HP Pavilion a6000n desktop: adding false graphic RAM and freezes start.

Well, I'm back with the same machine as the previous assignments.  I ordered the recovery of Surgeons of the computer disks and that they were unnecessary because the computer does not see any cd/dvd I have to install.  Finally gave up and ordered a Windows Vista recovery usb flash drive and installed the operating system.  I used it very well with the RAM minimum (1 GB).  I decided to upgrade the memory to use all 4 GB.  All four are recognized in the BIOS/Setup with the full 4 GB dispalyed.  The new brand of memory is Samsung.  Everything seems to be as it should.

Here's the problem: the Windows splash screen appears with the scan progress bar and when it gets to the sixth pass it freezes as black and alternating vertical lines distorted graph color vertical lines appear.  It will remain so until I have shut down, because he has not answered all the keyboard commands.

I removed two 1 GB modules and restarted without problem.  I've tried three, and he did nothing.  Swapped the output for the two 1gbs modules, I removed and they worked perfectly.  With four on board is the problem presented and only when windows is loading.

I also tried safe mode.  All four ram modules work with the VGA drivers in safe mode without graphical distortions or freezes.

I tried to restore the computer to an earlier time with the console of Windows Vista repair because he found from the problems and suggested this course of action.  When I did, he removed my Firefox browser.

Has anyone seen this problem before or a solution?  Thank you for help.

What follows is my computer information system:

Name of the Microsoft® Windows Vista™ Home Premium operating system
Version 6.0.6002 Service Pack 2 Build 6002
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
Name of the system
System manufacturer HP-Pavilion
System model RX885AA-ABA a6000n
System Type X 86-based PC
Processor AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2200 Mhz, 2 Lossnay, 2 logical processors
Version/Date Phoenix Technologies, LTD 5.13, 29/10/2007 BIOS
SMBIOS Version 2.4
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.0.6002.18005".
Username
Daylight saving time from the centre of zone
Physical memory (RAM) installed 2.00 GB
1.87 GB total physical memory
Available physical memory 775 MB
Total virtual memory 3.99 GB
2.49 GB available virtual memory
Page file space 2.17 GB
Paging file C:\pagefile.sys

HP Pavilion a6000n specifications

Before that I inform you of why 4 GB will not work, I will inform you of the steps, I took in coming to my conclusion.

First of all, I found an old PCI VGA card and installed.  Then I started the installer and changed to display pci dashboard.  F10 save and exit.  I left Vista find the new hardware and drivers.  Power off and swapped the cable from the monitor with pci card.  Restarted.  Last good known Configuration.  Made to the desktop with large icons, display etc.  Power off.  Installed all four modules of memory of 1 GB.  The installer confirms the mms of 1 GB in all four banks.  Save and exit.  A frozen fourth passage on the starting Windows progress bar screen.  Display is now less than a hundred multicolored pixels (it looks like stars in the night sky) scattered across the screen with barely perceptible ms inside progress bar.  Killed power as no response to input devices.  Modules removed from DIMM0 DIMM2 (banks 1 and 3) and installed two 512 MB mms instead.  Power, entered installation.  Confirmed 1 GB, 512MB, 1 GB, 512MB in DIMM0-4 (banks 1-4).  Save and exit.

Eureka!  Starts directly on the desktop with no complications.  Vista even automatically the Resolution 1600 x 900 display value.

Power off.  Remove the PCI card.  Has changed from the monitor to the integrated connector cable.  Powered on the Setup where I changed the display on board.  Saved and get out.  Straight to the desktop.  All right.  Vista indicates on the installed 3,072 GB 3.0 GB.

I had read a useless article on the HP Forum that said that HP had made disappear the memory alternative banks.  Thank you for that.  Thanks kaoutar to straighten me out on this.

After studying the limits of memory on Windows os systems, I made a discovery.  Due to the limitations of physical or software address, Vista cannot use 4 GB RAM in the 32-bit operating system.  You must install os 64 bit where it can use 8 GB to 16 GB.

Here are a few discussions of support, I found to cooberate my conclusion that 4 GB will not work on this computer, as this is with Vista 32 bit installed.

Thanks for the reply and assistance EricoInstallation of Bank alternation of RAM modules corresponding coupled to the reduction of two of these 512 MB back is the solution.  It was an error of installation of equipment so many restrictions imposed by hardware and software manufacturers.  If I or anyone else, wants more RAM under Vista or 7, will need the 64-bit versions.

