CMS OVA, adding the second NETWORK card breaks the first NETWORK card

Similar Questions

• Adding a second NETWORK card on the server HP Proliant ML 350 G5

  I have a new HP Proliant with a guest of Windows 2008.  HP came with two network cards on the MB.  I need double-home this box on both networks, at least for a while, and this server will be the only road between subnets.  It's just a stand-alone installation inset.

  I looked in the settings of the BIOS on the HP and it's a little confusing, but I'm sure that the second network card is active (it lights up when it is plugged).  When I try to add a NETWORK adapter to the configuration of the host, it is as if the second NETWORK card is not present.

  My question is what is the best way to add this second NETWORK adapter and how do I do that?

  I'll need access to the host of the VI Client on both networks - at least for a while.

  Any help would be greatly appreciated.

  If you go to configuration-card network in the vSphere client is the 2nd NETWORK card that there are listed?  If ESXi is able to recognize the NETWORK adapter (or other people that you add) they should appear in this list without any config changes and be ready for use.

  What kind of networks are you fill?   If one is considered not secure you could be better not add a management on this network port and prefer to have access via a VPN VM or a secure hosted VM / dual.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Will, adding a second video card to the top of my total video memory or each card is discreet?

  Very well.  I have a desktop which is a few years old, and I need to more video memory in order to run some new games smoothly.  So far, my 'helper' on my desktop HP has been useless for helping me find this basic information:

  -Info on my diet

  -I still have how many slots have opened

  Also, will adding a second card to the top of my video RAM in all, or do I have to replace the primary card?

  Thanks for any help!

  Info:

  Model name d4996t

  Microsoft Windows Vista - Home Premium Edition (x 32)

  Current vidcard NVIDIA GeForce 8800 GTS

  Motherboard Info:

  Motherboard
  -----------------------------------------------------------------------------
  
  System Board

  Chipset Intel Q35/Q33/P35/G33 SouthbridgeIntel 82801IR (ICH9R)

  
  Box spring

  Manufacturer ASUSTeK Computer Inc. productBurbank

  
  BIOS

  Name of the vendor American Megatrends Inc. Release Date 2008-12-17 the string of BIOS Version 5.21 ROM size1.00 MB

  
  Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz CPU:0

  Specification of the Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz size 64,00 k size4.00 MB

  
  Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz CPU:1

  Specification of the Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz size 64,00 k size4.00 MB

  
  

  Hello

  Review the following sugggestions:

  Sapphire Radeon $6850---135 after rebate, 128 GB / s---> probably the best price/performance ratio

  Sapphire Radeon $6870---170 after rebate, 134 Gbit / s---> 3D ATI support

  EVGA NVIDIA 560 TI DS$---240 after rebate, 134.5 Gbps

  EVGA NVIDIA $560 ---160 after rebate, 128.2 Gbps

  Corsair CX600 POWER block $---50 after rebate---> measure your current diet and make sure that it matches (5.9x3.4x5.5)

  ' HP ' how-to 'articlesshould be useful.  Read the reference document which I had quoted above.

• HP ENVY Phoenix 860-078na: adding a second graphics card for HP ENVY Phoenix 860-078na

  I think to buy a HP ENVY Phoenix 860-078na and I was wondering if it is able to take a second graphics card and can accommodate a Corsair H60 liquid CPU Cooler. Thank you

  Felix, welcome to the forum.

  There is only one PCI Express x 16 (Genesis 3) slot for a video card.  With respect to liquid cooling, medium size case do not have a lot of space.  I have a Phoenix 860-170VR with an R9-390 X video card and it is extremely tight.  However, having said that, I think you wouldl be pleasantly surprised by the way the computer will be with existing components.  I can play COD series on the best settings.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Question on performance when you are adding a second GPU card

  Hi all.

  I'm in first Pro CC 7.2.1 for Windows and want to add a second GPU card (have a GTX-760 now, so I want to add a second card as well).

  I know that the PP CC can use multiple GPU cards during export (not reading) is great! ... but what I want to know is If it also several GPU is used when creating previews too (I mean when rendering effects in the work area of the sequence by pressing Enter key).

  It is important for me to know if the two GPU will do this task (I do a lot with full-HD images). Thank you that much ahead of you guys.

  Rendering is the term used when talking about creating preview files, then Yes.

