Adding channel CJCS virtual/physical to existing task

Similar Questions

• adding channels to daqmx after conversion Express

  Hi all

  I am updating a VI I created a couple of years.  This is my first.  I used the VI Express DAQ.  I have received complaints about the computer hang up once in a while and thought it might be due to the Express.  So I used the LabView function to convert to individual tasks DAQmx.  Everything seems to work fine for the channels that were originally installed.  Now, we must add new channels to the reading.  Shot is high-level DAQmx icons in the main VI.  The second shot is the Subvi configuration of channel generated by the computer.  In AI voltage box you can see the channel, I'm adding, Channel 9.  Am I missing something obvious?  Thanks for the help.

  

  

  
  

• Is it possible to rename an existing task in Windows Vista Task Scheduler Library, in the computer management console?

  The 'Name' field seems to be greyed out on existing tasks, even if the other attributes of these tasks can be changed.

  Hi Casey,.

  Thanks for posting the question on the Microsoft Community Forum.

  Want to know how to rename a task into task schedular, I suggest that you try the steps mentioned below.

  a. in the Task Scheduler, highlight the task in question.

  b. click on export and choose a location to save the file (office is as good a place as any).

  c. click Save.

  d. in Windows Explorer, navigate to the location where you saved the file.

  e. you can then rename it as usual. Back in the Task Scheduler, click the import job.

  f. navigate to the renamed file.

  g. click OK.

  h. now highlight the original task (do not forget that there are now 2 tasks, one with the original)

  name and one with the new name), then click on remove.

  Hope the helps of the steps.

  If you have any questions/comments more on Windows post on the Microsoft Community Forum.

• Adding an additional CASE to an existing deployment of NAC OOB 4.7.3

  Hi guys,.

  If I am to add the certificate self-produced my new cases to the authorities of my CAM list existing certificate approved, it just will be added or it will replace the existing trusted certificate?

  Hi Adrien,.

  "Certification authorities" are the certificate of all the CAs root and also self signed certs of the trusts of the CAM case. So whenever you add a root/selfsigned certificate to this list, it is added to the list and does not replace any of the CERT. This link gives more information:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/45/CAs/s_admin.html#wp1092761

  Kind regards

  SOM

  PS: Please mark the same question if it has been answered. Note the useful messages. Thank you

• Maximum amount of disks that can be added to a virtual machine?

  Hello

  We are DPM configuration and we need a huge pool of disks and our EVA system allows us only to created a maximum of 2 TB LUN.

  Now, we are at the point were we only had SCSI ID 0:15 left to add a disk.

  What is the limitation of adding disks of virtual machines?

  Thank you

  Erik

  60 is the maximum: 4 * 15 devices SCSI

  SCSI controllers per virtual machine 4

  Devices per SCSI 15 controller

  Devices per virtual machine (Windows) 60

  Devices per virtual machine (Linux) 60

  http://www.VMware.com/PDF/vi3_35/esx_3/r35u2/vi3_35_25_u2_config_max.PDF

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• Duplicate the physical channel with virtual channel

  I accidentally created more global virtual channel with a single physical channel, for example:

  global virtual channel physical channel

  A0 vtc00

  A0 vtc01

  A0 vtc02

  My questions are:

  1. How can I change the virtual channel as follows:

  global virtual channel physical channel

  A0 vtc00

  A1 vtc01

  A2 vtc02

  2-How do I re-name/remove the virtual global channel, when it is not in the task?

  Thanks for your time, Dylan

  Hello Carisa,.

  I decided to go head re - install the DAQmx tonight and re-imported the right config file known about it.  So far, all global virtual channels are now under the management of devices and interfaces plus all unwanted virtual channels have disappeared - Yippee!  I tried to browse a unit test to make sure that the virtual channels work too, they seem good.

  Finally, the issue is resolved.  I would like to say thank you to you for you and Roberto Bozozlo have spent the time to help me through this.

