Adding a preset to a photo already changed without changing the edit

Similar Questions

• How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  You must delete and re-download this request.

  (140006)

• Wireless Internet takes awhile to connect after the sleep or Hibernate? Already changed the wireless power management settings

  Hello

  I have a Dell XPS 17. I bought last week.

  My internet config:

  Intel Centrino Wireless adapter N 1030.

  I already changed the settings disable the wireless adapter power management "allow this computer to turn this device to save power". After looking at other threads I also did this for USB ports. Drivers have been updated to the last pilot intel: 14.3.0.0

  Whenever I put my PC in sleep or hibernation from the recovery, it does not automatically connect to the internet, and when I select the wireless network, it takes a long time to connect, at least 2-3 minutes. Normally, it displays ' windows takes long time to connect.

  The network is selected to connect automatically, but it isn't after the mode 'sleep'.

  Everything works fine when I stopped and power on as usual. Just not in "standby mode"!

  Hi PMDAY2013,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How do I change Google to DuckDuckGo when you CTRL + K or CTRL + J? (I have already changed the about: config > keyword.url)

  Hello. I have something I want to change the default behavior, but I can't do it.

  Here's what I want to do: I want to change www.google.com to www.duckduckgo.com. However, when I do CTRL + J or CTRL + K he continues to send me on www.google.com.

  Here's what I did: I found that the search bar is now useless. Indeed, the "awesome bar" is so awesome that I have basically need the bar more research. Thus, for a long time, I took it.

  There is only an advantage. When the search bar disappeared, the shortcut which was to place the cursor on the search bar got another behavior. When I use CTRL + K (CTRL + J), the page would automatically change to www.google.com.

  I liked this behavior, because at the time, I used google as my search engine.

  But now I want to duckduckgo, I'm kind of embarrassed by it, especially since I cannot change this behavior. I have re-enabled the search bar and changed the search option above to DuckDuckGo, in hopes that will change behavior. He did not.

  In addition, as DuckDuckGo has said, I changed on: config keyword.url and keyword.enable.

  But I still have the www.google.com when I press CTRL + K/J

  I asked the question to my stream of Diaspora ( http://diasp.org ) and was able to get a solution in the day. Go figure. Before doing this, you will already have DuckDuckGo added to your list of search engine (in the drop box).

  Here is the solution. With the permission of ilyse na' IMO kazar

  in the subject location bar: config. You will need to confirm when you are advised that «this will void your warranty» You will see a bunch of preferences which, if you have never done this before, you never imagined exist under the hood of the FF.

  In the filter bar type browser.search.defaultenginename. In the column 'Value', says Google. Double-click the word Google and a dialog appears allowing you to specify the default engine again. TypeRegeditdans DuckDuckGo exactly as it appears in the drop-down search engines available in your browser. On my Mac the magic string is "DuckDuckGo (SSL)" without the quotes.

  About: config and check it, out worked for me!

• A preset for TV noise or change the kind of effect channel?

  I'm doing an effect as changing the channel like in this video 0:47 at 01:00 http://www.youtube.com/watch?v=ynMk2EwRi4Q & ob = av2e or like in the picture I have attached. Should I use image distortion? Any advice would be much appreciated.

  Thank you!!

  Go into the effect controls panel and presets and type the keyword 'bad '.

  

  Try them all. We can get you where you want to go. You can pile them up if you want.

• Adding a line to an object now changes the form...

  What the hell is happening?

  I apply a stroke to an object and shape change, radically!

  Also, I select a part of a path and use the keys for this boost over a little, but the selection does not move, the other part of the track don't! What gives?

  Herbiedriver,

  If this may be something related to snap to grid of pixels, you can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Or you can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Windows Photo Gallery does not save the edited images.

  I have problems editing contrast and red-eye with Windows Photo Gallery.  I get rid of the red eye and change the brightness, close gallery and get an error message "an error prevents photo library to save this image."  The image isn't 'read only', it is a jpeg file, and I am the owner/user.  I edited many other images, but now it restricts me to do these as well as a few others that I've ever edit.  Any ideas on what's going on?

