Assign the new port group guests

Similar Questions

• Add the new port group to dSwitch

  Hello

  Given that I have never done this and this prod, as I decided to ask first ;-)

  In ESXi 4.1 using a dSwitch, if I add a NEW port group using a VLAN that is not in use (on this dSwitch), that will force any failure to migrate it virtual machines on this dSwitch?

  Adding this new group of port causes the dSwitch "reset" in a manner that will cause the failure?

  You should be able to add, modify and/or delete groups of ports without affecting other groups/VMs port connected to other port groups. Just follow the steps in http://kb.vmware.com/kb/1010593

  André

• Put virtual machines inside the VMkernel port group

  Hello

  Network for administrators of VMware SIAS layout:

  "You can not put VMs within that group of port because it is made especially for a VMkernel port."

  However, I use ESXi 5.5 and is able to put normal interface of VM inside the vmk port group. (I only created 1 vmk port group so all virtual machines in the same group with the vmkernel interface)

  May I know if this is a new feature, or something is wrong?

  Thank you!

  This may be possible with distributed switches not with standard switches.

• Unit - mailbox moved to the new storage group is not available

  Hello

  I have a 4.0 (4) unit UM with a message from Exchange 2003 offbox store. During the initial installation, only the first storage group on the mail server was present and mailboxes of the users are hosted here.

  Recently, a new storage group was created on the mail server and a mailbox has been moved from the first group of storage to the new storage group. The Subscriber is able to receive voice messages via e-mail, however his MWI does not illuminate. When it tries to connect to retrieve messages on his phone, the unit said "your messages are not available now.

  I am able to create or import users that are hosted in the new storage group, but I'm having the same symptoms. Is it necessary to rerun the configuration of message store wizard?

  Thanks in advance.

  Have you run Assistant permission for the new Bank of mailboxes?

  The other thing to do is to restart the AvMsgStoreMonitor service; But wait after hours. A reboot will do the same.

• How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  Mr President.

  How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  as below

  

  Concerning

  Hello world

  for an overview in the following form

  

  This is the sql query that reach this format

  SELECT c.name customer_name,
          p.name product_name,
          sl.sal_qty,
          sl.unit_sal_price,
          sl.sal_qty*sl.unit_sal_price AS salesvalue,
          CASE
            WHEN ROW_NUMBER () OVER (partition by c.cust_id order by p.prod_id desc,sl.sal_id desc) = 1 THEN
                SUM (sl.sal_qty*sl.unit_sal_price) OVER (PARTITION BY c.cust_id)
          END totals
  FROM customer c INNER JOIN sales s ON s.cust_id = c.cust_id
  INNER JOIN salesline sl ON sl.sal_id = s.sal_id
  INNER JOIN product p ON p.prod_id = sl.prod_id
  ORDER BY c.cust_id,p.prod_id,sl.sal_id
  

  Cheers and enjoy

  Respect of

• How to assign the ID of group for each group in the SQL query.

  Hi all

  I want to assign the ID of group for each group (group ID of series). I tried with the row_number function but did not work for my requiredment. Here is my sample data and my requirement.

  Col1

  A

  A

  A

  A

  A

  B

  C

  D

  D

  D

  D

  E

  E

  E

  F

  G

  G

  G

  I want to get number of each column with ID group assign to it value. Here is my example output

  Col1	County	Group ID
  A	5	1
  A	5	1
  A	5	1
  A	5	1
  A	5	1
  B	1	2
  C	1	3
  D	4	4
  D	4	4
  D	4	4
  D	4	4
  E	3	5
  E	3	5
  E	3	5
  F	1	6
  G	3	7
  G	3	7
  G	3	7

  Select col1, count (1) NTC (col1 partition).

  ROW_NUMBER() over (partition by col1 by col1 order) tbl_test grp_id.

  Please help me solve this problem.

  SELECT

  COL1,

  COUNT (*) ON MYCOUNT (COL1 PARTITION).

  DENSE_RANK () OVER (ORDER BY COL1) GROUPID

  Of

  T1;

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena

• Port group of VM moving with existing VM to vSwitch0 to a new vSwitch1 with the new port VM group

  Hello

  My vSphere 4 host has been configured from the settings default after having only a single vSwitch (vSwitch0) and eventually populated by 2 VMs now.

  I'm now changes to the configuration of the network of vCenter and adding a new vSwitch (vSwitch1) with a new group of computer Virtual Port.

  How can I safely move my 2 existing VMs to vSwitch0 to the new VM Port Group in vSwitch1?

  Thank you.

  Just go to the virtual machines 'change settings', click on your card and the network (by choosing the new label of network). This will move the virtual machine safely.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Chief Executive Officer of the Linux server

• Add the default gateway for the VMKernel port group

  Hello

  I use this script to create a VMkernel port group, but the last part of the gateway address of updates to script for all groups of VMKernel ports. How can I change the script so it adds the passage for the 55-CHI-VMKernel port group only. Thank you.

