Add vCenter Workflow error: unexpected status code: 404
Hello
I am trying to add a vCenter vRO 7.0.1 host using the plugin existing VC (ver. 6.0.2.3435085) and I run a strange question.
If I choose NO for the option ' will you orchestrate this instance "then the workflow completes successfully. This does allow me to run workflows against the vCenter.
When I remove the existing vCenter and re - run the workflow of vCenter Add, this time by choosing YES, the workflow fails with error validation process: unexpected status code: 404 (Workflow: Add a vCenter server instance / validate (item2) #1)
Any ideas why check YES causes this?
My entries:
Host: fqdn.servername.com
Port: 9443
Path: /sdk
Ignore the Cert: Yes
Thank you.
Hello
This error probably means that the port number is incorrect.
Are you sure 9443 is the correct port number? Usually, the port number is 443, not 9443 (port 9443 is where vSphere Web Client is available). Could you re-run the workflow with port 443?
Tags: VMware
Similar Questions
-
Cannot pair VRMS servers - VRM Server generic error. Unexpected status code: 404
I have been setting up SRM in accordance with the documentation and am at the part where I have a VRM server configured on each side. My next step on the vSphere replication tab is #3 'set up the connection VRMS. When I click on the "Set up the VRMS connection" link I get a dialog box stating: "do you want to configure connection VRMS? I click "Yes" and I get another dialog box stating: "VRM Server generic error. Please see the documentation for troubleshooting information. The detailed exception is: ' unexpected status code: 404'.»
Anyone seen this before? Do you know how to solve?
Thank you
think that it is a known bug that should have been in the "known issues" section of the release notes, but did not for a reason that I'm going to check that out in their own country.
It seems that during the installation of SRM, vCenter was specified by DNS, while during VRMS vCenter configuration was specified by an IP address. These two must match. IE, if you use DNS (FQDN) in one place use it in other institutions. In my setup, I used addresses IP for both entries during the installation process and does not see any problem.
If you don't you remember how you have defined vCenter in the SRM installation screen, then I guess the quickest test is to redeploy and configure devices VRMS and doing the opposite of what you did just that is to say if you just use FQDN in the VRMS screens when he talking about vCenter using the IP address instead and vice versa.
-
Unexpected status code: 503
Hello
try to check the configured NSX clusters, and here is the error:
Manager NSX of error internal. Check if the NSX Manager newspaper for more information or contact your system administrator
Unexpected status code: 503
restarted everything, no luck
Just checking - have you tried to force-reload your browser with the Web Client vSphere? If so, could you try from another browser?
Also, when you say "restart all", does include NSX Manager and vCenter server?
-
Status code: 404 not found
Hello
I created comprehensive simple REST services. It validates the data and send it in a queue. I added a REST Client Add on to my Mozilla browser. I got the following error when I test the full web services rest via customer remains.
- Status Code: 404 Not Found
- Content-Length: 1164
- Content-Type: text/html; charset=UTF-8
- Date: Mon, 08 Jul 2013 16:22:41 GMT
- X-ORACLE-DMS-ECID: a26c3ae948dcd922:28156ab0:13fbd9dc11f:-8000-00000000000001fc
- X-Powered-By: Servlet/2.5 JSP/2.1
<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 project / / BY" > ".
