Add the template to measure continuously from its acquisition

Similar Questions

• How one move the templates of virtual machine from one host to another host in the cluster even

  Hello

  Can you get it someone please let me know how to move the templates of virtual machine from one host to another host in the cluster even?

  Thank you

  James

  Welcome to the forums!

  Convert it to a virtual machine (right click on guest and choose the appropriateoption), move it through the migration feature (right-click Guest, and then choose "Migrate") and convert into a model (right click on guest again and choose to convert to a template).

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• How can I customize the folder icon and add the template to all subfolders

  IM using Windows 7

  In the My Pictures folder, I have many many separate subfolders. I have no problem customizing folders one by one, but check the box "Also add this template to all subfolders" does not work. It does, however, if I check this box to display the same image IN the folder.

  This isn't a matter of life and death but Ive got about 200 subfolders (with graphics) and modify them individually will be soul destroying and dead all simply too short.

  Ive tried select all and change properties, but modifies only the 1 folder which has been a right click

  Ive looked for questions but the problem has not been raised. Any help would be appreciated.

  Of course, here's how with a quick video demo: easily apply Windows folder to all subfolders display

• The letter 'a' becomes separated from its associated Word and is placed on a line separate from his own. For example, I opened my Firefox home page and ther I my BT mail alerts. It spreads as described previously. All comments patches?

  See above question

  I think I found the problem. There is an additional toolbar, my son had downloaded. I uninstalled it and the problems... I think so

• Automation error: The object invoked has disconnected from its clients when the exe to exectuted the VB6 for the second time

  Dear all,

  I had this really common automation error when I run an exe file created by Visual Basic 6 for the second time. Whenever I ran the program for the first time that it works really well. But the second time always fails. When I ran in debug mode in Visual Basic 6, sometimes it worked. I checked the code and found it would be discontinued in the next part - CommonDialog1.ShowSave.

  ReDim SelectedVar (1 NumSeleVar)
  ReDim SelectedVarTxt (1 NumSeleVar)
  I have = 1
  For j = 1 To NumVar_GasPlants
  If chkOpt (j - 1). Value then
  SelectedVar (i) = j
  SelectedVarTxt (i) is chkOpt (j - 1). Legend
  i = i + 1
  End If
  Next J

  'Get the name of the export file.
  If not g_RunOutputMacro then ' check-out
  CommonDialog1.cancelError = True
  CommonDialog1.InitDir = curCasePath
  If IsMonteCarlo then
  CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & "_" & cmbMonteCarlo.Text & ".csv".
  On the other
  CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & ".csv".
  End If
  CommonDialog1.Filter = ' (*.csv) | * .csv.
  CommonDialog1.FilterIndex = 1
          CommonDialog1.ShowSave
  SelectedOutputFile = CommonDialog1.FileName
  On the other
  SelectedOutputFile = g_Output_FileName
  End If

  I have been tormented by this problem for almost a month. Any suggestions or ideas would be very appreciated!

  Thanks a lot guys!

  Hello

  This problem would be treated better in the MSDN Visual Basic forums. Expertise it can help you with this problem.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Thank you

  Stephanie Podder

• White space removed while the text is cut off from its position

  Hello

  I am facing a problem in InDesign CS4 or later demand.

  I have a text like:

  "The physical state in which a polymer may exist can be idealized by first examining a string of very long, regular polymer. .

  {{1 AQ}}because these properties are dominated by the extreme length and chain - like structure of these molecules and not by their actual chemical composition. »

  When I cut the text {{AQ 1}} of the paragraph, the space before the text is deleted and becomes as below:

  "The physical state in which a polymer may exist can be idealized by first examining a string of very long, regular polymer. .

  The reasonis that these properties are dominated by the extreme length and chain - like structure of these molecules and not by their actual chemical composition. »

  Can I get any solution for this problem.

  Thank you

  Gopal

  In text preferences, check that this preference is turned on: adjust space automatically when cutting and pasting words.

• How to move templates of virtual machines from one host to another, if the partners host is offline

  Hi people,

  I knew that I need to convert a virtual computer model to a VM to move from one host to another, but that when the host, that the model is associated with, is offline / broken? Is it possible to make it work again on the vsphere client or only via the command-line interface of cmd and save the model with the host?

  Thanks in advance.

  Kind regards

  Bjoern

  You can try this...

  If you have another ESX host to add the data store to which the template is stored.

  After that browse the data store and go to the directory of the model. Select the model VM file and add it to the inventory and select the host on which you want to add the template... After you have added the host convert VM...

  Thank you

  Please indicate if useful...

• How to add the phase parameter to array of waveform in the DaQmx continuous output example?

  Hi all

  I'm quite beginning to Labview. I just wanted to know how can I add stage information for the module of waveform existing as shown in the example of output Voltage-Continuous DaQmx.

  SEEE attached, I thought that the "output" is actually a built-in control, is there anyway I can add the phase as an additional parameter which?

  Thanks in advance for any help.

  Eric

  If you press ctrl + H, the context help window opens, and you can hover over the generating function VI to see its inputs/outputs, but also to navigate to the detailed help. As you can see from this screenshot, there is an exit for the phase which is separated from the output waveform.

• Error message: failure of the last attempt to resume the system from its previous location

  I have problem, I can't do anything computer just stuck on the error message screen that reads "the ultimate attempt to resume the system from its previous location failed", the keyboard does not work I can not choose between the choice that is to say 1. continue with the curriculum vitae of system or 2. delete restore data I can't even boot from an installation CD. Help, please

  Hello aliciamulrainqz,

  Apart from questions of Gerry C J Cornell, I have included a link below where the user reported an error even.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/delete-restoration-data-frozen-Win7-Prof-64/36407a58-e66b-43DE-A21D-f118c85153b4

  Thank you

• Why the links in the template to change the location to "file:///'...on the pages created from the template?

