Adding a graphic button in a widget accordion instead of using just the text?

Similar Questions

• What widget of composition is used in the model home under lists?

  I try to recreate the composition of lists used in the model home, but do not know which one to use or how to set up

  Replied to your previous post.

  Thank you

  Sanjit

• Dynamic Actions disable button based on the text field

  Hello

  Sorry if this has already been asked but I checked and could not find a job.

  «I'm trying to disable / enable a button "view" among the elements of this region from if a text field has a value or.»  I created a dynamic action for this but its not working only partially.  I can get the button to be disabled or enabled when I leave the text field, but what I'm trying to do is to get the State of button to change as soon as I start to type in the text field or return to people with disabilities if the text is deleted.

  I don't know that I'm missing something simple and help you can give is greatly appreciated.

  I use APEX 4.1 and that's how I got the dynamic action implementation, I tried different but no event types to give them action I want.

  I also install an example (details below)

  Event - change

  Selection type - point

  Article (s) - P1_TEXT

  Condition - is null

  Real Action

  Action - disable

  Fires when the result of the event is - real

  Fire on the loading of the Page - Y

  Items affected - button

  Article (s) - P1_BUTTON

  Action of false

  Action - Enable

  Fires when the result of the event is - fake

  Fire on the loading of the Page - Y

  Items affected - button

  Article (s) - P1_BUTTON

  workspace - show_issue

  user_name - show_issue

  password - show_issue

  app_id - 61707

  http://Apex.Oracle.com/pls/Apex/f?p=61707:1

  It works as expected if you change the event of 'Change' for 'key version?

• Change the color of the text to the previous button when you click on a button

  Hi all

  If I said 7 buttons, each with text that changes color on turnover by using 'Up' 'Over' and 'Down' of the keyframes in the timeline buttons.  Is there a simple way to get the text of the button changes color when you click on it, stay that way, and then back to the original color once one of the other 6 buttons are engaged?

  The only thing I can get to prepare code pages for each button that changes the color of every other button regardless of whether it was active.

  See the code example would help a lot!

  Thank you!

  use:

  var previouslyClickedBtn:MovieClip
  var buttonA:Array = [content_mc.work_btn, next button and the rest of your buttons];
  var targetA:Array = [work_mc, etc.];

  for (var i: uint = 0; i<>
  .Ivar Button [i] = i;
  buttonA [i] .addEventListener (MouseEvent.CLICK, clickF);
  buttonA [i] .addEventListener (MouseEvent.MOUSE_OVER, overF);
  buttonA [i] .addEventListener (MouseEvent.MOUSE_OVER, overF);
  }

  function workOver(e:MouseEvent):void {}
  e.currentTarget.gotoAndStop ("over");
  }

  function workClick(e:MouseEvent):void {}

  {if(previouslyClickedBtn!=null)}

  previouslyClickedBtn.gotoAndStop ("up");

  }

  e.currentTarget.gotoAndStop ("down");

  previouslyClickedBtn = e.currentTarget;

  targetA [e.currentTarget.ivar] .gotoAndPlay ("enter");
  }

  function workOut(e:MouseEvent):void {}
  content_mc.work_btn.gotoAndStop ("up");
  }

• HP Pavilion G6-1242ee: Configure switchable graphics button is missing!

  Hello.

  I went to my device manager and click with the right button on my graphics card to day. The update succeeded without any problem.

  2 pilots that I displayed view:

  AMD Radeon HD 6470 M and Intel HD graphics Family.

  These are the drivers that I have had since I have this pc.

  For some reason any after I rebooted my pc (to complete the update), I could see no longer the switchable graphic button to set up, and when I click on my AMD control center button, I get an error saying: Catalyst Control Center Host has stopped working.

  Help, please!

  Thanks for the reply, I solved the problem by updating manually to the latest drivers for my card now, the button is back, as well as the control center.