< HTML >
< HEAD >
< TITLE > error 404 - not found < /title >
< / HEAD >
< BODY bgcolor = "white" >
< FONT FACE = Helvetica > < BR CLEAR = all >
< TABLE border = 0 cellspacing = 5 > < TR > < TD > < BR CLEAR = all >
< FONT FACE = "Helvetica" COLOR = "black" SIZE = "3" > < H2 > error 404 - not found < / H2 >
< / POLICE > < table > < /TR >
< /table >
< TABLE border = 0 width = 100% cellpadding = 10 > < TR > < TD VALIGN = top WIDTH = 100% BGCOLOR = white > < FONT FACE = "Courier New" > < FONT FACE = "Helvetica" SIZE = "3" > < H3 > of RFC 2068 < i > Hypertext Transfer Protocol - HTTP/1.1 < /i >: < / H3 >
< / POLICE > < FONT FACE = "Helvetica" SIZE = "3" > < H4 > 10.4.5 404 not found < / H4 >
< / POLICE > < P > < FONT FACE = "Courier New" > server has not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. < /p > < p > if the server does not wish to make this information available to the client, the status code 403 (refused) may be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. < / POLICE > < / p >
< / POLICE > < table > < /TR >
< /table >
< / BODY >
Can someone help me. I was struck here
Thank you
Waly
< / HTML >
Problem has been resolved. There is no tric. My suggestion is before going to test any full service remains on the browser, if we test level console sb at least we can trace the error.
This error can occur if your web service has any problem of syntax or validation problem or condition fault so we can get this problem...
Thank you
Waly
-
Hi all
I use Windows c# client below the version:
Somehow, I had random error / intermittent pop up:
Error: unexpected character "(code 65279 / 0xfeff) in prolog. EXPECTED ' < ' to [line, col {source unknown}]: [1.1]
So I wonder if it is a recent issue with the Windows 10 .NET framework update?
My other client c# version even on Windows Server 2008 R2 is not having the problem.
FYI,.
No need to upgrade to vSphere 6.0 yet. I updated the client vSphere upgrade VCenter server in 5.5U3d the project last week, so far, that's the problem:
See the screenshot above for the stable version.
-
Bad HTTP response returned with status code: 404 at low level sample push inititator
Hello, I have installed low level sample push inititator in my localhost, everything is OK but when I try send a single message push, the server return
"Bad HTTP response with the status code returned: 404."
Can someone help me, please
What is the URL used (Please replace your CPID with ' x)?
-
Chargeback add vcenter SQL error
Hello
I'm trying to adds a server vCenter ChargeBack.
I get the following error message:
The invalid vCenter Server database. The vCenter Server database must have the following views: VPXV_HIST_STAT_DAILY, VPXV_HIST_STAT_WEEKLY, VPXV_HIST_STAT_MONTHLY and VPXV_HIST_STAT_YEARLY
On this post, (https://communities.vmware.com/thread/236730) say that the sql account must be db_owner on the vCenter database, I have that and say that we create the views.
In SQL management Studio, I see these views, but exactly. I have the same names, but like this: VMW. VPXV_HIST_STAT_DAILY, VMW. VPXV_HIST_STAT_WEEKLY...
Is this normal?
Best regards
Hello
I solved my problem.
In fact, I changed the schema (in sql) for the user to sql dbo to MVW vCCM and I can add a vcenter.
-
I get an error HTTP not found-404 on Windows Server 2008.
Original title: test a responder OCSP - HTTP not found
Hello
I've implemented an OCSP responder on a Server 2008 R2 VM. Our issuing CA is Server 2008 R2 VM too.
Status of the OCSP responder is ok. But when I test with the command certutil-url test.cer command, the result shows failed. Network Monitor, it shows the HTTP response, HTTP/1.1, status: not found, URL: / ocsp, status code: 404.
I ran out of any configuration?
Thank you
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information helps.
-
Error code 404 on stubborn workflow first call - IE
Hello everyone
I user JDev Version 11.1.2.3.0
There is a strange situation that I feel right now. I have a bounded task flows in my adfc-config. XML called as an inline-popup. When I call on the application running the popUp appears and it works fine, except on a specific situation. If you use IE (note: I have IE 10), when I call the above mentioned the workflow for the first time (by clicking a menu item) the popUp content is replaced by this message:
Error 404 - not found
Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:
10.4.5 404 not found
Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If I close the popUp and call it once, it works very well, showing the appropriate content. If I navigate to another page, it happens again (first call-> error code 404, following calls-> works very well).