  Hello sjleite,

  Thanks for posting on the Microsoft answers Community Forum.

  If you encounter problems, saving images edited when you could before, I would ask

  If you have installed the 3rd party software that may interfere with the Windows Photo Gallery.

  (1) If you have a third Party photo editing software, try removing it and see if that doesn't

  correct your problem.

  (2) other forums, I found several mentions to be a problem with a corrupted author field. Look in the file properties Details page. You can get the properties on the photo in question, scroll to the right section of author and origin and remove characters. Select apply and close the file. If the field of copyright has no characters to remove, try adding a few characters and then delete them.

  (3) the last thing to try is to check the permission on the Windows Photo Gallery.

  Go at the beginning and list programs. Right-click on the icon of photo gallery windows live and go to properties. Select tab security put highlight the Everyone group, click the button change. Put a control under all permissions allow. Then do the same for the users group. Click on apply or OK.

  If please post again and let us know if these suggestions helped solve your problem or if you need further assistance.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photo Gallery can't save the edited images

  My Gallery of photos will not save modified pictures.  He did it when I got the computer back in the spring.  I installed Kodak EasyShare software after that and it seems that is about the time when the problem started in the photo gallery.  What options will I get solve this without doing a system restore?  What are the negative aspects of restoring my computer?  Thank you very much!  I don't really know anything about computers.

  Hi computer_illiterate,

  If you are experiencing problems saving images edited when you could before, I recommend you to uninstall the Kodak software and check if you are able to save the images.
   
  (1) If you have a third Party photo editing software, try removing it and see if that doesn't
  correct your problem.
   
  (2) other forums, I found several mentions to be a problem with a corrupted author field. Look in the file properties Details page. You can get the properties on the photo in question, scroll to the right section of author and origin and remove characters. Select apply and close the file. If the field of copyright has no characters to remove, try adding a few characters and then delete them.
   
  (3) the last thing to try is to check the permission on the Windows Photo Gallery.
  Go at the beginning and list programs. Right-click on the icon of photo gallery windows live and go to properties. Select tab security put highlight the Everyone group, click the button change. Put a control under all permissions allow. Then do the same for the users group. Click on apply or OK.

  You can also check out the link below:

  Windows Photo Gallery: frequently asked questions:

  http://windowshelp.Microsoft.com/Windows/en-us/help/d29d1fe4-EECD-4ae0-9efa-423098e5406b1033.mspx#ELFAC

  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Cannot change the editable regions-

  Hi people,
  
  I don't even know what to look for, so if this was taken over by all means please tell me here!
  
  Running on OS 10.4.9 DW8. I use templates in the redesign of the customer, and I implemented a region repeated inside a DIV. My problem is that when I change a file having this model, my cursor gives me the 'no sign' (circle with slash) when I fly over this area. I can change it in the Code and split mode, but I can't click the repeat region to add another element.
  
  This happens from time to time and I just did my work in Code view, but this time I need to click on the little sign of the repeat region to add a box in Design view.
  
  Is this a bug? Is there any solution for this?

  Hi Murray,

  I wish it was! Just a simple old DIV for a sidebar. As I was about to demonstrate by copy/paste code here... when I found the problem! I had a few renegade living in the CSS code (margin-bottom:-9999px) and now that happened I can click in the editable again.)

  Thanks Murray! :)

• Adding photos to change the white balance

  When I add photos in Lightroom 3.2 from my hard drive, thumbnails have the original white balance, but imported and all images have a yellow tint.  My develop settings are set to None.

  It is difficult to understand the details that you have given to date, what is the problem. From my experience, there are three possible reasons:

  1. corrupt monitor profile. The fact that the photos seem to 'well in Windows' does not mean that this reason may be excluded. Most of the applications in Windows are not color management and cannot be overturned by a screen maybe corrupt profile. And even if they are, they might not behave in the same way as Lightroom with some of the ICC v4 profiles.