• Remove the spacing between the buttons of Menu Widget - Muse CC 2015

  Hello

  I seem to have found a slight problem with deletion of the spacing or gutters between the buttons of menu widget.
  I add a widget menu at design time either horizontal or a vertical menu.
  Remove the border of each button and then I'm going to change the gutters to put the buttons close together so that there is no space between them, but the parameters and the values of gutter do not allow me.

  

  For some reason any gutter V is always grayed out and cannot be changed and the gutter H is set to zero, but there is still a gap between the buttons horizontally

  Is there a way to remove Vertical and Horizontal gutter now?

  Right then I was told that I'm going about this all wrong.

  What I do is not use the menu button and try to change the values of the gutter, but instead, I have to select the menu it self and then change the values of the gutter.
  I think it's the same for the kids meals don't click the button but select the menu rather than change the gutter to zero values.

• Help with the status button widget – I want the button to be transparent, but not the text!

  Basically I have a few images which passed hovered, I you want to lighten and text to appear (it's for a portfolio, so I want the title of the project and a very brief description appear when each image is hovered over). To do this, I had to use the status button widget and set its real part of white button, opacity of 50%, while the image lightens when hovered over. However when I do this the text reduced to an opacity of 50%, but when I select the bit of the text itself, he always says 100% opacity. I need the text to be 100% opacity and non-transparent so it can be easily read.

  Looks like you apply opacity to all button instead of simply filling. When you set the opacity? You should be setting the opacity of the background of the button by using the opacity of fill not the opacity of the effects...

  

• How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

  How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

  Like I can't pin, I keep it at the top of the page with scroll effect 0.

  It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

  Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

• In Muse, is it possible to do a status button opens a menu accordion?

  I am building a phone version and I want a button to open the menu accordion that I put in the header.

  Please see this:

  https://www.YouTube.com/watch?v=Thm8bsNccvI

  https://www.YouTube.com/watch?v=dQy_lj0ZXss

  Thank you

  Sanjit

• Problem adding Interaction to button

  I hope someone can help, I just mocked to the top of my first site Catalyst 5.5

  I have composed the buttons, added images to my different States and I'm ready to make the site work.

  Unfortunately catalyst is not let me create an interaction.

  I noticed that on some tutorials, it says choose 'State' rather than 'Target' - I do not know where to change this (would even help!)

  I've only been able to create a link to a URL in the "interaction" section, what I really want, it's for my buttons to work so I can navigate through the States (pages)

  Kind regards

  Matt Thame

  In Flash Catalyst 5.5, you must change the menu choose target for the Application, and then the next drop-down list to fill with the names of State, select the State you want and click OK. You can control when this happens by using the menu of any State when it is also. This menu lets automatically restrict you the State in which it operates in.

  Hope this helps

  Chris

• HP Pavilion a6000n desktop: adding false graphic RAM and freezes start.

  Well, I'm back with the same machine as the previous assignments.  I ordered the recovery of Surgeons of the computer disks and that they were unnecessary because the computer does not see any cd/dvd I have to install.  Finally gave up and ordered a Windows Vista recovery usb flash drive and installed the operating system.  I used it very well with the RAM minimum (1 GB).  I decided to upgrade the memory to use all 4 GB.  All four are recognized in the BIOS/Setup with the full 4 GB dispalyed.  The new brand of memory is Samsung.  Everything seems to be as it should.

  Here's the problem: the Windows splash screen appears with the scan progress bar and when it gets to the sixth pass it freezes as black and alternating vertical lines distorted graph color vertical lines appear.  It will remain so until I have shut down, because he has not answered all the keyboard commands.

  I removed two 1 GB modules and restarted without problem.  I've tried three, and he did nothing.  Swapped the output for the two 1gbs modules, I removed and they worked perfectly.  With four on board is the problem presented and only when windows is loading.

  I also tried safe mode.  All four ram modules work with the VGA drivers in safe mode without graphical distortions or freezes.

  I tried to restore the computer to an earlier time with the console of Windows Vista repair because he found from the problems and suggested this course of action.  When I did, he removed my Firefox browser.

  Has anyone seen this problem before or a solution?  Thank you for help.

