me to refer to the documentation because I did not understand what

  http://docs.Oracle.com/CD/E26180_01/platform.94/ATGCommProgGuide/HTML/s1008extendingthepaymentprocesstosupp01.html

  the implementation is not clear

  Any help is appreciated... Thanks in advnace

  Create a payment CashOnDeliveryPaymentGroup extension of PaymentGroupImpl with its group properties

  create the interface and implementation classes - CashOnDeliveryProcessor with the following methods

  Public CashOnDeliveryStatus permits (CashOnDeliveryInfo, cashOnDeliveryInfo, CashOnDeliveryPaymentGroup cashonDeliveryGroup);

  public CashOnDeliveryStatus flow (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);

  public credit of CashOnDeliveryStatus (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);

  Create CashOnDeliveryProcessorImpl application CashOnDeliveryProcessor processor pipeline

  Create CashOnDeliveryStatus PaymentStatusImpl extension

  create ProcProcessCashOnDelivery payment processor that extends ProcProcessPaymentGroup and replace authorizePaymentGroup, creditPaymentGroup and debitPaymentGroup methods to return the CashOnDeliveryStatus object

  Create a bean object of CashOnDeliveryInfo containing all the data required by the methods of CashOnDeliveryProcessorImpl

  Create ProcCreateCashOnDelivery pipeline processor, which should create CashOnDeliveryInfo and add it to the object PaymentManagerPipelineArgsDictionary

  Add the pipelinechain in paymentpipeline.xml for an example

  Add the new entry in PaymentManager.paymentGroupToChainNameMap

  & paymentGroupToChainNameMap =.

  xyz.payment.CashOnDeliveryPaymentGroup = cashOnDeliveryProcessorChain

  Add the new class to the paymentTypeClassMap and add the new class of real estate beanNameToItemDescriptorMap to OrderTools and

  & paymentTypeClassMap =.

  cashOnDelivery = xyz.payment.CashOnDeliveryPaymentGroup

  & beanNameToItemDescriptorMap =.

  xyz.payment.CashOnDeliveryPaymentGroup=cashOnDelivery,\

  xyz.payment.CashOnDeliveryStatus = cashOnDeliveryStatus

  In OrderRepository.xml

  Add to the point-descriptor paymentGroup

  create descriptor of the item with the properties and create the db as a result table

  Regardless of the required properties

  Regardless of the required properties

  It could be useful, Wow I spent 20 minutes on this

• Add the new storage provider

  Hello

  I try to add the new provider (HP P2000 G3 MSA FC) storage for VMware vSphere Web Client 6, then these steps vSphere 6.0 Documentation Center

  What is the "URL" or where I can find it? I used http://192.168.190.30/ which is the web storage console IP, but get error "the specified provider URL is not valid.

  TIA

  Hello

  VASA Provider URL is accessible via HP OneView plugin for VMware vCenter...

  See details in the section "Support of VASA" on page 37 of this white paper from HP to address official:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/4AA1-0290ENW.PDF?ver=8.0

• Add the new SCSI controller and new drive - powershell SDK

  Hi all

  I'm trying to add the new disc of paravirtual to my VMs. There are two types of virtual machines in the environment; a Paravirtual controller attached and others are without controller; so my task is to set the new drive of paravitual using powershell SDK.

  So far I am successful with my code if the controller is already present but the script fails when I try to attach the controller. with the error.

  RecommendDatastores: The method call failed because [System.Object []] contains a method named "RecommendDatastores".

  C:\NodeDeployment\Inprogress\Add_newPVScsiDisk.ps1:111 tank: 44

  + $generatedkey = $SRM. RecommendDatastores < < < < ($storageSpec)

  + CategoryInfo: InvalidOperation: (RecommendDatastores:String)], RuntimeException

  + FullyQualifiedErrorId: MethodNotFound

  
  

  I know that this script is not good enough to post here because it is an initial draft, but in the script attached please help me with the present part-