  $hostname6 = "host1".
  $pg = New-VirtualPortGroup-55-CHI-VMKernel - VirtualSwitch "vSwitch1' name - VLanId 55

  New-VMHostNetworkAdapter - VMHost $hostname6 - $pg PortGroup - VirtualSwitch "vSwitch1' - '10.33.1.77' IP - subnet"255.255.255.0"- ManagementTrafficEnabled $true mask

  IP address of the gateway #Add
  $netMgr = get-View (Get-VMHost $hostname6 |) Get - View).ConfigManager.NetworkSystem
  $iproute = new-Object VMware.Vim.HostIpRouteConfig
  $iproute.defaultGateway = "10.33.1.3".
  $netMgr.UpdateIpRouteConfig ($iproute)

  Have you tried it like that?

  $hostname6 = 'host1' $pg = New-VirtualPortGroup -Name 55 - CHI-VMKernel -VirtualSwitch "vSwitch1" -VLanId 55
  New-VMHostNetworkAdapter -VMHost $hostname6 -PortGroup $pg -VirtualSwitch "vSwitch1" -IP "10.33.1.77" -SubnetMask "255.255.255.0" -ManagementTrafficEnabled $true
  #Add gateway IP address
  $netMgr = Get-View (Get-VMHost $hostname6 | Get-View).ConfigManager.NetworkSystem $iproute = New-Object VMware.Vim.HostIpRouteConfig $iproute.defaultGateway = "10.33.1.3"$iproute.GatewayDevice = "vmk0"$netMgr.UpdateIpRouteConfig($iproute)
  

• Create the new contact group in Windows Mail

  In Windows Mail > Windows Contacts > new Contact Group option is missing from the toolbar.

  That's happened?

  Spirit - has ever found the fix here: http://www.vista4beginners.com/Missing-buttons-from-Windows-Contacts-toolbar

• Windows Mail: How to add the new contact group

  In Windows Mail my toolbar has no "New Contact Group" to click.  How can I create a new contact group, please?

  In Windows Mail my toolbar has no "New Contact Group" to click.  How can I create a new contact group, please?

  RE: New group contact button missing
   
  Open Windows Mail > click Contacts > on this Contacts window, right-click on an open space inside the window > click Customize this folder > under what kind of folder do you want? Click the pointer on the far right (there is only a single pointer here), click Contacts > OK

  Now look, you will see new Contact button group.

  t-4-2

• Get-nicteaming of the distributed port group.

  Hello.

  I try to get nic teaming policy of dv port groups, but had issues with pipes (5.5, 5.5 dvswitch vsphere, powercli 5.5.0.6632):

  PS C:\Windows\system32 > $dv = Get-VirtualSwitch-distributed

  PS C:\Windows\system32 > $dv

  Name NumPorts Mtu notes

  ----                           --------   ---   -----

  1170 1500 dvSwitch

  PS C:\Windows\system32 > $pgs = Get-VirtualPortGroup - VirtualSwitch $dv

  PS C:\Windows\system32 > $pgs

  Name key VLanId PortBinding NumPorts

  ----                      ---                            ------ ----------- --------

  dvSwitch-DVUplinks-44 dvportgroup-45 18 static

  Management dvportgroup-46 128 static network

  INET_UITIS_ephemeral dvportgroup-845 ephemeral 0

  KSPD_ephemeral dvportgroup-846 ephemeral 0

  GZ_Interconnect_ephemeral dvportgroup-843 0 ephemeral

  INET_GUEI_ephemeral dvportgroup-844 ephemeral 0

  VeeamISCSI_ephemeral dvportgroup-849 0 ephemeral

  VeeamISCSI dvportgroup-92 128 static

  Management_Network_eph... dvportgroup-847 0 ephemeral

  ManNetwork_ephemeral dvportgroup-848 ephemeral 0

  vMotion1 dvportgroup-51 128 static

  KSPD dvportgroup-50 128 static

  vMotion2 dvportgroup-52 128 static

  GZ_Interconnect. static 128 dvportgroup-49

  INET_UITIS dvportgroup-339 128 static

  ManNetwork dvportgroup-47 128 static

  INET_GUEI dvportgroup-48 128 static

  Then, if I try this:

  PS C:\Windows\system32 > $pgs | foreach ($dv Get-NicTeamingPolicy - VirtualSwitch - VirtualPortGroup $_)

  I got an error on the conversion of 'VMware.VimAutomation.ViCore.Impl.V1.Host.Networking.DistributedSwitchImpl' in 'VMware.VimAutomation.ViCore.Types.V1.Host.Networking.VirtualSwitch '.