  Sincerely, Dylan

• Add _boardTempSensor_vs_aignd to the existing task

  Is it possible for me to create a virtual channel for Devx/_boardTempSensor_vs_aignd?  If I try to do this in MAX, I get only the possibility of using the ai0-15 channels.  I can create virtual channel in BT using Create Virtual Channel, but when I try to add additional channels to the task with DAQmx create a task, I get an error for the task existing does not in MAX.

  The device is a PXI-6250 and I'm reading the temperature sensor embedded as well as a few other analog voltage.  Collection of data from analog in tension must be continues to stop and start the task is not really an option.

  Any help would be greatly appreciated.

  I'm sure 6250 M series has embedded temperature sensor.  It is accessible on the tab calibration data in MAX under the current temperature.  It is also available under a node property of calibration in DAQmx.  I also read the string directly by wiring in Devx/_boardTempSensor_vs_aignd to the VI DAQmx create Virtual Channel.

  As I understand it, it is impossible to combine internal and external channels in a task.  It's a little disappointing.  I think I found a software solution, but it's far from ideal because it periodically interrupt my continuous measurement.

  Thanks for your help.

• How to modify a Virtual Machine DRS existing group?

  Hello

  I use DRS-rules to place virtual machines to a host selected in a Cluster group.

  The poblem is that I did not find methods to change (add new virtual machines) to an existing group of DRS 'Virtual Machine '.

  As far as I know, the configuration is stored in $ClusterView.ConfigurationEx.Group

  Any ideas?

  Thank you!

  Hi Willibald,

  I did some research in the VMware vSphere SDK and made two functions Get-DrsGroup and VmToDrsGroup Add to add one or more virtual machines to a ClusterVmGroup. Some examples of how to use these function exists in the code. If you have added these features to your PowerCLI session, you can use Get-Help to get information about these functions. And also for the examples. For example Get-Help add-VmToDrsGroup-full.

  Function Get-DrsGroup {
  <#
  .SYNOPSIS
  Retrieves DRS groups from a cluster.
  
  .DESCRIPTION
  Retrieves DRS groups from a cluster.
  
  .PARAMETER Cluster
  Specify the cluster for which you want to retrieve the DRS groups
  
  .PARAMETER Name
  Specify the name of the DRS group you want to retrieve.
  
  .EXAMPLE
  Get-DrsGroup -Cluster $Cluster -Name "VMs DRS Group"
  Retrieves the DRS group "Vms DRS Group" from cluster $Cluster.
  
  .EXAMPLE
  Get-Cluster | Get-DrsGroup
  Retrieves all the DRS groups for all clusters.
  
  .INPUTS
  ClusterImpl
  
  .OUTPUTS
  ClusterVmGroup
  ClusterHostGroup
  
  .COMPONENT
  VMware vSphere PowerCLI
  #>
  
    param([parameter(Mandatory=$true, ValueFromPipeline=$true)]$Cluster,
          [string] $Name="*")
  
    process {
      $Cluster = Get-Cluster -Name $Cluster
      if($Cluster) {
        $Cluster.ExtensionData.ConfigurationEx.Group | `
        Where-Object {$_.Name -like $Name}
      }
    }
  }
  
  Function Add-VMToDrsGroup {
  <#
  .SYNOPSIS
  Adds a virtual machine to a cluster VM DRS group.
  
  .DESCRIPTION
  Adds a virtual machine to a cluster VM DRS group.
  
  .PARAMETER Cluster
  Specify the cluster for which you want to retrieve the DRS groups
  
  .PARAMETER DrsGroup
  Specify the DRS group you want to retrieve.
  
  .PARAMETER VM
  Specify the virtual machine you want to add to the DRS Group.
  
  .EXAMPLE
  Add-VMToDrsGroup -Cluster $Cluster -DrsGroup "VM DRS Group" -VM $VM
  Adds virtual machine $VM to the DRS group "VM DRS Group" of cluster $Cluster.
  
