Adding an event onRelease to a button in a movie

Similar Questions

• ERROR: Adding an event listener to a button in the main scenario

  I'm trying to get a simple script to work temporarily to show features. This file is a menu.swf file that loads below content.swf.
  
  There are 4 buttons on the main timeline and a stop at frame 40. On the same layer that my button is and frame 40, I have this code under actions. dineContent is the instance name of the button that I am referencing.
  
  However, I get access error 1120 property undefined.
  
  I know that I can add an event listener to an instance name. I have to create a film about all these buttons and then reference the instances of button inside the movie?
  

  I started playing with a bit more and found the solution.

  SOLUTION:
  in the property inspector to my instance of dineBtn named "dineContent", there is a contextual list under the "instance of: _" txt where you can choose between the track as button or Menu item.

  You must use the track as Menu item. the default value is button.

• event onRelease button question

  I have a button that appears on the stage in the middle of my film.  I have also some actionscript (on its own layer) that fits on an event onRelease (getURL) this button.

  If I place the ActionScript in the first frame - until the button appears on the scene - it does not.  If I place the ActionScript to the same point or button, it works.

  Is it the way it is supposed to be, where actionscript will not work on a symbol that has not yet appeared on the scene?  If so, don't know why I never noticed it before.  Here again, it has been a while so I'm new so back in mode newbish:------.

  Thank you

  David

  Yep, that's the way it is... code cannot attack something that is not present when it runs.

• Is there a c# example to use the event handler ExpressionEdit Custom Button control

  TestStand 4.1

  VISUAL C# 2008

  I've added the event handler for ExpressionEdit events as I would any event handler:

  exprEdit.ButtonClick += new NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler (_ExpressionEditEvents_ButtonClickEvent);

  Then, I create the event handler using the syntax

  public void _ExpressionEditEvents_ButtonClickEvent(NationalInstruments.TestStand.Interop.UI.ExpressionEditButton btn)

  {

  }

  I get the following error when I compile Isaiah:

  Error 1 no overload for delegate matches '_ExpressionEditEvents_ButtonClickEvent' 'NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler '.

  I guess that means that I don't have the right parameters or types in my statement of event handler, but it corresponds to the object browser.  Any ideas on what I'm missing?

  See my last edition but I think you want your handler to look like this:

  Public Sub exprEdit_ButtonClick (ByVal sender,
  NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEvent
  (e)

• I have a table of the adf, I added a column that contains a button that I created, when I click it must remove this row in the table, but it is not, please help

  I have a table of the adf, I added a column that contains a button that I created, when I click it must remove this row in the table, but it is not, please help

  I don't understand. You use vo and eo for you to use business components.

  Again, this kind of code call in trouble.

  You must post the changes to make them visible to the eo find vo. You must then run the query for the changes in the business layer strips then you must update the iterator he table is based on.

  In your code I see that happen, hooch maybe because it is more often than not formatted and undocumented.

  My advice is to do a small test case that you can manage with easy sql. Once you get it to run transfer you the results to the actual application.

  Timo

• How to access a button in a movie clip?

  I have a button (myButton_btn) that is nested in a few video clips. How do you get it from the main time line?

  This look like a code appropriate:

  firstLevel_mc.secondLevel_mc.thirdLevel_mc.myButton_btn.addEventListener (MouseEvent.CLICK, onClick_goHome);

  function onClick_goHome(event:MouseEvent): void {}

  this.gotoAndPlay ("homesequence");

  }

  or it should be something like this:

  myButton_btn . addEventListener ()MouseEvent. Click ON , onClick_goHome);
  
  function onClick_goHome (event: MouseEvent):void {}
  MovieClip ()firstLevel_mc.secondLevel_mc.thirdLevel_mc). gotoAnd Play ("homesequence");
  }

  The first would be appropriate to assign the event listener for the button of a distant relative chronology, but as long as the event handler functions go, you haven't identified what you are trying to control according to the gotoAndStop command is concerned.  But targeting happen in a similar way as the event listener... you intend to the timeline, you're in.

