Add the new port group to dSwitch
Hello
Given that I have never done this and this prod, as I decided to ask first ;-)
In ESXi 4.1 using a dSwitch, if I add a NEW port group using a VLAN that is not in use (on this dSwitch), that will force any failure to migrate it virtual machines on this dSwitch?
Adding this new group of port causes the dSwitch "reset" in a manner that will cause the failure?
You should be able to add, modify and/or delete groups of ports without affecting other groups/VMs port connected to other port groups. Just follow the steps in http://kb.vmware.com/kb/1010593
André
Tags: VMware
Similar Questions
-
Dear,
Could someone explain in details the steps to create the new group of payment like cash on delivery?
Please don't tell me to refer to the documentation because I did not understand what
the implementation is not clear
Any help is appreciated... Thanks in advnace
Create a payment CashOnDeliveryPaymentGroup extension of PaymentGroupImpl with its group properties
create the interface and implementation classes - CashOnDeliveryProcessor with the following methods
Public CashOnDeliveryStatus permits (CashOnDeliveryInfo, cashOnDeliveryInfo, CashOnDeliveryPaymentGroup cashonDeliveryGroup);
public CashOnDeliveryStatus flow (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);
public credit of CashOnDeliveryStatus (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);
Create CashOnDeliveryProcessorImpl application CashOnDeliveryProcessor processor pipeline
Create CashOnDeliveryStatus PaymentStatusImpl extension
create ProcProcessCashOnDelivery payment processor that extends ProcProcessPaymentGroup and replace authorizePaymentGroup, creditPaymentGroup and debitPaymentGroup methods to return the CashOnDeliveryStatus object
Create a bean object of CashOnDeliveryInfo containing all the data required by the methods of CashOnDeliveryProcessorImpl
Create ProcCreateCashOnDelivery pipeline processor, which should create CashOnDeliveryInfo and add it to the object PaymentManagerPipelineArgsDictionary
Add the pipelinechain in paymentpipeline.xml for an example
Add the new entry in PaymentManager.paymentGroupToChainNameMap
& paymentGroupToChainNameMap =.
xyz.payment.CashOnDeliveryPaymentGroup = cashOnDeliveryProcessorChain
Add the new class to the paymentTypeClassMap and add the new class of real estate beanNameToItemDescriptorMap to OrderTools and
& paymentTypeClassMap =.
cashOnDelivery = xyz.payment.CashOnDeliveryPaymentGroup
& beanNameToItemDescriptorMap =.
xyz.payment.CashOnDeliveryPaymentGroup=cashOnDelivery,\
xyz.payment.CashOnDeliveryStatus = cashOnDeliveryStatus
In OrderRepository.xml
Add to the point-descriptor paymentGroup
create descriptor of the item with the properties and create the db as a result table
Regardless of the required properties
Regardless of the required properties
It could be useful, Wow I spent 20 minutes on this
-
Windows Mail: How to add the new contact group
In Windows Mail my toolbar has no "New Contact Group" to click. How can I create a new contact group, please?
In Windows Mail my toolbar has no "New Contact Group" to click. How can I create a new contact group, please?
RE: New group contact button missingOpen Windows Mail > click Contacts > on this Contacts window, right-click on an open space inside the window > click Customize this folder > under what kind of folder do you want? Click the pointer on the far right (there is only a single pointer here), click Contacts > OKNow look, you will see new Contact button group.
t-4-2
-
Add the new disk group to the existing group
Hello world
I have a Dell T310 server with a PERC 6 controller. My current setup is:
Disk 0-1 TB
1-1 TB drive
Players above are mirrored and partitioned the drive C and D.
The first problem I have is the drive C: is 40GB (from the factory) and is running out of disk space.
I bought 2 2 TB drives and was hoping to install readers, their mirror and more 1 TB disks and use the disks of 2 TB as the new D: - I would image current data on D for new readers.
I have installed 2 new readers (2.0 TB), but when I go into the settings of the raid controller I am only able to assign spare readers?
Can someone please let me know what I am doing wrong?
I already have a full backup of the server.
Thank you.
CSFD
Start CTRL-R, VD MGMT, highlight the controller in the left upper corner, F2, Create/New. (Don't forget to select advanced options and Initialize boxes.)
-
Assign the new port group guests
Hi all
I am trying to use a work autour for non persistent pools, due to the dependence on an application IP static. Is there a way to re - assign a group of ports to a guest VM?
Thank you in advance!
Tim
Try thisd
Get-VM
| Get-NetworkAdapter | Set-NetworkAdapter -NetworkName -Confirm:$false If you have more than 1 NETWORK card connected to the prompt, you can use a where clause clause to select the correct NETWORK adapter
Get-VM
| Get-NetworkAdapter | where{$_.Name -eq "Network adapter 2"} | ` Set-NetworkAdapter -NetworkName -Confirm:$false ____________
Blog: LucD notes
Twitter: lucd22
-
Mr President.