  What follows is my computer information system:

  Name of the Microsoft® Windows Vista™ Home Premium operating system
  Version 6.0.6002 Service Pack 2 Build 6002
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer HP-Pavilion
  System model RX885AA-ABA a6000n
  System Type X 86-based PC
  Processor AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2200 Mhz, 2 Lossnay, 2 logical processors
  Version/Date Phoenix Technologies, LTD 5.13, 29/10/2007 BIOS
  SMBIOS Version 2.4
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.0.6002.18005".
  Username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 2.00 GB
  1.87 GB total physical memory
  Available physical memory 775 MB
  Total virtual memory 3.99 GB
  2.49 GB available virtual memory
  Page file space 2.17 GB
  Paging file C:\pagefile.sys

  HP Pavilion a6000n specifications

  Before that I inform you of why 4 GB will not work, I will inform you of the steps, I took in coming to my conclusion.

  First of all, I found an old PCI VGA card and installed.  Then I started the installer and changed to display pci dashboard.  F10 save and exit.  I left Vista find the new hardware and drivers.  Power off and swapped the cable from the monitor with pci card.  Restarted.  Last good known Configuration.  Made to the desktop with large icons, display etc.  Power off.  Installed all four modules of memory of 1 GB.  The installer confirms the mms of 1 GB in all four banks.  Save and exit.  A frozen fourth passage on the starting Windows progress bar screen.  Display is now less than a hundred multicolored pixels (it looks like stars in the night sky) scattered across the screen with barely perceptible ms inside progress bar.  Killed power as no response to input devices.  Modules removed from DIMM0 DIMM2 (banks 1 and 3) and installed two 512 MB mms instead.  Power, entered installation.  Confirmed 1 GB, 512MB, 1 GB, 512MB in DIMM0-4 (banks 1-4).  Save and exit.

  Eureka!  Starts directly on the desktop with no complications.  Vista even automatically the Resolution 1600 x 900 display value.

  Power off.  Remove the PCI card.  Has changed from the monitor to the integrated connector cable.  Powered on the Setup where I changed the display on board.  Saved and get out.  Straight to the desktop.  All right.  Vista indicates on the installed 3,072 GB 3.0 GB.

  I had read a useless article on the HP Forum that said that HP had made disappear the memory alternative banks.  Thank you for that.  Thanks kaoutar to straighten me out on this.

  After studying the limits of memory on Windows os systems, I made a discovery.  Due to the limitations of physical or software address, Vista cannot use 4 GB RAM in the 32-bit operating system.  You must install os 64 bit where it can use 8 GB to 16 GB.

  Here are a few discussions of support, I found to cooberate my conclusion that 4 GB will not work on this computer, as this is with Vista 32 bit installed.

  Thanks for the reply and assistance Erico.  Installation of Bank alternation of RAM modules corresponding coupled to the reduction of two of these 512 MB back is the solution.  It was an error of installation of equipment so many restrictions imposed by hardware and software manufacturers.  If I or anyone else, wants more RAM under Vista or 7, will need the 64-bit versions.

• Adding a graphic or a photo behind a block of text in InDesign CS

  Hello world

  I hope I can get help please on a problem I have. I'm without QuarkxPress to InDesign CS - after having for nearly six years! -thought it was time learn InDesign. So far, I really like it. But, I discovered a small problem I have encountered with Quark, but I'll have this with InDesign. I placed a vector image separately behind a block of text in title (also tried a photo). For some reason, the vector graphic completely covers the title text. I tried to 'put in the background,' which did not work, he was still covering the text. I made sure that there no fill color at all. I even tried to put the image on a separate layer 'behind' the title text and it still doesn't work. Could someone help me please. I would be so happy.

  Extract

  Two possibilities. The text is on a lower layer (which you say you checked) or you have applied to the cover image.

  Either disable it or select the text block, right click and select text properties of the frame, and then select ignore skin.

  Bob

• Change the color of the text on the button click

  Hi, how I would change the text with color while the application is running?

  For example, when the user clicks a button, how can I change the color of the editfield with already inserted text?