  .EXAMPLE
  Get-Cluster MyCluster | Get-VM "A*" | Add-VMToDrsGroup -Cluster MyCluster -DrsGroup $DrsGroup
  Adds all virtual machines with a name starting with "A" in cluster MyCluster to the DRS group $DrsGroup of cluster MyCluster.
  
  .INPUTS
  VirtualMachineImpl
  
  .OUTPUTS
  Task
  
  .COMPONENT
  VMware vSphere PowerCLI
  #>
  
    param([parameter(Mandatory=$true)] $Cluster,
          [parameter(Mandatory=$true)] $DrsGroup,
          [parameter(Mandatory=$true, ValueFromPipeline=$true)] $VM)
  
    begin {
      $Cluster = Get-Cluster -Name $Cluster
    }
  
    process {
      if ($Cluster) {
        if ($DrsGroup.GetType().Name -eq "string") {
          $DrsGroupName = $DrsGroup
          $DrsGroup = Get-DrsGroup -Cluster $Cluster -Name $DrsGroup
        }
        if (-not $DrsGroup) {
          Write-Error "The DrsGroup $DrsGroupName was not found on cluster $($Cluster.name)."
        }
        else {
          if ($DrsGroup.GetType().Name -ne "ClusterVmGroup") {
            Write-Error "The DrsGroup $DrsGroupName on cluster $($Cluster.Name) doesn't have the required type ClusterVmGroup."
          }
          else {
            $VM = $Cluster | Get-VM -Name $VM
            If ($VM) {
              $spec = New-Object VMware.Vim.ClusterConfigSpecEx
              $spec.groupSpec = New-Object VMware.Vim.ClusterGroupSpec[] (1)
              $spec.groupSpec[0] = New-Object VMware.Vim.ClusterGroupSpec
              $spec.groupSpec[0].operation = "edit"
              $spec.groupSpec[0].info = $DrsGroup
              $spec.groupSpec[0].info.vm += $VM.ExtensionData.MoRef
  
              $Cluster.ExtensionData.ReconfigureComputeResource_Task($spec, $true)
            }
          }
        }
      }
    }
  }
  

  Best regards, Robert

  I changed the error handling logic in the Add-VMToDrsGroup function.

  Post edited by: RvdNieuwendijk

• Adding a new host to the existing cluster

  Hi all

  The existing cluster has a connected SAN. Should what precaution I look forward to add a new host to the existing cluster? I did research that we should physically disconnect the HBA before adding, I don't know what it is to be honest.

  Any help / idea would be highly appreciated.

  Concerning

  VDZ wrote:

  Thanks a lot, guys

  Please, how can one more thing I change the host name?

  Appreciated all your help

  Kind regards

  Hello

  Once the host is already in the vCenter inventory, you cannot change it, you must disconnect host to vCenter, delete the inventory and add it again using a different name,.

  for example, if you specify IP during the connection wizzard, it seems in vCenter inventory under an IP address, if you want it to be visible as a hostname or a domain FULL, during the wizard name you used its hostname or FULL domain name

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• Unable to create placeholder virtual machine already exists

  We try to change a test of Protection Group to a new group of Production and I get the following error on some of our virtual machines that are not protected.

  Protect the VM cannot create the VM space reserved on the recovering site: machine virtual recovery could not be created: the

  name ' already exists.

  It's VShere 4.1 reproducing with recover Point separator 3.2

  Any enlightenment is appreciated.

  I have (had) the same problem. It seems that there is a bug in the system. When you delete an old or protection group test it does remove all the place SRM LUN support files.

  My fix, browse the place holder SRM datastore, after the withdrawal of your protection group, remove while flying over the records in the data store. After that, check the inventory of the VM, if all protected servers are still right click on each one and select Remove from the inventory.

  Once all the old data is deleted you can re - create your protection group and all servers must be added without problem. If you still have trouble to re-post here and I'll try to help.

  Thank you

  Graham

• Channel of the DAQ (SMU-4498) task order

  I have an SMU-4498 for which I generate an acquisiiton task programmatically. When the task is created channel order is not necessarily in ascending order of channel number.

