Adding applications instead of 11 Pro?

Similar Questions

• Unable to access applications on HP Officejet Pro 8600 Plus

  Hi guys,.

  I can print wireless and print remotely using the ePrint on my iphone and ipad apps.  Until very recently, I was able to access the applications, but that stopped. Now, I get the following error message:

  "The printer could not connect to the server. Chieck your internet connection and try again. »

  The internet connection is stable and a fine. Any ideas?

  Hello londonlaw,.

  Welcome to the Forums of HP Support!

  Sorry to hear about the latest issue, trying to access applications on your Officejet Pro 8600, I want to offer a few suggestions that may help.

  • Look for updates on the printer, getting the latest Firmware and updates.
  • Turning the printer off, and then make sure that the power cord is connected to a wall on Let's.
  • Then, you want to reset the router. If it has a power press that button in the opposite case, remove the power cord. Wait 60 seconds and then allow it to be able to save. Once the router is right, turn on the printer.

  Try to access an application, if it works it is useless to continue. If it doesn't, try the following suggestion.

  • Refer to this topic, has responded with a colleague happytohelp01 : 7510 Efax still doesn't work after turning on and off repeatedly ePrint. Follow the steps to set a manual IP and DNS of the printer on the network. The steps will be the same, if not very similar to your printer like the one in the above post.

  Try an app once it made, if it is still impossible, continue below.

  • Go back to the Thread above, rather than to use the DNS suggested trying this set; Primary DNS server: 209.244.0.3 & Secondary DNS Server: 209.244.0.4.

  Try to access an application, if the function still does not work, you need to call HP Cloud team. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the number of Technical Support for your country/region.

  I hope this helped, if has, please let me know what step has helped.

• can we put the application instead of the unknown icon icon in the permissions screen during installation.

  Hello

  During the installation of my screen first app I see a screen of Permissions, where unknown icon appeared. But when I downloaded an application through Appworld I saw the Application instead of the unknown icon icon.

  How can I show the Application instead of the unknown icon icon?

  Help, please

  Thank you all,

  Found I was missing the icon property in the tag of the jdp.

  icon = "path of the image.

  ........>

  It's worked for me.

• My hard drive crashed and he was replaced. However, Windows 7 Premium replaced instead of Windows Pro. I now need a product code for windows 7 Premium. Can you help me, please?

  Original title: product key

  My hard drive crashed and he was replaced. However, Windows 7 Premium replaced instead of Windows Pro. I now need a product code for windows 7 Premium. Can you help me, please?

  See instructions to reinstall the correct version:

  How to: What are my options for Windows 7 reinstall media?

• When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

  When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

  Legacy versions do not support the higher resolutions / poster of the retina. Refer to this:

  My UI elements appear tiny. | Error postal codes of Mylenium

  Mylenium

• Is there a way just to have one or two applications, for example first pro cc or the two sequels. But I see LL is Photoshop for 9.99 per month, is there a way I can get just first pro cc only for 9.99 or something like that?

  Is there a way just to have one or two applications, for example first pro cc or the two sequels. But I see LL is Photoshop for 9.99 per month, is there a way I can get just first pro cc only for 9.99 or something like that? I don't

  # Photography is one of its kind special promotion. There is no other package prioritized at a similar discount. You can get single app or CC full plans.

  Mylenium

• Creative cloud storage limit not sync with the management plan. 2 GB display on the application instead of 100 GB.

  Creative cloud storage limit not sync with the management plan. 2 GB display on the application instead of 100 GB.

  Hi Christian,

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• Is it possible to run splitview with two-mode applications landscape on iPad pro in portrait mode?

  Hello

  Is it possible to run splitview so that both applications are in landscape mode, while now the iPad in portrait mode?

  So basically, instead of apps side by side, it would be top apps down.

  I use goodreader to watch a video while surfing the web on safari. But when he was knocked down by side there are a lot of realestate lost on the side of the video.

  see you soon

  Unfortunately not. If I was a Pro too much it would be my favorite. Try using the comments link to suggest to Apple.

  http://www.Apple.com/feedback/

• Help adding a link to a Pro first of Flash video

  I created a video in Premiere Pro, and I want to add hyperlinks to a few words I added titles in Premiere Pro (I ask on this forum because I saw a similar question referred in this way).

  .

  In order to add hyperlinks functional, I created a couple of SWFs in the Flash CS4 IDE, which would serve as invisible buttons (if used movieclips) that the link to the respective sites via NavigateToURL.  After checking to make sure things were working with sovereign wealth funds, I dragged them in my first pro project Panel and added to the timeline occasionally when I need the links are available.

  Then I exported the FLV to Premiere Pro with Adobe Media encoder.

  The flash site I'm building using the Gaia framework, so I added the FLV as an asset to one of my pages of Gaia and all this load normally - the video and I see the bright sections, that I created to serve as clickable links.  Links within the video, however, do not work, and I didn't know if it was a problem of Gaia or if there's another step (or not) I have to take to make this work.