  I realize that I could add the editifled with different colors, but I was wondering if there is a way to do this without adding new editfield - like refreshing the editfield with different text color.

  Help is very appreciated!

  First, create your own custom class that extends EditField.

  It can be as simple as this:

  public class MyEditField extends EditField {
    private int _color = Color.BLACK;
  
    public void setFontColor(int color) {
      _color = color;
      invalidate();
    }
  
    protected void paint(Graphics g) {
      int prevColor = g.getColor();
      g.setColor(_color);
      super.paint(g);
      g.setColor(prevColor);
    }
  }
  

  Once you have this class, you can use it like this:

  final MyEditField textEntryArea = new MyEditField(...); // any EditField constructor can be used
  
  ...
  FieldChangeListener buttonListener = new FieldChangeListener() {
    public void fieldChanged(Field field, int context) {
      if (field == setToRedButton) {
        textEntryArea.setFontColor(Color.RED);
      } else if (field == setToBlueButton) {
        textEntryArea.setFontColor(Color.BLUE);
      }
      // etc.
    }
  };
  ...
  setToRedButton.setChangeListener(buttonListener);
  setToBlueButton.setChangeListener(buttonListener);
  ...
  

  Edit: fixed a few typos.

• Removing the widget breaks ability to paw through the elements

  I inherited a project of Captivate that I have to go back and to make changes to make it compatible 508 (aka accessible for people with hearing, sight, etc.).  One of the biggest complaints we have received has been the fact that there is no way to control the volume, I went and added the volume slider widget to the master slide.

  This worked well, until we learned that the volume slider widget was not accessible to the screen reader software and we need another solution.  So, I removed the slider and added two forms intelligent to act as volume up/down buttons.  Unfortunately, apparently intelligent forms are also not accessible to the screen reader, and worse, it is that remove the volume slider appears to break the ability to paw through non-interactive elements of the slides - a key component of accessibility.

  Add the cursor backwards seems to fix things, but it is a really weird problem, and I don't want to be locked in to what this cursor, because it is not 508 accessible.  Anyone know how I could take to remove without breaking the rest of the project?  And, more important still, you know anyway to add the volume control which is 508 compliant?

  I think that your customer could be "by drawing a long bow" suggest that their definition of control means that you also have the volume of the audio controlled in e-learning rather than, as you noted, allowing just the audio volume is controlled by the device or the PC on which it is displayed.

  I tend to feel that more designers of e-learning would be thinking "control" of the media includes the option to start playback, pause, resume, etc..  Otherwise, no control also be analyze as meaning keyboard actions should also be able to change the height, width, image format, brightness, color, etc. etc.  Where is the limit?

  At any given time you draw a line so DEFINE what control actually includes or does NOT include.

  I have personally seen no reference in 508 documents related to e-learning which says, it must include the ability to control the volume.  That's why I asked for a referral link, just in case it is now required some changes to the laws.

  I would like to push back on this one.  Customers can not always get what they want just because they ask for it.

• QuickTime buttons disappeared, but they work as 'normal', you just can't see them

  Recently, I downloaded a video to be used for the children of education, since a reputable site which I've used several times and never had any problems with (like others), but when I went to play the video all the quicktime control buttons had disappeared. All that is visible on the Quicktime control bar is the level of volume slide control & video progress 'bar' & time (I've added a screenshot). Now, the same thing happens with all my videos.

  All the buttons still work fine. Thus, for example, if I click where the key play would be, etc. the video will play & operate as 'normal' except just, you don't see the buttons.

  

  I don't know what happened, as far as I know that I have not adjusted or tampered with settings or preferences, and everything was fine until I downloaded this video (although this would be just a coincidence)

  I have a MacBook Pro (13 inch, mid-2012), running OS X El Capitan 10.11.5

  help would be appreciated because it is boring and I can't just uninstall and reinstall as its now at part of the OS X

  Have you ever tried to restart the Mac?

  You can also try a startup by pressing the SHIFT key while starting the computer. Secure boot performs tests and cleaning, is much slower than the normal startup. Give him time. The desktop appears, you can restart the Mac normally.