• How to associate a VM for the second network adapter on the host

  Hello

  I have created a virtual machine and added a NIC that matches the first physical network adapter on the host Machine. I then added a second NETWORK adapter on the host. I would like to create the second network adapter on the same VM and map it on the second NETWORK adapter on the host. How can this be achieved.

  When I use the "Add Hardware", I does not enumerate the physical network adapters on the host to choose and assigns a VM mac address.

  Kind regards.

  VMware customers use virtual network adapters if you need for a great, a second deck on the host card, but how to do this depends on the host OS.

  For Linux, just run vmware - config.pl and choose to create a second bridged network adapter, choose the right pair of physics.

  For Windows, run vmnetcfg.exe (as an administrator), disable the automatic bypass and then manually fill the two physical network adapters (for example to create two VMnet adapters * with each mapping to a different physical NIC). You also need to restart the host VMware Agent services and VMware Server Web Access before these virtual cards will be available for use.

  Chapter 11 of the guide is a good reference for all this - http://www.vmware.com/pdf/vmserver2.pdf

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Add the second NETWORK card to vSwitch

  I'm working on trying to add to install a second NIC physical to the vswitch which is installed by default when ESXi. I use the code below, but when I run it, it disconnects in fact the main physical network card and of course, I then lose connection. I tried different varients of this and even finished by adding a port of vmk, which I didn't do. I just want to add the second network card as a standby card network.

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1
  

  The cmdlet Set-VirtualSwitch accepts a string array as the value of the parameter - Nic. So you should be able to:

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1,vmnic2
  

  Best regards, Robert

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Impossible to use the second NETWORK card on VM

  I'm under VMware Workstation9 and I'll put up a configuration 5.1 ESXi

  VM1 - Windows 2008 - acting as a DC and a NFS storage
  VM2 - ESXi 5.1

  I added a second NIC on VM1 and VM2 to IP storage but I can't PING vice versa

  IP address:
  VM1 - 198.168.150.10 SM: 255.255.255.0
  VM2 - 192.168.150.11 SM: 255.255.255.0

  VMnet2 is used for the management, no problem with this vmnet3 is used for storage traffic but no communication possible

  Any Suggestion?

  Check the response of jmattson to Re: operating system of the virtual machine attempted to activate the adapter Ethernet0 promiscuous mode. This is not allowed for security reasons. solves the problem.

  André

• best way to put up a second NETWORK adapter for the data on NAS Server store

  I want to add a second NETWORK card if I can get the best possible performance for when I move the data store of the ESXi host to the NAS (which will also have a dual NIC). What is the best way to set up the NETWORK card on the ESXi host to achieve?

  PS - I am aware that I am limited to the real network speed of 1 Gbps and conditions and I agree with that (any of the virtual machines are eager resources or production).

  SOLVED... I think so. JPM300 got on the right track, but I was still not clear on it so I googled all this involving and finally landed on an iSCSI with MPIO configuration. I ended up as a result of this article (I use a Synology DS415 +, but the steps are pretty universal): How to use iSCSI targets on VMware ESXi with Multipath i/o - SynologyWiki. The article is old but always worked perfectly for me. I checked the two paths/NIC are used simultaneously, but I did not actual test to see if I have 200 MB/s of bandwidth (I've seen 80 MB/s when the cloning of virtual machines to the new iSCSI data store using vmfstools).

  I ran into a problem where the second path is not added during the alternating market; I removed the path shown and then was able to add the second path, then the first path again.

  Hope this helps someone.

• Problem with the second red card

  Hola, the sober consultar queria a problem that I am having in el con host the second red card.

  Tengo UN esxi 5 desde hace one wont by Dias y estoy beginning an armar una pequeña infrastructure virtual, en el host estoy necesitando una segunda tarjeta red are only in el mismo voy a put a device that makes a kind of proxy, por lo Québec Necesito tener tarjetas UN 2 red, pero el just greet me detecta to edge.

  Don't probe change the tarjeta por otras pero no reconoce la, son todas tarjetas genericas estan bullfighting in the list of compatibility than por eso por no haber problemas should.

  He buscado in documentation pero las cosas as he found me None ha sido of utility.

  The found a worm if me can perform o algo a prueba alguna indicate that me can help con el problema.

  MUCHAS gracias!

  Hola Matias,

  If going to a network adapters appears todas las NIC?

  A greeting.

  Sent from my iPhone

• setting up of a second NETWORK adapter on the ESX machine...

