Add / Update button plenty of activities (from project templates)

Similar Questions

• pages created from a template reflected no change

  So I created a template file in dreamweaver.
  
  Then I created 2 pages out of the model. Later, I changed the template (I have replace the semicolons with an asterisk). I saved the template, and he asked me if I wanted to update the 2 pages created from the template. I said updated.
  
  Unfortunately the colon had not been replaced by asterisks. Why not?
  
  How can I tell dreamweaver to force the model on pages again? Thank you.

  Here are seven common mistakes which will result in changes not multiplication
  a model for child-

  1 rename the Templates folder
  2 move the folder models to another level of folder in another site
  only the root level
  3. move a template outside of the Templates folder.
  4 changes to an editable model (which will not
  spread)
  5. assume this model changes can be downloaded to the server without also
  Download the modified
  6 corrupt the site cache to make the link between the model and the child page
  is broken
  7, bad create your child pages simply by opening the template.
  adding specific content of the page and re-register the model with a *.html
  extension rather than its *.dwt extension. (you can tell if this is the case
  looking at the code on a page of the child - if you see something likeHi all!
  
  I use Oracle Forms 6i and here's my problemm...
  
  I am trying to add a button in my forms that will update records in my table.
  For example, I have a datacolumn «TYPE_OF»... ', in my forms, I made a ListItem for this column where I choose the type.
  I made a recordGroup to automatically fill this element and everything works fine.
  
  Now when I press this button of mine (I named it 'Change') I want to update my record and save it with the other type that I choose after first save it and recording previuos with the 'old' type should be cleared (for not having both records subsequently).
  
  I started like this:
  
  1 made an alert (named "RPD") who will ask me when I press the button if I'm sure I want to change this record.
  2. alert don't have two buttons 'Yes' and the «»
  3. when I click on 'Yes' my record is up to date, otherwise nothing happens
  
  Here is the CODE that I wrote in WHEN-PRESSED shutter BUTTON (it does not, normally, because I'm quite new in PL/SQL programming):

  DECLARE
       a NUMBER;
  BEGIN
       a := SHOW_ALERT('SPR');
           IF a = Alert_Button1 THEN
            UPDATE My_Table (in my case name of the table is DOKUMENTI_GLAVA_UV - it's in Slovenian and it means Documents_Head)
            SET TYPE_OF.. (my case VRSTE_TEMELJNICE - means type of journal) = :D.TYPE_OF..; (my case - D is name of the block)
           ELSE
                RAISE FORM_TRIGGER_FAILURE;                  
    END IF;            
  END;

  It gives me error and says my_table must be declared.
  
  All I want is the CODE for my trigger and some tips, if I do something wrong or I'm doing something that it cannot do that.
  
  Thank you!

  What kind of errors you receive now if the error 'must be declared' is resolved?

  >
  Just to answer your question the D block is a block of data, but I have to do because the 'VRSTE_TEMELJNICE' element is not editable (authorized update is set to NO) and it must be this way, so I can't just leave forms to update the record.
  >

  Even if you have the item property of the "update allowed" the value 'No' you can always update the element with the logic of the trigger. The user will not be able to when they run to the form, but you can allow forms manage the update of the database, which isn't always as with DML. Try changing your CODE. WHEN BUTTON PRESSED trigger logic to:

  DECLARE
    a NUMBER;
  BEGIN
    a := SHOW_ALERT('SPR');
    IF a = Alert_Button1 THEN
      :D.VRSTE_TEMELJNICE := :D.TYPE_OF...;  -- Whatever the real names of the blocks and items are
    ELSE
      RAISE FORM_TRIGGER_FAILURE;
    END IF;
  END;
  

• Can I add a button in Captivate 5 imported from PowerPoint?

  I imported a PowerPoint in Captivate and add a button.  When the user clicks the button, it is supposed to open a URL.  When I publish the movie, nothing happens when I click on the button.  I tried this on several different computers.  I also tried to insert a blank slide in Captivate and adding the button to this slide and nothing happens.  I checked that I can add a button similar to a Captivate presentation which is not composed of PowerPoint slides.

  I'd be able to do this?

  Thank you.