  If I try this:

  PS C:\Windows\system32 > $pgs | foreach (Get-NicTeamingPolicy - VirtualSwitch $dv.name - VirtualPortGroup $_)

  I got another error on the conversion of types of vportgroup 'VMware.VimAutomation.ViCore.Impl.V1.Host.Networking.DistributedPortGroupImpl' in 'VMware.VimAutomation.ViCore.Types.V1.Host.Networking.VirtualPortGroup '. No luck with "..." -VirtualPortGroup $_.name' also, it says that I can not specify type string as input for - VirtualPortGroup.»

  It seems that "get-nicteamingpolicy" comandlet cannot take dv types as input, but I don't know if.

  Seems I forgot, you must use Get-VDUplinkTeamingPolicy to VDS switches

• Add the new payment group

  Dear,

  Could someone explain in details the steps to create the new group of payment like cash on delivery?

  Please don't tell me to refer to the documentation because I did not understand what

  http://docs.Oracle.com/CD/E26180_01/platform.94/ATGCommProgGuide/HTML/s1008extendingthepaymentprocesstosupp01.html

  the implementation is not clear

  Any help is appreciated... Thanks in advnace

  Create a payment CashOnDeliveryPaymentGroup extension of PaymentGroupImpl with its group properties

  create the interface and implementation classes - CashOnDeliveryProcessor with the following methods

  Public CashOnDeliveryStatus permits (CashOnDeliveryInfo, cashOnDeliveryInfo, CashOnDeliveryPaymentGroup cashonDeliveryGroup);

  public CashOnDeliveryStatus flow (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);

  public credit of CashOnDeliveryStatus (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);

  Create CashOnDeliveryProcessorImpl application CashOnDeliveryProcessor processor pipeline

  Create CashOnDeliveryStatus PaymentStatusImpl extension

  create ProcProcessCashOnDelivery payment processor that extends ProcProcessPaymentGroup and replace authorizePaymentGroup, creditPaymentGroup and debitPaymentGroup methods to return the CashOnDeliveryStatus object

  Create a bean object of CashOnDeliveryInfo containing all the data required by the methods of CashOnDeliveryProcessorImpl

  Create ProcCreateCashOnDelivery pipeline processor, which should create CashOnDeliveryInfo and add it to the object PaymentManagerPipelineArgsDictionary

  Add the pipelinechain in paymentpipeline.xml for an example

  Add the new entry in PaymentManager.paymentGroupToChainNameMap

  & paymentGroupToChainNameMap =.

  xyz.payment.CashOnDeliveryPaymentGroup = cashOnDeliveryProcessorChain

  Add the new class to the paymentTypeClassMap and add the new class of real estate beanNameToItemDescriptorMap to OrderTools and

  & paymentTypeClassMap =.

  cashOnDelivery = xyz.payment.CashOnDeliveryPaymentGroup

  & beanNameToItemDescriptorMap =.

  xyz.payment.CashOnDeliveryPaymentGroup=cashOnDelivery,\

  xyz.payment.CashOnDeliveryStatus = cashOnDeliveryStatus

  In OrderRepository.xml

  Add to the point-descriptor paymentGroup

  create descriptor of the item with the properties and create the db as a result table

  Regardless of the required properties

  Regardless of the required properties

  It could be useful, Wow I spent 20 minutes on this

• Add the new disk group to the existing group

  Hello world

  I have a Dell T310 server with a PERC 6 controller. My current setup is:

  Disk 0-1 TB

  1-1 TB drive

  Players above are mirrored and partitioned the drive C and D.

  The first problem I have is the drive C: is 40GB (from the factory) and is running out of disk space.

  I bought 2 2 TB drives and was hoping to install readers, their mirror and more 1 TB disks and use the disks of 2 TB as the new D: - I would image current data on D for new readers.

  I have installed 2 new readers (2.0 TB), but when I go into the settings of the raid controller I am only able to assign spare readers?

  Can someone please let me know what I am doing wrong?

  I already have a full backup of the server.

  Thank you.

  CSFD

  Start CTRL-R, VD MGMT, highlight the controller in the left upper corner, F2, Create/New. (Don't forget to select advanced options and Initialize boxes.)

• Automate the network port group selection in vsphere replication

  Hi, when you use the vsphere replication tool to recover servers in the data center of DR, the tool does not gives option to select network settings. I have to manually add the port groups and turn on the system remotely vcenter. Is it possible to automate this process, when the replication of a major part of the vms ~ 100-150. I would like to know if there is another way to fix the process and avoid the manual load.

  I use replication of vsphere device version 5.8

  Thank you

  The only way to automate this process is through the Site Recovery Manager.  Automate and orchestrate BC/DR is a big part of the value offered by SRM. The other advantage is the ability to test your recovery plans without disruption of service.

  Does that answer your question?