How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?
as below
Concerning
Hello world
for an overview in the following form
This is the sql query that reach this format
SELECT c.name customer_name, p.name product_name, sl.sal_qty, sl.unit_sal_price, sl.sal_qty*sl.unit_sal_price AS salesvalue, CASE WHEN ROW_NUMBER () OVER (partition by c.cust_id order by p.prod_id desc,sl.sal_id desc) = 1 THEN SUM (sl.sal_qty*sl.unit_sal_price) OVER (PARTITION BY c.cust_id) END totals FROM customer c INNER JOIN sales s ON s.cust_id = c.cust_id INNER JOIN salesline sl ON sl.sal_id = s.sal_id INNER JOIN product p ON p.prod_id = sl.prod_id ORDER BY c.cust_id,p.prod_id,sl.sal_id
Cheers and enjoy
Respect of
-
Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012
I am my output of an old Windows box to a new server migration and have problems with the new ports. I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port
When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.
My test was then on the 6th and last instance and went well.
When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.
If I have one of these printers connected to the 6th port, it worked fine.
I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."
I tried to add the port via the registry - he added, but would not yet print.
Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"
I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees
I modified the local security policy to enable users to add printer drivers.
And I have now run out of ideas! Someone at - it a?
Thank you
This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).
So it's fixed
-
Put virtual machines inside the VMkernel port group
Hello
Network for administrators of VMware SIAS layout:
"You can not put VMs within that group of port because it is made especially for a VMkernel port."
However, I use ESXi 5.5 and is able to put normal interface of VM inside the vmk port group. (I only created 1 vmk port group so all virtual machines in the same group with the vmkernel interface)
May I know if this is a new feature, or something is wrong?
Thank you!
This may be possible with distributed switches not with standard switches.
-
Add the new hard drive into the data store in ESXi 4.1
Hi all
I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.
I added a new 500 GB scsi hard drive to the server,
and I need to add it to the datasore or create a new...
How can I see this new hard drive? and add it to the data store?
Waiting for your help.
concerning
Abrams
Oracle system engineer
Abrams,
That's all I can help you. These instructions are based on the Perc 5 / i controller, which I think you have on our system. You have not specified the server so I just assumed that this is so.
1. unscrew the hot spare that you just made. Follow this link from Dell.
http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp10613432 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357
This link has three steps to void, skip the step on "spare parts of designate hot."
a. create the virtual disks and select virtual disk options. -Online steps to create another disk group and add the new disk to the disk group.
(b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
c. initialize virtual disks. -online must do. just do not initialize the incorrect disk.After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).
And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.
Good luck.
-
Cannot add the new nfs datastore
Hello
I would like to get some advice how to add a new nfs data store. Here are the steps I did:
(1) I have setup a stand-alone ESXi 4 server. I configured the VMNIC0 with 192.168.100.1/24 IP with Vswitch0.
(2) I have setup a NFS storage. The NFS share is file://\\192.168.200.2\share. I tried using a Windows laptop and I can access the share.
(3) ON the ESXi server, I created another Vswitch1 with VMNIC1 IP 192.168.200.1/24. I connect my storage to VMNIC1. ESXi, I'm able to ping my storage 192.168.200.2.
(4) I connect my Windows laptop (IP 192.168.100.2) to VMNIC0. I am able to Vsphere Client to the ESXi server.
(5) using the Vsphere Client user interface, I click on 'add the new data store '. The fields that I get are "192.168.200.2" and "share". I got the below error message:
"Error while configuring the host: NFS error: unable to mount filesystem: unable to connect to the NFS server.
What it went wrong?
Kind regards
Kent
No claim, the NFS must be in the same subnet as your ESX VMKernel Port and your VI Client must be in the same subnet as the Console of the ESX Service / Management Port. But in many cases (especially with ESXi and if not configured otherwise) management and VMKernel are on the same Interface / subnet.
Kind regards
Gerrit Lehr
If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.
Co-author of the German reference work on virtualization and VMware
"Das Virtualisierungsbuch" - http://www.cul.de/virtual2.html
Regular author on virtualization and other topics in the Magazine German FreeX IT in ass
-
Cannot add the new log file for the 11g database.
Salvation of DBA
I'm not able to add the log file, I receive the error message when the database is added.
SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
*
ERROR on line 1:
ORA-01505: Error adding log files
ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
already a part of the database
SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
GROUP # MEMBER STATUS
---------- ---------------------------------------- ----------
1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
/Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
/Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
Kindly help me to add the new log file to my database.
Thank you
SGPGO
Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).