• Clickable button inside the movie clip symbol?

  I would like to know how I can have clickable buttons inside a movie clip symbol.
  
  
  Thank you.

  Your problem is mainly code compared to the location of objects location. When you start the file, the keys 1 to 8 are classified under code because they are visible, while the 9-11 thru buttons are not because they live in a non-current setting of the miniature timeline. When you switch to the side MORE things, these buttons is not any code assigned to them, and when you come back, the same is true for the first eight buttons because they were out of the picture and lost their connection to any code (the previous assignments have been already spent to frame 1 of the main timeline).

  What you should probably do is locate your button code for frames where the buttons in the thumbnail movieclip. In this way, their code is always where they are. The code of the keys 1 to 8 will be in frame 1 of the miniature clip and the code for 9 to 11 will be in frame 2. You need to change the code for the form:

  thumb1.onRelease = function() {}
  _parent.gotoAndPlay("1");
  };

  And you're going to do you a favor if you do not use the numbers of the labels.

• How to create a button with rollover that appears in a different place than the button when you move?

  Hello

  How to create a button with rollover that appears in a different place than the button when you move by using only the Muse (reversal may be a different shape and color of the button). I managed to do it using Photoshop and the separate layers and import it, but it is not a good solution. All suggestions will be welcome.

  Thank you

  You can try to use the widget of the Composition of the ToolTip. In this way, the trigger area is isolated and a "State of reversal" can be placed anywhere on the screen (compared to the trigger).

  • Remove the two triggers additional default
  • Set to display the targets on working capital
  • Select hide all initially.

• Control the main timeline of a movie via a button in a movie on another level.

  Hello!
  I have two film is at two different levels.
  Level 5 is my base film and I load another movie on top of that in level 10.
  Once the user clicks on a button in the movie to level 10, I would like to animation to level 5 to stop (the animation runs on the chronology of the main root of level 5).
  
  Once the user clicks a different button in the movie to level 10, I would like the animation in the main timeline of the movie in level 5 again from the moment it was already stopped.
  Is this possible?
  
  It would be great if someone could help me with this.
  Thank you, midi_ie
  

  You can't delete this loop of onClipEvent (enterFrame) unless you remove the movieclip to which it is attached. However, you can add an else if statement in your code (in addition to checking the variable Boolean "drag") to check if your _level10 button has been activated.

  and you can delete a slider.onEnterFrame loop, but you probably don't want to do.

  p.s. make the loop enterFrame?

• Adding user events

  I have two screws that two raise user events (in the real application may have multiple events, can be added in the future). These screws must be independent of each other to be reused under source code control, so I like to keep a generic if possible solution. When I wire up one after another, the structure of the event only allows me to generate events user to one of the screws (a final) and not from these two subVIs.

  No elegant workaround solution?

  Hi jcurl,

  here a solution for you.
  You have over the "user event on" to the connector pane.
  Then, you can use the node 'Register of events' in your main vi.

  As an attachment, there is a screenshot and set the example.

  Best regards

  Mencef

• How to fire an event with a Boolean button only when you switch on IT?

  Hi, I have a problem with my structure of the event: I use a value Boolean on/off button to launch a State (using producer consumer architecture).

  When I turn it on, my structure of event get "change value" and the code is executed.

  But when I turn it off, the loop in the code ends, but there is a problem: the event 'change of value' is activated again, and the code is run again.

  How can I avoid it? It is not 'on' or 'off' events to the event structure, only "value change.

  Here are a few screenshots, thanks in advance

  J.D.,

  Use the NewVal Terminal in the case of the event.  Who has the value of the control.  If it is true, queue the message.  If it is false, do nothing.

  Generally, it is better to have order in the case of events and to send messages to consumers through queues.  Nested loops as you seem to have can create difficult problems of what must happen when.  It is unusual for a state machine need a nested loop which requires intervention by the operator.  Without the VI all I can really say what you do, but I strongly suspect that there are way more robust and easier to do.

  Lynn

• create subroutines for several structures of the event and common stop button

  Hi guys,.

