Adding a secondary network in Ubuntu JEOS in ESXi interface

Similar Questions

• How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  original title: WPA2-PSK

  tblack1970,
  Thank you for visiting the Microsoft Answers community forum.

  This should be something that your wireless adapter on your computer supports, or does not work.  It is not a feature of Vista, but the network hardware.  When your wireless adapter on your computer sees the router which has the active Protocol, it must ask the key and once offers you the key, it needs to connect.  If you do not see this option for your network card, then you should contact the manufacturer.

  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#ECC
  What are the different wireless network security methods?

  If you plan to have a wireless network, you must configure the only people that can access your choice. Here are a few options for the security of wireless networks.

  Wi - Fi Protected Access (WPA)
  WPA encrypts information and it checks to make sure that the network security key has not been modified. WPA also authenticates users to ensure that only authorized individuals can access the network.

  There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards, but it might not work with the older routers or access points. WPA2 is more secure than WPA, but it will not work with some older network cards. WPA is designed to be used with an authentication server 802.1 X, which distributes different keys to each user. This is referred to as WPA-Enterprise or WPA2-Enterprise. It can also be used in pre-shared key (PSK), where each user has the same passphrase. This is referred to as WPA-Personal or WPA2-Personal.
   
  Wired Equivalent Privacy (WEP)
  WEP is an older network security who is still able to support older devices, but it is not recommended. When you enable WEP, you configure a network security key. This key encrypts the information that one computer sends to another computer on your network. However, WEP security is relatively easy to crack.

  We do not recommend the use of WEP. WPA or WPA2 are more secure. If you try WPA or WPA2 and they do not work, we recommend that you upgrade your network card to those who work with WPA or WPA2.

  Authentication of 802. 1 X
  802. 1 X authentication can help improve the security of 802.11 wireless networks and wired Ethernet networks. 802. 1 X uses an authentication server to validate users and to provide network access. On wireless 802. 1 X can work with key Wired Equivalent Privacy (WEP) or Wi - Fi Protected Access (WPA). This type of authentication is typically used when connecting to a network of workplaces.
   
  Let us know if you need additional assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add a secondary NETWORK card to a different network in a virtual machine

  We have two ESX 3.5 servers that have been set up by someone else.  All virtual methods on them to join our network of primary trust.

  Well now, I have a virtual machine that needs to connect to our SAN.  To do this with a box of physics, I would be just a second NETWORK adapter to connect the switch that goes to our SAN (that switch is not connected to our network of trust, it's a completely different IP range), but of course I can't do it with a virtual machine.

  The ESX servers already have a connection to these switches, because the SAN is where they store all the images in VMWare.  But I have no idea where start setting this up to allow the VMs themselves to have a secondary NETWORK card to go to the SAN switch.

  How could I go about this?

  Thank you

  Go to your vSwitch configuration, add a port group of virtual machine (give it a name like "VM portgroup iScsi").

  Then add a new network adapter to the virtual machine and attach it to the new group of port.

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• Grouping of NETWORK adapters and NLB on ESXi 3.5

  I want to get ESXi to load balance the traffic to my NFS storage, but have had no success. My test set up is the following:

  • Two blades each with two physical network adapters dedicated to the ESXi for NFS kernel ports

  • Two switches

  • A NETWORK adapter on each blade is connected to each switch - it isn't an Etherchannel or trunking configured

  • Two NFS devices on a different IP address

  • Eight virtual machines on each blade, four to connect to a data store on each device of NFS

  • ESXi NIC teaming across two network cards with the option "route based on the virtual origin of switch port code.

  My understanding is that each virtual computer must use one of the network cards, but about half must use a physical NETWORK card and half the other. Instead, all the traffic of all eight VMs released a physical NIC if I disable the physical NIC, it moves the second NETWORK card without problem. Then they both work, but he never uses both at the same time. This behavior is consistent across the two blades.

  Is throughbut limited to ~ 110 MB per blade and the storage system can easily exceed this.

  I've attached a screenshot of a virtual switch in place.

