White space removed while the text is cut off from its position

Similar Questions

• During printing or print preview, I see only information in the top left quarter of the page and the text is cut off. It only occurs when printing to HTML.

  This does not occur when you print office documents

  Hi BrucePerraud,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you use any web browser to print HTML format?

  Try the procedure if you are using internet explore web browser below.

  Method 1

  Check if Add-ons installed on the Internet explore is the origin of the problem. I suggest that you try to open Internet explorer without modules and check if the problem persists.

  (a) click the Start button, click all programs, and click Accessories

  (b) click System Tools, click Internet Explorer (No Add-ons).

  How the modules of the browser affect my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-browser-add-ons-affect-my-computer

  Note: Above article also applies to Windows XP operating systems.

  Method 2

  If the previous step fails then try to reset the internet settings explore by default and check.

  For more information please visit the link below.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

• Text to be cut off from buttons

  Would be grateful for any help anyone can offer.  Have created a drop-down list (create a MovieClip and then inside to create the drop down on the next section) everything is great, until the appeared as a movie when the text gets cut off and then at the end.  I tried what actually more small etc, but not joy.  Any notice received with gratitude. I thank you in anticipation Ani.

  

  If the text fields was created manually and then simply increase its width manually... sometimes the size of the text change a little bit the runtime...

• in InDesign CS6 text appears white when I select the text... :(

  For some time in InDesign CS6 text appears white when I select the text. And remains white when I it deselect.

  It is necessary to another page, higher or lower, to have the text re-appear.

  Mac OS X El Capitan 10.11.6

  InDesign 8.1.0.419

  Make Explorer 5.5

  Adobe fonts

  If anyone has an idea...

  PS Yes:

  -J' cleaned out font caches

  -J' deleted Indesign preferences

  If you mean that the text seems to disappear, then it seems to be a relatively common problem with CS6 in El Capitan.

  I use CS6 with El Capitan and you encounter this problem sometimes. It happens constantly some days and other days not at all, but I've never established exactly what triggers it.

  As Bob says, CS6 is not supported, so it will not be a solution, but if this is the problem that you are experiencing then tap the display between 'Preview' and 'normal' pressing 'w' will fix it - temporarily.

• Text in tables is rough, while the text outside the table is clear

  Hey,.

  I am designing a Web site, I use tables to organize my work/design. However whenever I type text in my table is rough and very unattractive. While the text I type outside the table is perfectly crisp and clear.

  Could someone tell me what I am doing wrong? Or an alternative?

  Here is a picture showing my problem, the picture would be text at the bottom of the image.

  http://img696.imageshack.us/i/roughtext.jpg/

  With the help of:

  Adobe Dreamweaver CS4

  nicknackhack wrote:

  It seems that this could be it, but how to fix it?

  Thank you for your response so

  Change of the to

  When you insert a table on your page, you are presented with the option to use (table headers). If you do not want to use them do not select this option.

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos

• Why the text "adobe after effects" made its appearance in my rendered composition?

  Why the text "adobe after effects" made its appearance in my rendered composition?

  Probably because you have applied a predefined text animation and did not change the default text for this.

• I see that a small part of the text in the url bar, the rest is cut off.

  Recently, my url bar displays only the first handful of letters in my url. If I use the arrow keys, I can see all the text is there, and hit enter brings to the top of the right-hand page, so is not cut the text, just the screen. About the first 15% of the present url bar text, while the bar remains is just gray. I am currently on 16.0.2.

  This may be a problem with AuthenTec TrueSuite.

  See:

  • [937571/questions/937571] Firefox address field to hide the last part of the address when loading

• selection remains after the removal of the text, unexpected text now selected

  DW 13.2 build 6466

  Mac OS X 10.9.3

  Repro: select characters or lines of text.  (JS, CSS, HTML) content type is not relevant.  Delete the text.

  Expected: deleted text, without the selected text.

  Real: deleted text, remains of selection, but with the new selected text (selection not deleted).

  Result: Deleted unexpected text (equal to the size of the selection).

  No matter if I delete the text, and then type a character or just type a character to replace the selected text.   I always lose the removed part, and character input replaces the new text (incorrectly).

  This isn't the bug "my selected text was deleted.

  I tried:

  • deactivation of the voice/dication
  • reset
  • rebuild the site cache
  • deletion of the user configuration files
  • hit his head on the table.

  any suggestions are appreciated...

  Thank you

  Michael

  This is me!!!  ... lazy new user trackpad!

  (1) select text with lazy 3 fingers.

  (2) KEEP lazy fingers on the trackpad while pasting or typing

  (3) now - replaced text not desired to get selected, resulting in head banging on the table.

  solved!