  I'm not sure what I am doing wrong but I am building a portfolio site of a model that I downloaded online.

  The site works and I'm slowly converting from the content of the template for the content I want.

  As I'm editing the site and adding several pages, I decided to try to add the header, the footer and the bar of navigation as a model with another container Gallery and navigation as an option on the model.

  I thought it worked very well until I noticed that the links on pages created by using the template are displayed as follows.

  instead of links that were in the model which show that,

  

  Is this something that will change when I download the site with the model or did I do something wrong links?

  You save your child page yet?  You must do the same. Once registered, DW will adjust the paths for you.

  Nancy O.

• How to read continuously from the rs232?

  Hello

  I'm new to LabVIEW and my questions would be obvious for some for you. So please help if you know the solution.

  It's for my school project. For your information, we need to schedule a Committee of Altera DE2 to control traffic lights (something like that) and at the same time, the Commission shall forward the States of enlightenment to a computer with LabVIEW installed via an RS-232 cable.

  The rest of the project was fine except for the part of LabVIEW, because as I said earlier, I'm new to LabVIEW.

  We use the "basic series write and Read.vi" in the folder examples of NEITHER. The problem is that we do not know how to change the vi in order to receive the data that come the DE2 Board permanently. Each time, the vi stops reading after receiving 24 bytes of data.

  So, the first question is:
  1.) how to read continuously from the RS-232 port? (We tried to use while "loop" but without success, maybe we were doing it the wrong way.) If you know the solution, please enlighten us for us in a detailed manner.

  (2) Secondly, once we have received the 'chain', how can convert us to bits (0 and 1) so that we might be able to manipulate the bits, for example turn on the LEDs that correspond to the bits.

  Thank you.

  Instead of reading the bytes of the port so to read that many bytes (which may be zero), just do a VISA read for 1 byte.  He will wait for this next byte.

  To get an array of Boolean out of this byte, use this code.  He turns the characters into a byte array.  Takes the first and the only element of this array, and then converts this single U8 number into an array of bytes.

  

  Which country are you?  I've never seen or heard lights orange before.  Only the yellow lights.

• Using the DAQ Assistant. can I create a VI that measures continuously during a fixed time?

  I use LabView to an NI USB-6009 enclosure, with two accelerometers like my analog input. When you use DAQ Assistant to build my VI I have not seen an option to measure continuously for a set amount of time. I need the test to run for two seconds and then stop.

  Is there anyway to specify the exact duration of each test?

  It's about as simple as you can get. Set the number of samples to be twice the sampling frequency (or whatever the multiplier that you want). That's it - a simple DAQ Assistant and nothing else on the block diagram. If you need it to be variable, just wire a control of the number of input samples.

• Windows 2K 3 is removed from the network, every hour, sixth of its previous disconnection

  Hi all

  I have a problem here in a production environment. We use the combination W2K3 SP2 and SQL 2008. It is the server gets disconnected from the network, every hour, sixth of its previous logout. SQL resources are working well, but the server itself becomes not accessible. When I mean the server by its IP address or name DNS etc.

  While closely watching the issue, we found that even the RDP connection to it expires exactly at the same time. It's just an interruption of 10-30 seconds, and after him, everything is normal. Only clue is, it happens exactly every sixth hour. We also found his happens for all servers in the VIRTUAL local area network at the same time.

  Sixth hour that I mean, is the model... for example it happes to 09:15 then it will happen about 15:16 and then 21:17, then new tomorrow 03:18, 09:19, 15:20, 21:21 etc. If this isn't exactly every six hours, it every hour, sixth of its previous logout. The calendar is always in motion.

  Note:

  DHCP is not enabled on the server. Its configured to use a static ip address. The server is based. No DHCP server in the environment.
  Client DHCP is running on the machine to register DNS for the DNS server. No windows firewall is turned on.

  So its more like a configuration problem which is something set up to do something every time sixth from his previous instance.

  Please let me know if you think anything.

  Thank you
  Damien

  Hello

  We have a separate Department of Microsoft who work with servers. Thanks for posting your query in the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Thank you

• Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.

  I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?

  Found a solution to this problem.

  Go to the folder parent of the folder that contains the files with this unknown account number:
  1. right click on the PARENT folder, and then click Properties.
  2. on the Security tab, go to the advanced options (bottom window)
  3. in the new window, click the button change the permissions in the bottom.
  4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
  5. check "replace all permissions of child object with permissions inheritable of this object.
  6. click on the OK button or apply and done, fixed number.

  Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.

• How add us shortcuts of applications downloaded from the app Store? (RT surface)

  Original title: App shortcuts

  Hello

  How add us shortcuts of applications downloaded from the app Store? (RT surface)

  For example: Skype shortcut on desktop

  Hello k0mrade,

  You can create shortcuts on the desktop for versions of the apps Web page, but not applications, in the strict sense. The version of the app Web page often has more features and options.

  The example you give is a good thing. If you go to the Skype Web page, you can do this Web page a favorite in user IE10 or IE10 Desktop interface. It also works with SkyDrive, Hotmail, Outlook.com, or any Microsoft service available on the internet.

  Once the favorite is created, open the Desktop IE10, then open Favorites and drag the symbol from the Web page Favorites and on the desktop. It becomes a shortcut on the desktop to this Web site (but will most likely open on the side of the user interface).

  In addition, if you use the same Microsoft account to connect to Windows RT, that you will use to connect to the Microsoft Web pages, when you open the shortcut that you'll already be connected.