  TIA,

  Will be

  Virtual machines are access NFS data warehouses directly? If Yes, then yes it should work that way - however if you are using the NFS data store to host the VM files, including virtual disks and then traffic will turn off the vmkernel port and if have vmkernel unique port then what you are experiencing is expected - the vmkernel selects the outgoing NIC based on the virtual port id so if you have a single port vmkernel will suffice a single port as well as a NETWORK identifier unique will be used.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Adding computer to network - another name for the old

  I added a new computer (Windows 7) to my home network.  The name of the existing network has been "MSHome".  The new computer shows, but under the name of "workgroup".  How can I change the old name?

  Hello

  Look at the Windows 7 Control Panel, System.

  Right in the name of the computer. Click on change settings, choose Edit and change the name of the network.

  http://www.ezlan.NET/Win7/net_name.jpg

  Restart the computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)

  I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.

  I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".

  I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.

  It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?

  Kind regards

  Jason.

  SOLVED

  It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.

  Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.

  Kind regards
  Jason.

• Ethernet and Wifi keep 'identification' network, dualboot Ubuntu works great

  So I have trouble with my internet connection.

  I noticed the things so far:

  -Windows will allow me to connect to the network, but he continues to identify and therefore no connectivity.

  -A dualboot Ubuntu has no problem, I really write this for Ubuntu.

  So I wanted to go to a previous restore point to see if it would help.

  -However, I can not open the 'system protection' tab in the 'system' application (that needs administrator rights). (The service has failed to demand launch or timely control)

  -J' found that I can't run anything that has no need for administrator rights. When I try to run it, the app of interest freezes.

  Also, one last thing, could be bound or completely independent:

  -PC will not turned off properly, it keeps saying: 'close '. (tried up to 20 minutes) So I had to reset the PC hard.

  Help would be greatly appreciated!

  Cordially Bart

  Hi Bart,.

  We are here to help.

  Well insulate your concern, we need to collect the following information:

  1. Did you do the changes on your device before this concern?
  2. You have connected your device to a different network?

  You can start your machine in Safe Mode with network and includes the network drivers and services that need to access the Internet. You can also use the System File Checker to repair system files missing or damaged that may help solve your problem.

  If you have exhausted the above options, you may perform a clean reinstall on your Windows 7 device and check if it works.

  Keep us informed.

• Problems of network with Ubuntu 10.04

  Hello

  I've been running vmware on Ubuntu 9.04 for a while with no problems (host Ubuntu 64-bit with 2 guests, 1 32-bit Ubuntu and Ubuntu 1 64-bit).

  I've recently updated my Ubuntu to 10.04 and ran into problems with vmware, I followed the instructions here (http://www.marcosorfila.com/site/?p=380) and managed to get Ubuntu works with VMware 2.0.2 and my guests are here. Everything starts fine, except that I got the Firefox issue with the console. To work around this problem, I can connect to the console using my computer laptop windows and Internet Explorer, so I'm happy on this front

  My network uses NAT and it worked well with older versions. If I connect to the console on two comments I ping the host or guest, but for some reason, my host cannot see my guests. I spent the last 3 days, google search and I can't find anything to indicate how to solve this problem. The two guests are versions of server with no windowing capability and I normally rely on ssh access from the host, but it does not work either.

  My host is using a wireless internet network interface and this includes the IP 192.168.1.3, subnet of VMware is on 192.168.194.x

  Can anyone offer any advice to get access to my guests from the host?

  Thank you

  Klunk

  I managed to find a solution to this. I need to use a patch different than I used initially. Details can be found here.

  http://UbuntuForums.org/showthread.php?t=1473373&highlight=VMware+ping

• MAX, adding a device network (TCP/IP)

  I'm introducing a new network device on my system following a tutorial that gave me (attached to this post). When I opened to the MAX, I should be able to open the tab "Devices and Interfaces" to access "Network devices" and select the option "create new VISA TCP/IP Resource...". ». However, I can not open the 'Devices and Interfaces' tab (see screenshot) or right click on it.