  My question is if the DAQ card will return the data in the order in which I defined the task or channel order?

  Thank you

  It seems that the answer is that channels must be specified in the order, when creating a task.

• Change the channel for Virtual Wifi Miniport Adapter

  Hello!

  I was experiencing problems of interference when using the module of Virtual wifi miniport, and I would like to know if there is any way I can change the channel on the v-wifi is bradcasting?

  THX!

  Lee

  Well, I tried to find the latest driver for my card, I could find anything to the atheros website (what gives?).

  Win 7 told me I got the latest driver, but I wouldn't trust windows update, as they said that my ethernet card was up-to-date (see 7.04) and when I went on the Realtek site, driver to v.7.23...

  Anywho! I was not able to change the channel for the ad - hoc connection. I tried the connection with a PC and still cannot connect (so not a problem related to Mac).

  I don't know what is happening with the miniport module or the wireless card (I tried different settings in properties and the Advanced Options tab, as power management), but it just would not work. So I got this router, and everything works fine.

  This is!

• Adding a VDI induction to an existing deployment of vSphere

  We are vCenter Standard running in a clustered environment two blade HA/DRS vSphere. The cluster currently manages 15 VM, a combination of Windows and vApps VMware servers. Can we add ~ 6 VDI Office and/or a deployment of the that vCenter Server existing workspace / vSphere environment?

  Such a structure is not recommended for large scale / production indeed.

  But given the small scale given use case, you should be sure to move forward and avoid any involvement technique, provided sufficient resources CPU/memory/storage/and Ethernet is available and storage network/e/s bandwidths are not affected even under maximum use.

  In your case, I suggest to create pools of resources for vSphere and control resources shared with wisdom and deploy VDI virtual machines in a separate pool of resources. If there is a provision for the uplink network dedicated to the virtual machines, which should be put to use.

  Hope this helps

• How to create the new virtual machine vm existing in the data store on ESXI

  I have ESXi and couple of virtual machines.

  I have the vsphere client on Windows 7.

  I then deploy the ovf from the vsphere client vm and it began to import my VM 30 GB.

  In the morning, I realized my vm with a vmdk file file has been transferred in the data store

  But I couldn't see any virtual computer.

  Now I don't know how to turn on this vmdk file that is in my data store

  @King_Robert

  It's a very bad habit of yours to just copy and paste content created by someone else, without even mentioning the source (http://www.mustbegeek.com/create-copy-of-existing-virtual-machine-in-esxi-server/)

  André

• Creating virtual machine with existing data

  Hi all

  I have virtualized my almost all servers except the one and only one file server.  I'm under vsphere 4 with 2 ESXi hosts and a 2000 Eternus model 100 SAN and using Veeam 6 B & R

  Current configuration

  Physical server with 2 network cards

  1 NETWORK LAN card

  1 SAN NETWORK card using MS iSCSI initiator

  Windows 2003

  There are 2 volumes on my SAN which is connected via the MS iSCSI initiator containing the data for the file server.  Server file sharing (NTFS) files stored on the San, and they have a lot of NTFS permissions on files and folders (approximately 1.5 TB of data).

  Ideal configuration

  1 virtual server

  1 vNIC to LAN

  2 volumes of SAN share via the server

  Windows 2008 r2

  My question

  Can I just add volumes to vsphere, create a virtual machine, add the two volumes of the virtual machine as 2 hard drives, the actions of installation and do with it?  I wonder where the permissions are checked and if these measures can be made without wiping the volumes.  I don't have another 1.5 TB of free space on the SAN.  I have a Netgear NAS I use as a target for backup if necessary but I prefer not to have to move the data if it is not needed.

  I hope that I have covered all my bases to make this easy to understand situation and we hope to meet .

  Thank you

  Welcome to the community - Yes, you would be able to present the NTFS on the computer virtual hosted on your server using a RDM (Raw Device Mapping). Permissions on NTFS volumes are stored in the NTFS file system-