  (If there is another way to make it work, clickable links in a Premiere Pro video, I'm open to that as well).

  Again, I know that a lot of this Treaty, Premiere Pro, but I hope I can get help on AS3 forum since this is where the Premiere Pro forum led a similar question used Flash as a solution.

  Thanks for any response.

  I have Premiere Pro and its Flash capabilities. However, adding an application interactivity Flash would not otherwise. Simply create a transparent overlay on the video and add MouseEvent.CLICK listeners. In other words-, it is identical with buttons.

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• How are added to the HP Officejet Pro 8600 printing solution Center

  The center of printing solutions shows my Photosmart C5580.  No idea how to add an OfficeJet Pro 8600?

  Shlomi Hi and thanks for a quick response.

  I had hoped to add 8600 Solution Center as an HP upgrade / download link in the menu Wizard printer you mention using the icon, re - set the default printer for the "8600 Fax.

  He also changed the list of this menu screen to be only four: HP printer Asst (but does nothing when a click), Set Prefs, see what printing and the printer to customize.

  Previous menu, as you no doubt refers, had several printer features that included all submenu links functions, I used (including to scan a doc, preferences, etc.).  Frustrating...

  After uninstalling and reinstalling, tweaking, etc, I always have this quick menu by clicking on the icon of tune.  I have tried different methods of scanning as the right click on the printer in Control Panel devices, but the scanning from which lead to a horrible list of basic functions, a confusing list of formats, etc.

  Finally, I did a scan in the screen menu of the printer who made a point "scan" in the Start Menu, I right click it to pin that on the Start Menu, then created a new shortcut on the desktop with the path to him... and now the icon / printer works to get the menu scanning.  Phew!

  About the loss of the Solution Center is regrettable.  Very handy tool to do the various tasks and the refinements of a scanned document that do not exist in the limited functions / buttons on the 8600 scan menu results.

  At the same time and while I'm... To the laserjet subject large workhorse of HP LJet 1320, several other positions and all forums have problems loss of functionality after passage from XP to Win7.  I finally got all but one device works (PCL6/5th, printing on both sides, etc.), but the pilot is only 600 dpi quality close to the project, instead of the prior 1200 dpi (especially good for forms, thin fonts, etc..).  Which is just a discharge on the technology and support for the products that brought me as a customer to use HP in the first place.

  Thanks again for your reply and your suggestions.  Ready to try anything to solve the so-called reliable downloads / upgrades.

  Best regards...

• I get error code 0 x 80070035 applications after installing Office Pro Plus 2010

  Original title: install Office Pro Plus 2010 in error code 0 x 80070035

  Hello

  I installed office pro plus 2010 and applications, I get this error message. I can not save the e-mail settings outlook, using word, excel etc. It just keeps popping up - no other problems with the operating system. Running vista home

  Any suggestions? Thank you

  Thank you. I did this and then ran the installation repair and now works fine.

• Can we sell an application made in Flash Pro with some elements of Air incorporated inside?

  Hello everyone,

  I'm a musician for whom a developer makes a video player and swf in Flash Pro. I intend to sell it with a music album (and included in the sold package). The application needs of air to run--which means either users must install Air first on the computer then the player, or the elements Air, he needs are incorporated in it (the record player) when exporting in Flash Pro and it can work by simply clicking an .exe file.

  My question is: can I sell the Player version with Air elements incorporated inside or are there some conditions of licence that I need to mount? I saw there is a license that must be asked with Adobe, if we want to include the installer of Air in a package to sell, but here, it is not an installer which I want to include a few (webkit and stuffs) exported by Flash Pro itself.

  I think that some of you who had to develop applications for mobile as Flash games or may have the answer. A person of maybe Adobe?

  Thank you.

  Kind regards.

  
  

  Yes, you can sell your app with air incorporated.

• How to install Premiere Pro CC try 2014 instead of first Pro CC 2015 which promotes creative cloud Installer?

  How to install try first Pro CC 2014 and instead first Pro CC 2015 which promotes creative cloudInstaller?

  So the problem I have is typical.

  

  All I need is use previous version of first pro cc 2014

  
  Running Mac Os X El Capitan...

  Hi Edward,.

  1. click View PREVIOUS VERSIONS

  

  2. choose Premiere Pro CC (2014)

  

  Thank you

  Regalo

• In the generator of the App, I get "Activate the application" instead of downloads

  Hello

  I subscribed full CC and am trying to build an application in the App Builder.

  However after my application has finished building get invite him "Activate App" instead of download the app (Developer.ipa or distribution.zip).

  
  

  I deleted the App Builder and re-installed and connected with the creative journal Cloud in.

  
  

  Any suggestion would be appreciated.

  Thank you

  
  

  James
  

  For future reference to others find this thread, the account used was not subscribed to the creative cloud so there is no simple editing rights.

  Neil