What is the problem? It only happens for IE. On Chrome, Firefox etc. it works fine
Thanks in advance!
FYI, I tried to run my application in 12 c, and it works as it should. Unfortunately go to 12 c at this stage of development would require making too many changes, so I'll look for another way to reach my goal. Thank you for you answer
-
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Original title: REPORTS of ERRORS
I GET THIS MESSAGE EVERYTIME I OPEN MY PC WINDOWS XP SRX114OOO9511 ID. THE PROCESS OF SYSTEM C.------32\SERVICES WINDOWS\SYSTEM. EXE FINISHED IN A WAY UNEXPECTED W; STATUS CODE - 1073741817.THE SYSTEM WILL NOW SHUTDOWN AND RE-STARTED. STOPPING INIATED BY NT AUTHORITY SYSTEM... I'M TRYING TO SOLVE THE PROBLEM BY FOLLOWING THE INSTRUCTIONS OF ERROR REPORTS
Hello
· What are the steps you tried to solve the problem?
· This happens at random, or whenever you open an app?
I suggest you follow the steps mentioned below.
Method 1:
Step 1:
Start in safe mode and check if the problem persists.
a. restart the computer and keep tapping F8 until you reach the start menu.
b. Select safe mode in boot options and press ENTER.
If the issue is not persistent, then perform a clean boot.
Step 2:
To perform a clean boot follow the steps mentioned in the link given below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: Follow the steps to configure Windows to use a Normal startup in step 4 State.
Apart from that, I suggest you follow the steps mentioned by Non-XP-Prof in the link mentioned below.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Return 200 status Code error handler
Greetings,
I have a section of my site assigned to be a "Error Handler", but when a user is brought to this page, the status code is a 200. As you can imagine, this has the potential to cause a lot of problems for processes that are based on work status codes.
I found the following solution on another site, indicating to put that code Idoc Script at the top of the Page Template:
<!-$setValue ("#local", "ssChangeHTTPHeader", "true") - >
Unfortunately, doing the above does not work. Am I missing something?
Any help is appreciated. Thank you!
Josh
I'm sure there's an easy solution here, but I can't find it on my box.
Using Apache as a front end? They you could use mod_rewrite to redirect to a 404 page if a specific header exists in the answer. If you could put this on your error page:
And then you have this in your Apache config file:
RewriteCond% {HTTP:HTTP_FOUR_OH_FOURED}
RewriteRule. * /not/ - found.htm [R = 404, L]
More available here:
-
Internal error trying to add vCenter Orchestrator Endpoint
Hi team,
I am trying to configure vCAC 6.0 using the inbult Orchestrator 5.5.1 However when I try to add the vCO by accessing Home > Administration > Services Advacned > endpoints and click on the + adds vCenter Orchestrator plug-ins such as endpoints so that you can create service plans with Advanced Services Designer and publish the workflow as catalog items. I get the following error:
Internal error
An internal error has occurred. If the problem persists, contact your system administrator.
When you contact your system administrator, use this reference: d6c92026I tried to connect to vCO by using the following accounts, but this has not helped to solve the problem:
It seems to me that the error is always flagged only when I try to run the task above. Can someone please help me solve this problem?
Thank you
Arun-
http://highoncloud.blogspot.in/
Virtualization VMware on NetApp
8281 is the correct port. Probably, you must use Basic authentication and insert the credentials of the user that you use to sign in to the vCO client.
-
Someone at - it successfully converted NetBSD? Thank you.
Need to VMWARE Converter: Support for NetBSD 3.0 and later, please. I get the below error
VMware Converter Standalone GUI show me this message: failed to query the source of linux computer
= vmware-converter-worker - 5.log =.