Tags: HP Desktops

Similar Questions

  • HP Pavilion dv6 5CH1342RW4: maximum capacity of RAM and GPU compatible

    I have a HP Pavilion dv6 5CH1342RW4 laptop computer Intel Core i7-2670QM CPU @ 2.20 GHz.

    What is the maximum RAM of my laptop? It came with 6 GB (2 GB SODIMM ELPIDA 1333 MHz
    4 GB SODIMM Micron), now I want to upgrade.  It will be up to 8GB, 16 GB, or even?

    And on my his AMD Radeon HD M 7400 gpu. I would also like to update in a more advanced gpu. What are the compatible gpu for my laptop?

    Hope to here from you soon guys. Thank you!

    8 GB (2 x 4 GB modules) is your maximum memory and there is no way to upgrade the GPU. It is soldered to the motherboard and cannot be removed or replaced. The numbers you supply are not portable or product model number we would need for more specific information. There may be another motherboard that you could install which would have slightly better graphics, but it would be, at best, a slight improvement for a significant cost and hassle.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP Pavilion 15 ab210tx: ab210tx HP Pavilion 15-how many slots of ram and maximum ram support?

    How many ram slots is available for this model? What is the maximum ram supported by this model?

    in the specifications, it is mentioned as 1X8Gb but no information on the slots and put upgraded ram

    @sekharece

    Slots MemoryTwo SODIMM - NO client available / expandable
    Twin DDR3L-1600 memory support

    Supports up to 16 GB of RAM in the following configurations:

    16384 MB total system memory (8192 × 2)

    12288 MB total system memory (8192 × 1) + (4096 × 1)

    8192 MB total system memory (8192 × 1.) or (4096 x 2)

    Memory system total 6144 MB (4096 x 1) + (2 048 × 1)

    Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)

    Your Service Guide here.

    http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/8499306/model/8818875/manuals

    REO

  • HP Pavilion x 360-11-n032nw: replacement RAM and HARD drive

    Hello

    I just want to replace

    -HDD at 7200 RPM

    -RAM for 1x8GB

    I can't find any specific info

    -If 8 GB works on this motherboard, or if she is DDR3/DDR3L (eg. L DDR3 KINGSTON 8 GB 1600 MHz CL11 SODIMM PC3-12800 is ok?)

    -where can I find HARD drive for this model adapter

    Could someone help me with this?

    See you soon

    Here is your manual that answers all your questions:

    Manual

    A single module of 8 GB of DDR3L-1600 will work and will downclock at 1333.

    Hard disk hardware Kit, number of spare 755740-001, includes support for hard disk, hard drive connection cable and screws.

    $57 HP kit

    This service model is not very easy and compromise security.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • M9452p Pavilion lock, restart the HP splash screen and freezes

    My HP Pavillion M9452p primer, I can connect and I ran a program to copy a disc.  the system froze, then went through the process of restarting and froze on the splash screen for HP.  Rebooted the system by closing doen ran diagnotics and received a message "BIOS4 Boot error, contact the HP support" what dio I need to do to fix this?

    Tried system restore and system recovery using the F8 key start, but he did not, it ran very slow and then rebooted to start HP with the F10, Esc, F9 and F11 options and froze both times.

    I just replace the HD two months ago, and it works very well. I just removed all the component and repluged everythignback to gether, ran diagnotics and everything that happened, but still have the same problem with freezing and restarting the HP splash screen.

    Motherboard?

    Mounted with different lock forum, freezing, etc.

  • My HP Pavilion a6000n cpu upgrade

    I got this hp Pavilion a6000n friend and I basically rebuilt this computer, but I'm not sure what CPU I can go to. I've been watching this cpu for my computer. I am running windows 7 64 bit. This upgrade of the processor is possible for my computer?

    Edit: I also watched this cpu, if the other cpu is too powerful.

    Here are the specifications of your HP Pavilion a6000n desktop computer and its card mother M2N68 - LA (narrated). Based on these specifications, this model supports the following processors;

    Type of socket: AM2
    TDP: 89 watt
    Athlon 64 X 2 with Dual Core technology up to 5600 + (up to 89 watt)
    Athlon 64 4000 + less than
    Sempron less than 4000 +.

    Neither the processors you listed works on this computer.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HP Pavilion a6000n Phoenix Bios

    My 03/2007 Phoenix Bios is corrupted.

