Add UN tercer rigid SATA II in the SAN

Similar Questions

• HP Envy 750-197c Desktop: you can add a SSD internal flash disk to the envy of HP 750-197c Desktop

  You can add an internal SSD to the envy of HP 750 - 197c Desktop that has a 2 TB drive installed?

  DMSIceman, welcome to the forum.

  Yes, you can move the HARD disk and install an SSD.  You will need to buy at least a 128 GB SSD.  Here is the data sheet for the computer.

  The best way to install an SSD is to leave the current HARD drive as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the software of Migration data provided by the SSD manufacturer on the HARD drive.  Once installed, open it and follow the instructions carefully.  You choose the SSD as a target.  After the data is transferred from the HDD to the SSD, you can disconnect the HARD drive and start the computer.  It should start on the SSD.  Then, you can disconnect the SSD to the first SATA connector and move to another Bay HARD drive and connect it to another SATA port on the motherboard.  You can use it for storage.

  I like the SSD Samsung EVO.  Samsung offers its data Migration software to clone HARD drive.  In addition, they provide their software Wizard to optimize the performance of the SSD.  You can find all the software at the bottom of the page in the link I provided for the EVO.  The Samsung SSD were good about starting in HP computers without changing the BIOS settings.  You will need to buy an adapter to allow the reader to 2.5 "to fit into a 3.5 Bay".

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Can I use a SATA drive in the virtual host as a SCSI disk in virtual machine?

  I'm under (64-bit) 2008 R2 RC as host and VMware Workstation 6.5.2. I installed a linux VM, the distribution doesn't really matter, but now I use Debian 5.01 AMT64. I am trying to use SATA drives to the host as drive virtual in the VM, but not successful. Here's what I did.

  -In the virtual machine of VMware Workstation. Add - & gt; hard drive - & gt; use a physical disk - & gt; Choose the device (use entire disk) - & gt; Finishing

  The drive is affected as IDE drive. Here's the first question, I can use it as a SCSI drive? There are only 4 available in CD-ROM and VM IDE drive takes one. I want to be able to use 10 disks.

  -L' use above configuration, if I start the VM, I don't know where devices are. I can't find any device in the name of/dev/hda, / dev/hdb etc.

  Here is my second question. Where are the devices on a virtual computer that were created as virtual disks?

  Hello

  with 2 k 3, you won't have these problems.

  VMware affect physical as IDE disks if the host sees as IDE. He attributes as SCSI host sees the SATA or SCSI drives.

  If you want to change that - you can use this old post of mine. If the descriptor of uncertain post before use you it so that I make the changes.

  Ulli

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• We can add money on an iphone to get the new, a good way would it cost?

  We can add money on an iphone to get the new, a good way would it cost?

  You must speak to your support for example provider (at & t, Verizon, etc.) about adding money to pay your device if not already eligible for an upgrade. Hope this helps, good luck to you.

• Mozilla firefox add-ons Manager page is not in the correct format and error in installing addons?

  page of the Add-ons Manager makes its appearance in the basic format and when I search for add ons, it shows the result, but without images (to the basic format). Cannot install them too.

  If you can, take a snapshot and post it here for us to see.
  
  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• How can I disable "SATA" option in the BIOS PHOENIX Satellite M70

  My laptop is toshiba satellite M70
  He has PHOENIX bios
  is there any FLASH ACPI for this Bios for me to set the property as DISABLED SATA?
  OR I can DISABLE this property is the current BIOS?
  Thank you very much...

  Satellite M70 does not support this feature in the BIOS!
  This means that you will not be able to disable the SATA feature!

  As Akuma, you need to install the SATA driver first.
  You can do this by using the USB external floppy drive or you will create the new CD of Win XP and will include the SATA driver using the free tool called nLite.

  So if you don t have an external USB FDD drive, you can use nLite.

  Search here in the forum for nLite and how to include the SATA drivers.
  There are a lot of announcement about this procedure.

  Good bye

• Have XP Pro with the Panel open, click on add/remove progs - nothing happens. All the other c/Panel open Fredrick help OK

  Have XP Pro with the Panel open, click on add/remove progs - nothing happens. All the other c/Panel open Fredrick help OK

  Hey Fredrick,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the following command:

  Start, run, Appwiz.cpl

  Check if you can run the Add / Remove programs.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How do you add a location to send it to the list when you right click on a file or folder?

  How do you add a location to send it to the list when you right click on a file or folder. I am trying everything I need to go clean my hard drive to a USB key. There are seven choices on the list but I need to change the list, so change 2 of the seven choices. Thanks for any help.

  original title: moving files and folders

  Hello.

  When you plug in your USB key and installed the drivers for it; It should then appear when you right-click on a file > Send to.