  I wonder if there is a better way to design algorithm below scenerio that similar technical rehearsal for each structure of the event.

  Please find in annex vi where I designed the code to a boolean (D). I want to design a similar code for all other bolleans. (In the present design code, photo is displayed when the mouse is flown over D). I obviously have other pictures for the other,(A,B,C,E,F) booleans. Can we have a kind of subroutines for other Boolean types and a single stop for all the application button.

  Thank you very much in advance for your support.

  Sorry (I forgot to add vi) Please find attached.

• Adding key event to different parts of a pie chart

  Hi, I'm working on a Blackberry app I need to create pie chart from an array of integers. Unfortunately I could not find any graphics APIs for Blackberry (is there really one?), so I've implemented using the method (graphics.fillArc).

  Here's my PieChart class:

  public class PieChart extends Field
  {
      //declaring private variables to store data
      private int[] percentage;
      private int[] angles;
      private int totalRecords;
  
      //declaring colors to be used in pie chart
      private final static int[] availableColors = { 0x00CDCD, 0xFF0000, 0xFF00FF, 0xCC9900, 0x9900FF, 0x990000, 0x66FF00, 0x6600FF, 0x3300FF, 0x0000FF};
      private final static int totalAvailableColors = 10;
  
      //assuming 250 for chart width and height
      private int chartWidth = 250;
      private int chartHeight = 250;
  
      public PieChart (int[] marks)
      {
          //calculating percentages and angles covered by each record
          totalRecords = marks.length;
          int sum = 0;
          for (int i = 0; i < totalRecords; i ++)
              sum += marks[i];
          percentage = new int[totalRecords];
          angles = new int[totalRecords];
          for (int i = 0; i < totalRecords; i ++)
          {
              double percent = marks[i] * 100 / sum;
              percentage[i] = (int) percent;
              angles[i] = (int) (percent * 3.6);
          }
      }
  
      protected void layout(int width, int height)
      {
          //setting the field to cover the whole width of display
          setExtent (Display.getWidth(), chartHeight);
      }
  
      protected void paint(Graphics graphics)
      {
          //generating a random color from predefined colors
          Random random = new Random();
          int lastAngle = 0;
          int previousColorIndex = -1;
          int startColorIndex = random.nextInt(totalAvailableColors);
          int currentColorIndex = startColorIndex;
  
          //adding offset to create the chart at center of the screen
          int offset = (Display.getWidth() - chartWidth)/ 2;
  
          for (int i = 0; i < totalRecords; i ++)
          {
              //if last record, cover the remaining area of the circle
              int finishAngle = i == totalRecords - 1 ? 360 - lastAngle : angles[i];
  
              //drawing the arc
              graphics.setColor(availableColors[currentColorIndex]);
              graphics.fillArc(offset, 0, chartWidth, chartHeight, lastAngle, finishAngle);
  
              //calculating text position to print the percentage
              int txtX = (int) (125 + 75 * Math.cos(Math.PI * (lastAngle + angles[i] / 2)/180));
              int txtY = (int) (125 - 75 * Math.sin(Math.PI * (lastAngle + angles[i] / 2)/180));
              txtX -= graphics.getFont().getAdvance(String.valueOf(percentage[i] + "%")) / 2;
  
              //drawing the percentage over the respective section
              graphics.setColor(Color.WHITE);
              graphics.drawText(String.valueOf(percentage[i] + "%"), txtX + offset, txtY);
              previousColorIndex = currentColorIndex;
  
              //tracking total angle used so far
              lastAngle += angles[i];
  
              //checking if color generated is previous color or starting color, if it is the last of the record
              do
              {
                  currentColorIndex = random.nextInt(totalAvailableColors);
              }
              while ((i == totalRecords - 1 && currentColorIndex == startColorIndex) || currentColorIndex == previousColorIndex);
          }
  
      }
  
  }
  

  Now, when the user touches a any part of the generated pie chart, I need to show him the details of this particular section, which is different for different parts of the chart (for example. Say that if brands of students is used, during the click on an article I have need to display information about the marker). From my understanding, different parts of the pie chart must be different fields to contain the touch individual events. However, it seems there is no way to create irregular fields, and I can't reach camembert if I use fields rectangular for different parts of the chart (such as it's going to tear the pie! ).