  Hello

  It is a very common and known issue.

  See the link below.

  Click here to see

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How do you add music to windows movie maker from itunes

  How to add music to windows movie maker from itunes

  Convert clips to the. WMA format, then
  import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How is it that after I put 41.0b1 as a 'update crucial"my youtube DVDVideoSoftware updated buttons are disabled?

  How is it that after I put 41.0b1 as a 'update crucial"my youtube DVDVideoSoftware updated buttons are disabled?

  Maybe it's because the add-on is not longer supported by the latest version of Firefox. You can try to see if a new version of the add-on is available and can be downloaded. If this is not the case, contact the developer so they can inform you of alternatives or when the add-on is working again.

  Thank you!

• I am trying to add my Linux netbook to my sync account, but both my windows computers will not display the "Add Device" button in one of the sync management screens

  I'm trying a new version of Linux on a net book I use to play with non windows OS. In the process of setting up the new OS install I wanted to make my Firefox account set up so that I didn't have to spend a lot of time working on something. I'm no stranger to sync of browser and several of my computers and tablets with a number of different OS tied to the account with little difficulty in including the Firefox of the previous generation of Linux that has been on the net accountant. The problem is now that on both my computers in the main, a windows 7 and a desktop tablet windows 8.1, both running the latest Firefox, I am unable to find the 'Add a device' button in the synchronization of the management screens. This includes browsers built in display options as well as the Firefox manage account page. The first gives me options to disconnect the account, go to the maintenance screen, several checkboxes that you can synchronize to the device name. The management, after the login screen, don't give me options for the disconnect, change password and delete the account. Any help to understand why the add device button seems to be missing from these two devices would be greatly appreciated.

  Please check the version of your Installation of Firefox. (can be found by clicking on the main menu, or by clicking or hovering the cursor over the help button, and then click about firefox in the submenu). According to since how long you configured synchronization you can still use the old version of sync. Firefox 29 has introduced a new (and I would add a lot less tedious) version of sync. See this Mozilla support article for more information on the upgrade of your sync to the new version.

• No update button

  Airport warn me of an update for time capsule, but there is no update button...?

  Hold down the option key and click on the version, the vehicle's currently on summary page... He should then list the TC available firmware versions available and you can choose it then.

  But some people have problems from a Mac. If you have the ipad or iphone download the iOS version and use it.

  If not, tell us what your problems persist... There is a manual method.

  Re: proxy server annoy 7.6.7 update?

• Why vertical processing "update" button?

  Since the last update when I apply vertical 'level' or 'auto' corrections are average power off. There is an "update" button, and after hitting "update", the correction looks very good. What is the function of this and what I need to "update" images individually? Where can I get the 'auto stand' to go right with a single click?

  Thanks for the help

  

  What is the function of this and what I need to "update" images individually? Where can I get the 'auto stand' to go right with a single click?

  When you paste / sync development settings or create a preset, you can simply apply the vertical Mode (Auto, level, Vertical, etc.) or you can also apply the particular transformation of warping (tilt, rotation, etc.) that has been calculated for the image of the source from which you copied settings.  For example, the copy settings window has these options:

  

  Suppose you apply transform > Auto for a photo and then create settings > copy settings, selecting transformed standing. When you paste the settings to another picture of development, you'll apply Auto mode and the deformations of the particular transformation of the source photo. The update in the transformation Panel button will be active - if you click on it, it will recalculate the parameters of the automatic mode for the current photo.

  If you want to apply the Auto to many photos, make the settings > copy settings and select the vertical Mode only.  Select all the pictures, then make it stick settings.  Similarly for sync settings or set a preset.

• How can I add an existing cfm page to a project?

  CFB3 Question: How can I add an existing cfm page to a project? I created a project and copied a file in the project folder, but I can't seem to find a way to add the cfm file in the project.

  Have you tried to update the display of files?

• Pe11 adds a video (.) MOV) to a project, but a generic error?

  I'm new to elements 11 first and I am trying to add a video (.) MOV) to a project but I get a generic error?  Have tried several times with the same failed result.  Any ideas?