[#3] [2011-02-02 09:23:15.300 03084 info "App"] Results of the query to the host 172.30.2.48
[#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] while trying to run "C:\Program VMware vCenter Converter Standalone\plink.exe - noprompt - stdin - Pei 22 [email protected] cd nokeycheck /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/;.» "/ vmware-sysinfo - lin32.sh" received the error code (2) result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected
[#3]
[#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] received an error code (2) of the ssh client which is dealt with later
[#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] vmware-sysinfo execution failed; return code: 2; result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected
[#3]
[#3] [2011-02-02 09:23:20.494 03084 error "App"] [Converter Agent SysinfoQuery] Query(): Took exception, cleanup before you bail out ([converter Agent SysinfoQuery] implementation of vmware-sysinfo failed; return code: 2; result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected)
[#3] )
[#3] [2011-02-02 09:23:21.296 03084 error "App"] [Converter Agent SysinfoQuery] while trying to run "C:\Program VMware vCenter Converter Standalone\plink.exe - noprompt - stdin - Pei 22 [email protected] cat /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/vmware-sysinfo.log nokeycheck" received the error code (1) result: Cat: /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/vmware-sysinfo.log: no such file or directory
[#3]
[#3] [2011-02-02 09:23:21.296 03084 error "App"] [Converter Agent SysinfoQuery] received an error code (1) of the ssh client which is dealt with later
[#3] [2011-02-02 09:23:21.296 03084 error "App"] Converter SysinfoQuery the Agent failed to retrieve the log file. return code: 1; result: Cat: /tmp/.vmware-sysinfo-udhrkaaejqfyrfgf/vmware-sysinfo.log: no such file or directory
[#3]
[#3] [2011-02-02 09:23:21.998 03084 error "App"] SysInfo query failed with error [converter Agent SysinfoQuery] implementation of vmware-sysinfo failed; return code: 2; result:. / vmware-sysinfo-lin32: 1: syntax error: "(" unexpected
[#3]
[#3] [2011-02-02 09:23:21.998 03084 info "App"] Programmed timer cancelled, succeeds StopKeepAlive
[#3] [2011-02-02 09:23:32.240 04928 info "App"] [Converter.Worker.DiagnosticManagerImpl] build LogBundle.You are using a generic NetBSD kernel?
so I think that it is similar to the Open and FreeBSD.
hotclone is the waste of time - it won't work.
Use Coldclone - or dd the entire disk - write a descriptor for him then and use it as vmdk.
In the other BSD systems I boot first time in single user mode - as everything else probably does not work.
Can I fix fstab and etc/rc.conf if necessaryI'm in a hurry - if you need details for dd-road let me know and I explain a bit...
Ulli
-
I have Windows XP. I can not access FF. When I do I get error code 404 and the message "URL/firefox is not found on this server." It started today, I had version 9 ff. I've uninstalled and reinstalled version 12, but still not same error when you try to access the FF.
PS: Other browsers work fineTry to open Firefox and Google by typing in the address bar at top and press on enter... If it works, I'd say something happened to your homepage settings and try this: How to set the home page
Maybe you are looking for
-
When I go to Options on the Advanced tab, there is no encryption between update tab and certificates. How would access the encryption info?
-
point of cohesion def type strict
Hello Can someone tell me why the cohesion appears on the indicator of "Orders table 2? I was going through the development of the CLD and tried to make a cluster based on the indicator of orders on Array (my attempt is data Cluster_1.ctl). The upp
-
Cannot install windows updates and updates history screen is empty.
I can't install the windows updates. I have Windows Vista Home Premium. My automatic update is running... I studied and thought that the problem was with some service pack 2 I had to install - I did and nothing helped. My windows update history page
-
The game installed, but has not executed because the graphics card is less than min. plug. What should I do?
-
Strange to sleep with HP Pavilion Elite e9270f problem
I have a HP Pavilion Elite e9270f running Windows 7. I have a strange problem sleep/hibernation began about two months ago, which makes me a little nuts. I usually select sleep in the Windows menu when I want to put the computer in mode 'sleep'. I