  Any suggestions?

  BTW I develop for BB OS 6.0 (Blackberry Torch).

  The word dreaded no programmer doesn't want to hear: math. You'll just have to figure out where all of your divisions are based off of their percentages, determine where the touch and then discover what segment is in.

  In fact, I don't think it's going to be too bad, just refresh you on geometry.

• Touch event works outside the buttons

  Hello

  I'm developng a touch phone application and type. Now on a single screen of the application, there are 3 buttons. Is the screenshot below:

  

  Here if I touch three-button, it works. But if I touch outside the buttons, we hear in the bar at the top or in the bottom bar, then touch event also works. Suppose that in the bottom, add more button is focused. So if I touch on the lower bar, then also touch button works correctly. To resolve this problem, I wrote the code below:

  try {
              int touchXPos = event.getX(1);
              int touchYPos = event.getY(1);
              int addBtnXPos = btnAddMore.getLeft();
              int saveBtnXPos = btnSave.getLeft();
              int helpBtnXpos = btnHelp.getLeft();
  
              int vfmTitleTouch = m_vfmTitle.getHeight();
  
  if ((touchXPos >= addBtnXPos + 40) && (touchXPos <= (addBtnXPos + btnAddMore.getWidth() + 40)) && (touchYPos <= screenHeight -10) && (touchYPos >= (screenHeight -10 - btnAddMore.getHeight()))  /*&& (touchYPos < (screenHeight-gmYPos)) */)
              {
                  Logger.out("touchEvent", "------------------------------1");
                  showPopUp();
                  return true;
              }
  
              else if ((touchXPos >= saveBtnXPos + 40) && (touchXPos <= (saveBtnXPos + 40 + btnSave.getWidth())) && (touchYPos <= screenHeight -10) && (touchYPos >= (screenHeight -10 - btnSave.getHeight()))/* && (touchYPos < (screenHeight-gmYPos))*/ )
              {
                  Logger.out("touchEvent", "------------------------------2");
                  saveToDb();
                  return true;
              }
  
              else if ((touchXPos >= helpBtnXpos) && (touchXPos <= (helpBtnXpos + btnHelp.getWidth())) && (touchYPos <= (btnHelp.getTop() + btnHelp.getHeight())) && (touchYPos >= btnHelp.getTop())/* && (touchYPos < (screenHeight-gmYPos))*/ )
              {
                  Logger.out("touchEvent", "------------------------------3");
                  UiApplication.getUiApplication().pushScreen(new HelpScreen());
                  return true;
              }
              else if ((touchYPos <= screenHeight - hfmBtn.getHeight()) && (touchYPos >= (vfmTitleTouch)))
              {
                  Logger.out("touchEvent", "------------------------------4");
  //              Logger.out("touchEvent", "touchY::::" +touchYPos  + "Vfm Title::::" +vfmTitleTouch  + "  "+"GM Y Pos"+  gmYPos);
                  return true;
              }
              else
              {
                  Logger.out("touchEvent", "------------------------------5");
                  return false;
              }
          }
          catch (Exception e)
          {
          }
  
          return super.touchEvent(event);
      }
  

  But it does not work... Can someone help me?

  And touch event should work in the middle of the screen as for the boxes also...

  Thank you...

  I tried this way... But it does not work. The same problem. Touch outside of the button, it works to the functionality of the button.

• Adding an event does not add the JavaScript code to the code automatically window

  I'm learning to animate Adobe classroom in a book (among others).  The lesson says to add an event to the timeline.  I click the icon "open stock" ({}) to the beginning of the row on the timeline for the item that I want to add an action.  The edit window appears.  I click on "mouseover", and only a comment is added to the window instead of the Javascript code.  I have to enter the code manually.  Animate is no longer does this in the code window actions?

  Note that the second stage ("choose a target") is required to automatically add the code.

  You must select an object, and then click Enter.