  To prove that this is not a matter of profile, make sure you remove the monitor profile form display properties or replace it with along with the sRGB profile. Or, after a shot of creen tinted yellow to image in the development with the visible histogram module. If the historgram has the yellow tint also, then - it's profile.

  2. develop predefined import or custom default to develop. Check if you do not apply a develop preset import, or if you have applied a default of custom development. Select an affected image that has not been adjusten in Deleop somehow (the + / badge is missing on the thumbnail) and check each slider on each Panel is equal to ZERO or to the default position. Check if wihte balance is set to "As shot" rather than "Custom".

  3 Lightroom rendering is very different from your camera. Yet one thing that's confusing beginners is how Lightroom rendering is very different from what they see on the LCD screen of the camera or camera previews incorporated which appear briefly after importation, before Lightroom manages to make its own version of the RAW file. I guess that is not the case here, since you say you are having the same problems of JPEG files. But, just in case where, thanks to upload a file raw for us to consider here.

• In Photos, I changed the date, title and information on the location of the images of a slide digitizing company.  I want to preserve the custom metadata and the original resolution of 2500 dpi in a file backup, but when I export it loses my metadata chan

  Using version 1.3 of Photos, I edited the metadata about the images, I received a business of digitization of slides to insert the first day of the slide, the location, a title and a keyword.  I want to archive these images with the original resolution of 2500 dpi, but when I export original unmodified, it does not preserve information.  When I export by choosing export as XMP IPTC, I can't read the XMP file to see if there are my revisions.

  When I export using the 'Export # photo (s)' choice, I can use the previews/tools/Inspector/iptc and see my changes.  But this photo has only 72 dpi.

  Is there a way to preserve this modification of metadata information in the original not modified?  Alternatively, this file has XMP I exported the info?  If so, how can I read it?  And that would mean I need to export both the original unmodified and the XMP file to my files from archive?

  Don't know what you want - well there is a CIO field in the EXIF fields it is meaningless as DPI is not a setting but the result of a math problem third grade - points by (divided by) inches until you add inches per impression you have no IPR - and when you add inches the DPI for printing are determined by calculating not by any setting

  For more information, see http://www.rideau-info.com/photos/mythdpi.html

  A 1200 x 1800 pixels picture printed as a 4'x 6' printing is 300 DPI bit matter what setting the EXIF says

  LN

• You will need to double click on the thumbnails to change the page in view. Is there a way of only simple click on the photos to change the page in the main view?

  I use Adobe Acrobat Pro XI on Windows 8.

  A single click works normally...

• Transfer Photos to iCloud without filling the hard drive

  I'm trying to download pictures and videos up to 1 TB of storage iCloud while using "Optimize Mac Storage" and not deplete my 256 GB Flash storage.  If this is possible, what I am doing wrong?  I've done the research for days and can't find an answer to my question.  I have a MacBook Pro Version El Capitan 10.11.15 running.  Thank you for your help.

  Screenshot 1 - external drive for Photos travel photos

  Screenshot 2 - selected Options in iCloud / Mac storage is full

  Screenshot 3 - storage is full

  Screenshot 4 - only 2741 Photos and videos in iCloud and download stopped

  Another question... I have to turn on the photo stream in order to see these photos on my iPhone or on iCloud Drive on my iPhone?  If this is not the case, how to display these pictures on my other devices?

  

  Your Mac can not optimize your photographs up to what he transferred to them, you're probably just adding them to your Mac too fast.

• Elements 3.0 - change the editing mode and a time base?

  Hey all,.

  I use Premiere Elements 3.0 and I'm trying to create a preset for my new project. My source files for this project are 23.976 frames per second, so I tried the project must match. But in the window "Custom Presets", the drop-down lists for editing and the time base Mode are grayed out - I can't change settings at nothing else than to 29.97 FPS. In addition, the only display Format options have 30 images/s.

  Is there a way I can set them to 23.976 or 24 fps?

  Thank you

  Matt

  You cannot create a custom preset to these specifications in Premiere Elements, Matt. I'm sorry.

  Premiere Elements is limited to standard formats and frame rates.