    My computer model: a600

    Product: rx885aa

    Manufacturer: ASUS

    name of the motherboard: M2N68 - LA

    Name card mother HP: narrated - GL8E

    Chip set: GeForce 6150SE apply 430

    Operating system: Windows Vista

    I asked the website of HP support for a download of the Phoenix bios, but wasn't able to find a download link.  Anyone know how I can get the Phoenix bios and provide a link for download.   Or is there a way someone can provide me with the bios, if they have it?  I need to Flash my bios with the original Phoenix bios with purchase of HP Pavilion a6000n desktop.  Any help will be greatly appreciated.

    The bios updated to the a6000n HP is available since 09/2007.  Since then, there must be dozens of people who made the update to the bios and have fried their PC. You'd think with so many people having problems, HP fired the update of the bios on his website... or at least to give some sort of warning.  I can see why HP has let the update of the bios in place however.  Those who have made the update and fried their PC still needs access to the exe file posted to extract the ROM to Flash their bios corrupt 513...

    In the interest of those who have the misfortune to do the update of the bios and the frying of their PC, take heart that their PC can be fixed.  I won't be able to make myself the fix until I have access to another PC.  But I'm pretty confident that the fix will work, because it has worked for others with the same HP computer.  The solution to the problem can be found in the material category of this forum under the thread "HP #a6000n bios checksum error after update bios.  It's a pain in buttocks for manually flashing bios corrupted, but it will be well worth the effort to get your PC up and running again.

    Just shame on HP for show lack of interest to its customers.

  • HP Pavilion A6000N Panel before wiring diagram

    I was fixing a friend out of warranty HP Pavilion A6000N desktop and had to replace the motherboard. I installed the Asus M2N68-AM Plus mobo which is very similar to the Council of M2N68 - LA used in the original. Only problem is that I still was able to find a diagram pinout for the reader of card usb/audio/power front panel so that I can return his pc to him. Any help with this would be greatly appreciated that I tried to stick to the closer the original as humaly possible specifications.

    Here is a link to the zipped Manual:

    http://freemanualonline.blogspot.com/2011/03/ASUS-M2N68-am-plus-manual-user-guide.html

  • Upgrade of RAM and Intel graphics

    Hello
    I recently discovered that I could improve my graphics ram and intel. So I went to the performance and tools tgen relize my rankings are not the base score is 4.6 and gamming is 5.2 so you have any recommendations on new graphics for 32-bit operating system and then I put my ram from 4 GB to more than that.

    Hello

    First, your machine is running 32-bit, the RAM upgrade anything more than 4 GB is wasting money because the 32 bit OS can not access to more than 4 Gb. Second, you cannot upgrade the Intel video chip, it is soldered to the motherboard.

    Kind regards.

  • Upgrade graphics card for HP Pavilion A6720Y desktop computer

    I have the HP Pavilion A670Y desktop computer and was thinking of upgrading the graphics card GeForce 9100 integrated to a Radeon HD5850 and adding a new power which would allow this change. Power side is there a reason that my office would not be able to support the Radeon HD5850?

    It's your motherboard.  Make sure that the slot next to the PCI-E x 16 card is open as 5850 is a wide double card.  Your PC has only a 300 watt PSU so 5850 is only in need of a much larger power supply.  Look at the 12 + rating required by the 5850 and then choose the new modular power supply.  Buy not only on power alone.

    Your PC has a practice of small Tower and the 5850 will consume more power (wattage) compared to your existing integrated video processor which means more heat. Be prepared to deal with this issue.  The 5850 is perhaps too card for your PC.

    Don't forget that your PC system BIOS is up to date.

    Open your Pc and clean all the dust. Then a measure of your current diet and buy one that is modular with almost the same dimensions.  Then measure around the PCI-E x 16 slot to make sure that the card fits.

    Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

    How to replace a power supply.

    How to replace a video card.

  • A new graphics card for HP Pavilion a6057c desktop PC

    Hello
    I was wondering if I can get recommendations for a game for my HP Pavilion a6057c desktop PC graphics card.

    Hello

    A video card decent for the games will require a bigger power supply in your PC.  Go with a level of high level video wouldn't do justice to your PC based on its current level of performance of the components.

    TheCorsair CX 500is on sale for $45 after rebate.

    This GTX 460 768 MBis on sale for $95 after rebate.  This GTX 550 TI 1 GB$129 after rebate.  The adjacent slot on the slot PCI-E x 16 in your PC must be vacant.  Review thePresentation of the motherboardof your PC.  Are both video cards NVIDIA 8.25 "long so do some measurement inside your PC to be sure that the video card will fit.

    Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

    How to replace a power supply.

    How to replace a video card.

    Shop around and know what the return policy is before you buy.

  • Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

    Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

    So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

    So first thing, I would like to replace:

    Replace the 2 x 2 GB ram cards default with:

    4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

    For a total of ram 16 GB with my x 64 bit PC of course

    Link: http://AMZN.to/KtMt9m (note that I buy two)

    Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

    1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

    For the graphics card + overclocking.

    Link: http://AMZN.to/IkLTdp 

    Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

    1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

    If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

    Link: http://AMZN.to/IFiEa2

    I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

    -----------------------------------------------

    Card not present upgraded

    HP Pavilion p6510f PC / Nr WW639AA #ABA

    Four cores AMD Athlon 630

    4 GB Ram DDR3

    HARD DRIVE 750 GB

    Integrated ATI Radeon graphics card...

    Power Max Power 250W

    Windows 7 Home Premium 64-bit

    -----------------------------------------------

    Thank you! ~ Of Amerindian

    Hello

    According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

    You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

    You should be able to make your own decision on whether to roll the dice.

  • Adding features USB 3.0 for a HP Pavilion p6235uk desktop pc

    Hello world. I have a HP pavilion p6235 desktop PC uk. The OS is Windows 7 Home Premium.

    These are the MS-7613 (indio) anMS1 motherboard with a PC1 expressx 16 slot for graphics card, three PC1 express x 1 slots and location minicards.

    I don't know if the PC1 express x 1 slots are empty. This pc model has only USB 2.0 ports, but I would buy a USB 3.0 external hard drive to store an image of the computer system and regularly back up the existing files.

    I know that due to backwards compatibility I can plug USB 3.0 drive into a USB 2.0 on the PC. But then I get the speed available with USB 3.0.

    For that I need to install the hardware on the PC. I know that this will include a 3.0 PC1 USB expansion card, I think it is called. But it may be that I will need other elements, except that I don't know what they are.

    It depends on the PC, but this is as far as I know. I read that sometimes what we call a Molex plug is necessary, but now I've really exhausted my store of knowledge.

    Can someone help me? Thank you very much.

    Laurencewithau

    Hi laurencewithau,

    Right, you can use any of four unused pins connector. Or, if you have no connector four unused pins available, you can buy a splitter. Unplug the connector to four used pins and place the splitter on the connector. You will now be able to set a single branch of the four-pin connector to its original location and have an extra unused connector available to power the USB card.

    Molex:

    Molex Splitter:

    Jaco

  • HP Pavilion p6520y desktop PC: need help to upgrade my ram

    I have a HP Pavilion p6520y Desktop PC model #: WW636AA with a FOXCONN 2 92 motherboard, AMD 785 G Chipset. I'm currently upgrading my ram of the current 6gbs maximally whatever my computer supports. My motherboard says it supports up to 16gbs (since I am running Windows 7 64 - bit), and I'm trying to figure out what I should update.  I scanned my pc on Crucial and they gave me a bunch of suggestions, but I still don't know what I should buy.

    Analysis of the computer on the essentials: http://www.crucial.com/usa/en/scanview/65CC1E0131D926C3

    HP computer specifications: http://support.hp.com/us-en/document/c02179806

    Card mother: http://www.findlaptopdriver.com/foxconn-2a92-mainboard-specs-742010h517p/

    Is it smart to upgrade to the maximum ram and what type of memory should I update? In addition, my computer can even support 16gbs of ram? I have receieved conflicting information about it and I need to check the info I got is correct. I will include a picture of my computer listing of Speccy.

    There are a few suggestions on crucial, such as the Crucial Ballistix Sport 8 GB Kit (4GBx2) DDR3-1600 UDIMM LP or the Crucial Ballistix Sport 8 GB Kit UDIMM DDR3-1600 (4GBx2) or 8 GB Crucial Kit UDIMM DDR3-1600 (4GBx2) and so on. (I don't know if you can see the recommended memory when you view my scan. I guess you can, but might as well include some of them that I'm interested in.)

    Here are the specs of the computer of Speccy:

    Thanks for the help in advance!

    The funny thing is, I was about to buy this one right before I posted this, but I just wanted to see what others thought and if I'm right that my pc supports this amount of RAM. Thanks for the suggestion and response

  • Graphics card for HP Pavilion p6632f desktop PC

    I have HP Pavilion p6632f Desktop PC. I want to know which map graphic that I put in to get the most out of this old pc because the hd 4200 integrated is everything just bad .

    Take a look at THIS thread.   This is a somewhat older thread, but maybe you can get the idea.

Maybe you are looking for