  I'm in the part of my ESX machine and I NIC one configured for LAN, but I try to activate and configure a second NETWORK adapter on this computer, so I can connect it to a VLAN different. When I go I see the place to allow the second NETWORK card (and I have) but it says always "disconnected" and I see only the settings for the first NETWORK adapter in the IP configuration screen. How can I set an IP address and stuff for the second NETWORK card, and why is it showing as offline after that I went out and restarted the management stuff?

  Go under ESX / Configuration / networks.

  You will see your vSwitch. You can change it or click Add, to add a new vSwitch.

  For the basic concepts, see also:

  http://www.VMware.com/files/PDF/virtual_networking_concepts.PDF

  André

• Lab Manager V3 and a second NETWORK card

  Hello everyone. I have a question I hope you can help me with. In Lab Manager V2.5, we were having a problem with fencing. Our fencing required 5 IPs and our customer wants about 100 fences. As we seek to do not use more than 2 C all classes of IP addresses, we hoped an alternative solution.

  Our current idea is to try to use the second NETWORK card on a separate internal switch. This option would use the internal IP for 4 IP addresses and an external IP address. Although this plan seems feasible in theory, the V2.5 Lab Manager did not work to achieve this end. Thus, we are now experiencing V3. Does anyone know if this plan of attack is feasible? If so, what measures are necessary to achieve this goal? The second NETWORK card will be detected automatically by the Lab Manager, or is there a configuration I do not see any there to achieve?

  In short, I need to know if a second NETWORK adapter is feasible with V3 before submitting a request for a second switch. Please let me know if anyone has any info on this subject. Thank you kindly.

  LM 3.0 allows to use up to 4 network LM by VM Interfaces.  A Network Interface is the combination of the virtual NETWORK card and a physical interface LM LM 3.0, or virtual network.  Networking has been considerably strengthened LM 2.5 days.  Instead of a comprehensive physical network, you can have several (limit)? Physical networks that map to vSwitches in your vCenter/ESX host environment.  The Act of creating a physical network of LM 3.0 creates a group of ports on the vSwitch that you you mapped physical network LM.  Each physical network can accommodate up to worth (1024) 4 c of static IP addresses.  If you want that your different physical networks LM using different physical network interface cards on the ESX host, map to different vCenter/ESX vSwitches.

  Fencing is also managed a little more dynamically without the limitations in number of closed configs that were in previous versions.  All virtual machines in a fenced config needs to be hosted on the same ESX host however.

  Oh, virtual networks are a separate issue, which allow the installation of a local network visible only to virtual machines in a configuration.

  I hope this helps.

  Don't forget if the answers help you, award points

• Is it possible to add the second graphics card for this model Y510p?

  I've been doing mixed responses from customer service chat lenovo so I'm posting my question here. Recently, I bought this laptop. It comes with a single graphics card. I heard this model has ultrabay and you add another graphics card. My question is - is it true that you can add a second graphics card in this system by using ultrabay? Please let me know. I'm confused if SLI and ultrabay means the same thing. If this is the case, then this system is not sli. I appreciate your help.

  http://shop.Lenovo.com/us/en/laptops/LENOVO/y-series/y510p/?SB=:000001 C 9: 00011E0A:

  Also, don't forget to find the extra $20 or sometimes $50 discount code for the Lenovo y510p and apply it to the Fund. The time I bought my laptop I used the code USPY5168320, you will find a similar code if this does not work.

• losing audio after adding the second screen

  Why am I losing my sound after having added the second screen (sony sdm-hs95)?

  My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:

  • • Windows 8.1 64 Pro
  • • 4th generation Intel® Core™ i7-4800MQ processor
  • • Included 2-year warranty
  • • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
  • • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
  • • 8GB DDR3 System Memory (2 Dimm)
  • • 2 TB 5400 RPM hard drive
  • • 24GB flash acceleration Cache hard drive
  • • Two batteries of Lithium-Ion 6-cell
  • • Blu - ray player & SuperMulti DVD burner
  • Backlit keyboard •
  • • HP TrueVision Webcam high definition with digital microphone built-in
  • • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]

  Thank you

  Hello

  How do you connect the second screen? Using HDMI? If so, please disable the sound HDMI playback devices

  Right click on the speaker icon > playback devices select > right click HDMI Audio then turn it off

  Kind regards.