  The Script requires a csv with VMname entry; Disksize to be attached and store cluster data

  else {
              Write-Host "Paravirtualized SCSI Controller Not Found in $vmname.. Trying to add new scsi controller and additional Hard-disk..."
              $NewSCSIDevice = New-Object VMware.Vim.VirtualDeviceConfigSpec
              $NewSCSIDevice.operation = "add"
              $NewSCSIDevice.device = New-Object VMware.Vim.ParaVirtualSCSIController
              $NewSCSIDevice.device.key = -222
              $NewSCSIDevice.device.busNumber = ($allScSiController.BusNumber.Count)
              $NewSCSIDevice.device.sharedBus = "noSharing"
              $NewDiskDevice.device.controllerKey = -222
              $NewDiskDevice.device.unitNumber = 0
              $NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024))
              $storageSpec.configSpec.deviceChange += $NewDiskDevice
              $storageSpec.configSpec.deviceChange += $NewSCSIDevice
              $generatedkey = $SRM.RecommendDatastores($storageSpec)
              $key = $generatedkey.Recommendations[0].Key
              $SRM.ApplyStorageDrsRecommendation_Task($key)
  }
  
  

  OK I have it myself; I guess busnumber was the problem. He converted to INT working like charm...

  Now, I have to work with storage Drs IE. with the ReconfigureVM_task method. hoping that will work also...

  else {}

  [int] $busnumber = $allScSiController.Count

  Write-Host "paravirtualized SCSI Controller not found in $vmname... Try to add the new controller scsi and extra hard drives... »

  $NewSCSIDevice = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $NewSCSIDevice.operation = 'Add '.

  $NewSCSIDevice.device = new-Object VMware.Vim.ParaVirtualSCSIController

  $NewSCSIDevice.device.key = - 222

  $NewSCSIDevice.device.busNumber = $busnumber

  $NewSCSIDevice.device.sharedBus = "noSharing".

  $NewDiskDevice.device.controllerKey = - 222

  $NewDiskDevice.device.unitNumber = 0

  $NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024))

  $storageSpec.configSpec.deviceChange += $NewDiskDevice

  $storageSpec.configSpec.deviceChange += $NewSCSIDevice

  $generatedkey = $SRM. RecommendDatastores ($storageSpec)

  $key = $generatedkey. Recommendations [0]. Key

  $SRM. ApplyStorageDrsRecommendation_Task ($key)

  }

  ---

  Concerning
  Sanshis

• Cannot add the new data store

  VM dear supporters,

  My vSphere environment: 1 vCenter Server Foundation, 3 vSphere 4.0 Enterprise 5.0 and vSphere Client 5.0

  1. read the error message in the attachment:

  "hostdatastoresystem.queryvmfsdatastorecreateoptions...". »

  2. already the ESX02 reboot but still unable to add the new data store.

  New size of the data store = 3.1 TB

  Need to vmsupport on this subject.

  Thank you

  Hello

  Size Max LUN VMFS is 2 TB-512 MB in vSphere 4 (your hosts are in version 4), if you want to add 3.1 TB LUN first upgrade ESX hosts to version 5

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• cannot add the new hard drive more than 2 TB on vsphere upgrade 5

  can someone give me a clue? I can't add new greater than 2 TB drive to my vm on my upgraded vsphere 5.0. My data store is 6 TB and already read by vsphere... I create new virtual machine and add the new drive, but it limits again just 2 TB when I change 4 TB, the error message will appear. I recently added my datastore LUN with VMFS5 version. is there a any mistake I made? Please help me this problem is so frustrating me... i need to create new disk 6 TB to my new file server

  Hello.

  You will need to use a RDM in physical Compatibility Mode to achieve. As weinstein5 said, a VMDK cannot be greater than 2-to-512bytes. You can use the OS to spread over several 2 TB-512bytes VMDK, if that's what you really want.

  Good luck!

• Add the new hard drive into the data store in ESXi 4.1

  Hi all

  I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.

  I added a new 500 GB scsi hard drive to the server,

  and I need to add it to the datasore or create a new...

  How can I see this new hard drive? and add it to the data store?

  Waiting for your help.

  concerning

  Abrams

  Oracle system engineer

  Abrams,

  That's all I can help you.  These instructions are based on the Perc 5 / i controller, which I think you have on our system.  You have not specified the server so I just assumed that this is so.

  1. unscrew the hot spare that you just made.  Follow this link from Dell.
  http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1061343

  2 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357

  This link has three steps to void, skip the step on "spare parts of designate hot."
  a. create the virtual disks and select virtual disk options.   -Online steps to create another disk group and add the new disk to the disk group.
  (b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
  c. initialize virtual disks. -online must do.  just do not initialize the incorrect disk.

  After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).

  And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.

  Good luck.