  See you soon.

• Can cling to the blue SATA port on the Mobo for optical drive SATA HDD

  Studio XPS 435 t/9000 Office

  Service Tag:

  This box has the following motherboard in it.

  X501H Dell Studio XPS 9000 435 t LGA1366 Intel X 58 + ICH10R DDR3 motherboard series

  There are (5) SATA ports on the internal motherboard.

  
  SATA1, SATA2 - blue color Code, I (1) optical internal drive attached to the SATA1

  SATA3, SATA4, SATA5 - black color code, I (3) HARD drive connected 3,4,5

  The blue color SATA2 port is open

  Can I connect a 4th HDD SATA blue SATA2 port?

  Or are the blue SATA ports only for optical drives

  It will cause some problems if I hang a 4th HARD drive SATA2 port blue

  Hi rgadawg,.

  Welcome to the community.

  Blue SATA2 port must be compatible to connect to another hard drive. He should not ask any questions however, Studio XPS Installation Guide Page 57 under specifications says he has three bays for hard drives SATA 3.5 inch disk.

  http://Dell.to/YbYwib

  Thank you & best regards
  Mustapha S
  #iworkfordell

• How can I change the player assigned to the SSD for a SATA instead of the SCSI drive?

  Original title: SCSI instead of SATA

  I built a PC with Windows 7 Ultimate 64 bit.  My C: drive is a Samsung 840 Pro SSD.  The system never worked properly and I discovered that the SSD which is a SATA 3 drive in Device Manager is configured as a SCSI disk.  Someone knows how to change the driver assigned to the SSD for a SATA instead of the SCSI driver?

  Hello Uriel,

  Thank you for your response.

  SATA controllers will normally appear as "SCSI" controllers in windows. It's normal and nothing to worry about. Often the SATA controllers will also be able to run in IDE mode and then they present themselves as IDE controllers, but it is unlikely that they will be able to operate optimally, as the IDE interface is missing some features of SATA. So even if you do not have the ability to set the cache in the Device Manager, a SATA controller is running in mode SATA should work just fine.

  The IDE bus is managed by the controller SATA3, and if this control is set in the BIOS to "IDE" somehow it seems related to the operating system as a SCSI device.  By setting this entry in the BIOS to "RAID/IDE" IDE devices get properly detected.

  This can also occur if you change the BIOS settings for the SATA ports of 'IDE' to 'AHCI' after installing Windows 7.

  I hope this information helps.

  Thank you

• How can I add "Shut down" as an option for the action of the Power button if it is not available

  How can I add "Shut down" as an option for the action of the Power button if it is not available.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you want to add shut down as an option for the power button.

  Visit this link and try the steps mentioned:

  There are two ways to change what happens when you press the power button on your computer. You can change what happens when you press the power button on your computer case (or the edge of your laptop) and you can change what happens when you press the close button in the start menu.

  Change what happens when you press the power button on your computer

  http://Windows.Microsoft.com/en-us/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Hope this information helps. If you have questions to answer us and we will be happy to help you.

• How add us shortcuts of applications downloaded from the app Store? (RT surface)

  Original title: App shortcuts

  Hello

  How add us shortcuts of applications downloaded from the app Store? (RT surface)

  For example: Skype shortcut on desktop

  Hello k0mrade,

  You can create shortcuts on the desktop for versions of the apps Web page, but not applications, in the strict sense. The version of the app Web page often has more features and options.

  The example you give is a good thing. If you go to the Skype Web page, you can do this Web page a favorite in user IE10 or IE10 Desktop interface. It also works with SkyDrive, Hotmail, Outlook.com, or any Microsoft service available on the internet.

  Once the favorite is created, open the Desktop IE10, then open Favorites and drag the symbol from the Web page Favorites and on the desktop. It becomes a shortcut on the desktop to this Web site (but will most likely open on the side of the user interface).

  In addition, if you use the same Microsoft account to connect to Windows RT, that you will use to connect to the Microsoft Web pages, when you open the shortcut that you'll already be connected.

• When using an adjustment layer to change the hue/sat (to make the fall colors), how to change hue/sat off the clothes clients and faces?

  When using an adjustment layer to change the hue/sat (to make the fall colors), how to change hue/sat off the clothes clients and faces?

  Choose the mask on the layers adjustment layer and paint in black in the areas that you don't want the adjustment layer to change

• I currently have creative cloud of a photographer.  I must add my subscription first.  What is the best way to go with the best available prices?

  I currently have creative cloud of a photographer.  I must add my subscription first.  What is the best way to go with the best available prices?

  Hello

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud for plans.

  Otherwise, you can talk with the sales of Adobe as well.

  I recommend going for the plan of single-app.

  Kind regards

  Sheena