  ElwoodPQuatro

  Please visit the Apple website and install the latest version of QuickTime.

  http://www.Apple.com/QuickTime/Download/

  I installed it on Windows 7 64-bit and 64-bit Windows 8. It's what you want.

  QuickTime is required for your Premiere Elements.

  Get QuickTime installed should clear a lot of problems.

  Make sure that you are set as Run As Administrator or run Premiere Elements from a user with the privileges of the administrator account. Right click on the desktop icon of Premiere Elements, select Run As Administrator.

  After addressing these 2 key points, we'll talk about these .mov with about 5 GB file sizes.

  Thank you. Looks like solvable problems.

  RTA

• How can I add radio buttons to my form?

  How can I add radio buttons to my form?

  An update was released today which includes radio and checkbox button groups.

  Please update to the latest version.

  Thank you

  Sanjit

• Add radio button to each row of an interactive report: possible or not?

  First of all, let me explain what is the point of this application.
  I do an application that allows you to select an item in a drop-down selection list. This list is a list of food categories. Suppose the user selects "Fruit."
  Then the page refreshes and shows an interactive report with a list of foods which belongs to the category of fruit.
  
  This is where I want to change things:
  I want the user to be able to view the interactive report, but in this interactive report, I would like to add a button for each row.
  Then, when a certain type of food is selected (say "Strawberry") via the radio button, a text field should appear under the interactive report. In this textfield, the user can then add the weight of the food, and then it will calculate how many carbs in strawberries there.
  
  All that I really want to know is:*.
  How can I add an option button to each row of the interactive report, and how to bind this option button to the value of that particular line? *
  
  
  
  Additional information:
  The "P17_FOOD_CATEGORY" element contains the following LOV:
  Select FOODCATEGORYNAME as display_value, FOODCATEGORYID as return_value
  of FOODCATEGORY
  order by 1
  
  The 'Food' region contains the following source:
  Select a.FOODID, B.SID, b.FOODCATEGORYNAME, c.STANDARDAMOUNT, c.NAME unit
  food an inner join FOODCATEGORY b
  On a.FOODCATEGORYID = b.FOODCATEGORYID join FOODUNIT c
  On a.FOODID = c.FOODID
  where a.FOODCATEGORYID =: P17_SET_CATEGORY
  
  EDIT:
  PLEASE, I BEG YOU! Even if you don't know an answer, or if you are unsure of your answer, publish! Same suggestions will be welcome! I really need all the help I could get, even if it's not much.
  
  Published by: 917169 on February 29, 2012 12:25

  Hello

  I had the problem, that you have found.

  >
  Error cannot change the interactive report query.
  ORA-12899: value too large for column 'APEX_040100 '. "" "" WWV_FLOW_WORKSHEET_COLUMNS '. "" DB_COLUMN_NAME' (real: 32, maximum: 30)
  >
  you found this problem because the size of this apex_item.radiogroup(1,a.FOODID) is longer than 30 characters, but we have certain restrictions for the column names, we cannot use more than 30 characters for column names, then for what his use of name of column, please see below changed the code.

  select  apex_item.radiogroup(1,a.FOODID) as "FOODID", a.NAME, b.FOODCATEGORYNAME, c.STANDARDAMOUNT, c.NAME Unit
  from FOOD a inner join FOODCATEGORY b
  on a.FOODCATEGORYID = b.FOODCATEGORYID join FOODUNIT c
  on a.FOODID = c.FOODID
  where a.FOODCATEGORYID = :P17_SET_CATEGORY
  

  Hope you help

  Thank you
  Jitendra

• -Automatic update of Folio or update button?

  Hi, I'm looking to see if there is a update button in current version ID.  For some reason, when I save my recent edits they seem to be published.  I can't find the "Refresh" menu drop-down button that I used to see if my memory is good from previous versions.  If the update does not occur automatically when I register, how can I check if this version is available?  That I am consulting the folios on my iPad thanks Adobe Viewer.  I know it shows "update version" sometimes but I'm I just touched by a lag between when I win and he published automatically and when the slip of update is available?  Thank you.  MD

  You must select the item in the folio builder Panel then

  Select Update in the Panel menu.

  Save the file does nothing for the folio.

  Bob