• Table header row gets cut off from view when the text block is resized

  I'm designing a table that has a header row, 6 body rows and 5 columns. I want the header skewed to 20º and rotation type of needles from the same angle. Knows someone who worked with tables, it is not possible to rotate the text to this value via the parameters of the cell, but the job is to split the table into two blocks of text. The lower sash will be the body lines, but the Executive must have the header where it gets skewed to the specified angle. The text must be created in separate and then cut and paste frames in each column header and then it can be rotated.

  The problem I have is when I try to drag the bottom of the text block to the top while the header remains visible, the header gets cropped view. The only way to prevent it from is Cup is I leave the first line in the frame, but then it gets skewed is not what I want. It seems that the block of text ignores the header still exists. The screenshot below has two tables. The top version is the one that I want to apply the effect to. The bottom has the effect, but his top line is a line of body (not a header).

  

  I don't think that it is possible to have a heading row without at least a body line in the framework...

• Setting white-space characters in the data source using ODI.

  Hello
  
  I have a requirement in which I'm traction tables of MSSQL server to a target Oracle using ODI table. We have seen that the data that we pulled had white space and to avoid white space, I used a TRIM (field) in the interface for each column. This solves the problem of white space, but the problem is that we had to implement the TRIM function for all columns in all the tables that we had to pull.
  
  Is there a global way to ODI where I can cut all the columns of a table without having to manually use the TRIM function in each column of the table? Kindly let me know that save us a lot of manual work as we need this comprehensive method on 300 + tables.
  
  Kind regards
  John

  No problems.

  Use:

  <%=snpRef.getColList("", " trim(:[COL_NAME]) :[COL_NAME] " , " ,\n\t", "","")%>
  )

  It works.

  Please, don't forget the 'Useful' or 'Correct' status for each answer that will help you!

  Cezar Santos
  http://odiexperts.com

• Screen freezes and text operations hold after you select the text to cut or copy

  Recently, I met a problem with the processor.  When I highlight text to be cut or copied, the system crashes.  The image of the screen turns off so I can still see the text but cannot move the cursor or perform all functions.  After 30 to 60 seconds, it emerges, and I can start working again.

  Hi RickSmith,

  1. did you of recent changes on the computer?

  2. only the problem occurs only on the program word or even Notepad?

  3. When you copy the text too?

  4. What is the problem with processing?

  I suggest that you check if the problem also occurs when you use the notebook as well.

  Check if the problem persists in safe mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem does not persist in safe mode then I would suggest that you do clean the clean boot procedure and check.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• White blocks appear above the text. Export in the same way.

  Hi all!

  I am under Photoshop 2015.5 and CR 9.6.1
  I have created a flyer and I keep running into this strange issue.

  If I click in a text layer to change the text, this appears perfectly.
  But when I click on get out a white block will appear on a part of the text.
  The block moves at random as well.

  I had the problem of white and black last year block, and blocks never exported.
  They do so.  They export in ' Save as ' and 'save for Web '.

  
  Here is deselected

  

  And now selected

  

  It makes me crazy billy because I can't even export these to my client.
  Here, it is exported.  It copy and stick as well. You can see them randomly everywhere.
  

  And here's what I'm running if it's important.

  

  
  Thank you very much for your help!

  AHA! , the Point, I just

  in the options bar for, Select the text layer and set of anti-aliasing to "strong."

  

• Captivate output 9: the legend text is cut off

  Hello

  I publish a course "for devices", a sensitive project. In some cases, my text on screen, placed in the text of the legend, is cut according to the size of the viewport. I hope that the text would rather than cut across. Regardless of the browser or the device - is the same. On each of the three sizes different default (from office, portrait of mobile tablet portrait), I fixed the text to fit. In the view of the office, I had my bounding box where I want and say that the font size is 24. According to the portrait of Tablet, I have slightly modified the framework encompassing and also changed the font size, let's say 16.

  If a browser window is between one of these formats, the text is truncated and sometimes words are missing or cut off showing only a part of the letters. I looked on the blogs and I googled all out.

  Does anyone else have this problem? Do I need to add provisions to display additional window for these intermediate sizes in order to minimize the probability of that happening? Or is it a setting I'm missing? I'm doing something wrong or is this a bug?

  

  Thank you!

  You must DESELECT Autosize captions!

  With respect to the position properties, I would set the width in % and the height to Auto. Which should force the fixed aspect ratio.

• "Highlight" white lines appearing above the text and don't know why?

  Hello comrade InDesigners,.

  I am very confused! I have blocks of white highlight type appearing above my text and I can't understand why.

  I moved the text to the sidebar box and took a screengrab so you can see what Im doing refers to.

  I tried to create a new text box and apply style sheets to get and I get the same results. Any help on troubleshooting of that would be amazing.

  Thank you!

  -Kelly

  It seems you have nets of paragraph in your style sheets.

  Search for the rule above, and rule below.