Thank you
Hussein -
Add the new entry name of folder of bookmarks does not
(There's a reason I'm fool the previous thread on this subject, as well as my response to this: I couldn't find a way to add FireFox 10.0.2 to the tags of the thread.) If the thread tags may be edited/added, I wouldn't highlight problems with FireFox 10.0.2 by launching this new thread.)
RE add new bookmarks folder, can not enter the name of the new folder:I am now having this problem with FireFox 10.0.2, 11/03/2012
When I click on add a folder, a new folder appears in the tree view and the folder name field is highlighted for the entry. But when I start to type characters in the field, I can only type 1 or 2 characters at the most seized stops accept input. I then go to the bookmarks menu, locate the new folder, right-click it, click Properties and complete the registration of the name of the folder.
At worst, the folder name field will cease to accept entry as soon as I type the first tank, in which case the name of the folder will remain as "new folder." I find the new folder in the bookmarks menu to change the name, as described above.
It is very annoying because it adds a number of additional steps just to add a new folder in the bookmarks menu. Add the new folder through the "Show all bookmarks" and navigate through the folder hierarchy are an alternative workaround, but that records all the steps.
Any ideas or solutions?
Hi John99,
It has worked well in Mode without failure. Thanks for the suggestion!I'm going offline a bit to understand what add-on, plugin, etc., could be causing it. In the meantime, I have marked your suggestion to use Mode safe as useful so that anyone else coming here could get the clue.
I should probably drop another line in the thread for the guy who in (or has been) using FireFox 7...
I'll post my results if I can understand it.
UPDATE:
I went after any add-on which had nothing to do with bookmarks.
It was the first add-on I tried, SortPlaces 1.9.1 that automatically sorts bookmarks in various ways according to the parameters. When I disabled it, the problem disappeared.
I re-enabled it and checked the options to see if I could understand why she was stop to add the new folder. In the 'Options' tab, there is a time limit for how long interval SortPlaces will wait before you sort a bookmark changed or added. It was set to 3 seconds.
It is not long enough for old men by typing the new name of folder. I put it in 10 seconds. Then, I created a new folder of bookmarks and start typing a name long nonsense, while I looked at the clock. After that 10 seconds it stopped accepting the entrance, right on the mark. What this hidden for me earlier, it was that when he stops to accept input, you don't see the new folder to place in the position of sorting on the menu add a folder. You will see that if you expand the folder later. It's probably why I didn't connect the two.
Anyway, problem solved. I'm leaving the delay to 10 seconds. If I ever need to be longer, I'll just increase it.
Thanks again for the suggestion of Mode safe and enjoy the next season of mud.
Alan Mintaka
-
I got the new tab next to open tabs button, but with a recent update of Firefox, the tab button disappeared. Went through all the help points, but how do I add the new Help tab is not listed. The only way to open a new tab is manually using the buttons on windows/t or opening the file and choosing the new tab.
Hello
It could be that he is hidden behind another icon. Please try this: right click on the empty space after the last tab and Customize.... With the mini window open, you can move the other toolbars and icons to check if the new tab button is hidden. You can also check inside the mini window customize the icon named new tab or click Restore Default Set that will be hopefully restore back. Please note that if nothing is uninstalled or disabled when you click on restore by default, you will have to redo all changes to manual/personal toolbar.
-
Satellite A100-192: is it possible to add the DVI port
Hello
is it possible to add the dvi port to this laptop?
ati mobility radeon x 1600 graphics card is the chipset
supports the dvi and analog component outputis it possible to add the dvi port
or component signal output on the d - sub port?TIA
Hello
There is unfortunately no way to add a DVI port to this machine. The problem is there is no adapter for D - sub to dvi and you can't go to the motherboard of your machine with a DVI connector.
Boyfriend sorry but it is a fact...
Welcome them
-
What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image
Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:
Maybe you are looking for
-
blur - up for Windows xp Office
Hello;Wish you all Happy New Year! I hope someone could help me solve this problem.I have an old laptop of 510 m Dell Inspiron that has windows xp sp2 on it. Some time ago I thought that I would like to clean the laptop to speed it up. I cleaned ever
-
How can I get rid of security tool?
-
Help me with the "Turn Off screen" app
Hello world! I start developing BB10, I want to make a request, there can turn off the screen with 1 button icon on the screen. How can I do? where should I start from?
-
My new Bb 8330 Says JUM error 513 blackBerry smartphones help me
Help, please... This is my first bb and im new on this, I don't know what is happening, I tried to download something for my bb 8330 for the Desktop Manager and it asks me the password and I entered the wrong password and now my screen went all white
-
Canon imageCLASS MF3240 all-in - One Printer
I tried to download all the drivers various software driver proposed to update the computer and those that have been suggested on this site, but none of them seems to work. I don't know what to do at this point. Thank you!