  Maybe what it takes with me using a LABVIEW evaluation Version? We ordered the software, but are still waiting to receive it.

  Thank you

  I know NI Max is limited in this way for trial versions of LabVIEW.

  If you just select the menu devices and Interfaces, there should be a 'Create New' button at the top of the main pane.  At least that's what I see in MAX 14.0.0f0

  When you installed LabVIEW, have you installed device drivers?

  There are a number of other posts on the Forum with the same question.

  http://forums.NI.com/T5/LabVIEW/Max-does-not-list-devices-and-interfaces-in-tree/m-p/971677#M435649

  http://forums.NI.com/T5/real-time-measurement-and/right-click-quot-devices-and-interfaces-quot-does-...

  http://forums.NI.com/T5/LabVIEW/Max-has-no-quot-devices-and-interfaces-quot/TD-p/1551534

  Looks like it's usually due to a shortage of pilots.

• Adding the iSCSI network switch

  Hello

  We have an iSCSI network for guests of vSphere 5.1 EQL boxes. The network is 192.168.0.0/24, we use the switches PC5548 and we have three groups EQL. Everything is configured following best practices from DELL, and everything is kind of okay job.

  Since we are affected by the poor performance of our SQL servers virtualized and troubleshooting led switches as a guilty suspect I want to try to use other switches to know.

  So I intend to add a pair of parallel to the PC5548 cisco switches and connect a host and a group of PS to those (where the SQL VM reside) and see the difference, but my question is that I can use the same network 192.168.0.0. / 24 although cisco and dell switches are not physically connected. VMotion work?

  You shouldn't use the entry level switches with 10 tables. The interlink trunk has 80% of eql bandwidh. You can consider buying Dell Force10 switches with buffers of large size and low latency.

  Kind regards

  Joerg

• CMS OVA, adding the second NETWORK card breaks the first NETWORK card

  I'm testing CMS 2.0 and when I try to add a second NETWORK card in VMware, he immediately interrupts the first network card.  As soon as the loading of the image, the first NIC fails.  Even if I disable iface b, it will allow all traffic where iface one.  If I stop the application, remove the NETWORK adapter and run it back again, it works very well to the iface one.

  I want to test the public face with box feature, but I can't if I can't add a second network card.

  How do you add the second network interface and interface you add?

  You should add 'VMXNET3' type if you use VMWare, if you chose something else, you invalidate your license, see section 3.3 of the virtualized CMS 2.0 Setup Guide for deployments.

  If you need assistance, you must move this thread to the section of telepresence of forums, where this device is actively discussed.  You can change your question and change the categories at the bottom of the page.

• Secure ACS 5.7 - adding a secondary server to the primary

  Hello.

  I recently set up two servers Secure ACS 5.7 primary. I want to make one of the main servers a secondary server. When I try to register at the elementary level, I get the following message:

  This failure has occurred: save failed due to invalid certificate. Your changes have not been saved.

  Both servers have valid certificates. But other that to extend the validity of the cert, no other changes have been made.

  Any ideas please?

  Thank you

  Daniel

  Hello Daniel,.

  For the communication of trust option work. It is necessary to use certificates signed by one or the other it external or internal, and add to it, you must import the transmitter respective root/intermediate cases under "users and storage of identity > section"Certificate authorities"on both ACS servers.»

  Alternatively, you can choose not not to use the feature "Trust communication" by going in "System Administration > Configuration > global system Options > Trust Communication Settings." and uncheck the check box for the feature.

  Note: Please mark responded as appropriate.

  Note

  Note

• Adding a secondary server of GBA 5.4

  Hello

  My client has an ACS 1121 version 5.4. Now, we want to install a 1121 ACS secondary.

  Can someone help me with the procedure?

  Thank you

  Hi Jonathan,.

  Please follow the user guide:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/admin_operations.html#wp1056068

  The Log collector will be for the entire deployment. It is recommended to have the collector of newspaper on the body that manages less queries AAA.

  To set the Log collector:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/admin_config.html#wpxref50831

  Pawel