adding channels to daqmx after conversion Express

Similar Questions

• call by reference and physical channel OR DAQMX

  Hello

  I call a VI of reference and one of its entries is a physical channel OR DAQMX.

  Normally when I call the VI (no ref) control of the physical channel OR DAQMX fill itself with a list of detected devices / channels.

  Still by reference it does not work because I'm the appellant on a server of VI. He shows me the channels on the local computer instead of the remote computer.

  How will you address the list of physical channels OR DAQMX on a remote machine?

  Here is an excerpt of how find my DAQ card by searching all DAQ hardware in the system, and then query string types I want. Note that this must be running on the remote system. Perhaps could you run on the remote system and use the TCP/IP, Messaging Protocol to transfer the results?

  Charles

• Error after conversion or the copy of the label

  Not to mention that nodes of "cloned" property that disappears, seemingly solved in Labview 2012 (SP1), I have also a problem with the bewilderment of labels after conversions or copying.

  The problem occurs at least in the following situation:

  1. There is a property of a control node.

  2. the control is defined in a 'Type Def'.

  3. a label is attached on the right of the property node.

  4. the location of the label in the 'Type' Def is different (top-left, for example).

  5. to create the bug or the source is converted (for example Labview 2011 2012 Labview) or the property node is copied between sources.

  6. the label of the node property converted/copied now has moved to the top, above the property node.

  In Labview 2012 the solution for "cloned" property disappears nodes fixes also bug of bewilderment label for nodes of property.

  Moving labels can be quite annoying when you have relatively compact code in of many multiple stacked sequences and event handlers.

  ---

  I also had a separate problem with the location of the label once the font of labels is changed / converted, but have not yet checked if this still happens in 2012 of Labview.

  
  

• During a conversion attempt has us page to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  During a conversion attempt a webpage to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  Hello

  We could not see the attachment. Let me tell you how you can attach the file.

  1 - Select the icon of the image of the top toolbar.

  

  2. then click on "select a file".

  

  3 - Select the image you want to download.

  

  4 - Click on "insert image".

  

  I hope this has been helpful.

  Thank you!

  Shivam

• All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  I run FrameMaker unstructured 12 and FrameMaker 11 (for use with only the heritage project files) on a Win7 PC. The chapters in my FM11 file book for guide increment a new product user normally in FM11, but something bad, after you save the formatted FM 12 FM 11 project files.
  The book file includes:
  -Product Guide Cover.fm
  -Product GuideTOC.fm
  -Product GuideLOF.fm (list of Figures)
  -Product GuideLOT.fm (list of Tables)
  -Product GuideContent.fm (chapters 1-10) - book files dialing properties: Chapter 1 (digital)
  -Product GuideIX.fm (Index) (Chapter 11) - book files dialing properties: Chapter 2 (digital)
  
  Note: The chapter headings (e.g. 1 - Introduction, 2 - Specifications and so on) in the product GuideContent.fm and GuideIX.fm files are in the format paragraph Designer like: (the Auto-Numbering Format enabled) H: < n + > \t
  However, when I update the book, the Index seems formatted as Chapter 1 instead of Chapter 11. It seems that the conversion to FM 12 messed autodial in the product file GuideIX.fm, so that the only way to increment the value would be to manually update the building blocks in the file to H: IX.fm \t H: < n + > < n = 11 > \t (which I do not). Any suggestions would be greatly appreciated!

  Thank you - Randall basin

  Hi Ran,

  It's for anyone finding the subject, given that you and I come to chat with a screen sharing...

  After watching your files, the "chapter number" are really only section numbers, with all 10 of them in the same file FM. That means that really impossible to use the <$chapnum>for many of them and the index.

  In most cases, you would be still able to use the Fm 5.0 manually counting technique paragraphs title with an indicator of the series and the counter (e.g. H:), but you also have a number of positions within blocks of text not included in the stream.

  This seems to be your address update index position correctly.

  So, the only way to get the appropriate index number is to control it manually. You have at least 3 choices:

  1. Enter it manually
  2. Manually enter the AutoNumber box for the index
  3. Enter it manually in the numbering section of the dialing properties tab.

  However, all these things are extra bandages on top of your existing bandages, and I prefer to see the problems resolved instead of the 3 'Hacks' I have provided.

  For the sake of closure, please check the question if this seems to be specific for you.

  Sorry for the bad news (ish)!

  -Matt

• Converter to keep the primary Partitions after conversion.

  Hi all

  So we just started to use the converter for P2V, its an impressive tool. I noticed that his change of level primary logical partitions to drives. Not a huge problem, but if I add space on the logical drive he immediately wants to convert it to a dynamic disk. Dynamic disks is something of normally, we don't use in our environment. I ran through by converter some times, is there something I'm missing? We took the latest version - I would add that this server physical I have set up to test the converter in our laboratory.

  

  Before the conversion on the physical server.

  

  After conversion on VM.

  

  Thank you

  Javier

  Hi Javier,

  Unfortunately, it is a long-standing problem in the converter, but it has never been highly prioritized in order to process and fixed. I guess the assumption was that "it doesn't hurt" to have logical partitions. This is the first time I've heard that there are real problems - additional free space at the end cannot be used unless that switching to dynamic disks. We must need to revisit this bug again and hiérarchisera as it accordingly.

  As a solution, I would say you can resize volumes as part of the conversion process - you can add free space on each volume in the conversion wizard and would not need additional resizing after that. I know that's not a real problem, but it might be enough for your case.

  Kind regards

  Ivan

• I can convert pdf to word format adobe acrobat, DC but my version of word is not correct because after conversion, fonts and lines are not correct in the original pdf document.  I am currently using version 6.1 of windows 7 service pack 1 build 7601. Is -

  I can convert pdf to word format adobe acrobat, DC, but my version of word may not be correct because after conversion, fonts and lines are not correct in the original pdf document.  I'm currently using version 6.1 of windows 7 service pack 1 build 7601 Home Premium. Is it possible that I might have to upgrade my windows 7 in order to get good conversions of PDF files in word files?

  No, it won't be linked to your version of Windows. Probably, you wait too long. Conversion cannot be perfect except for the files very easy.

• After conversion &amp; economy in my file, word doc is blurred

  Why after conversion & economy in my word doc file is scrambled?

  Hi mackibee,

  How the PDF was created? If it was created by an application third (i.e. something other than an Adobe app), the file may not have the necessary information to ensure a clean transformation. Please visit: Adobe ExportPDF Will convert both text and form... | Adobe community.

  You may have more luck if you turn off OCR, as this document described: How to disable the optical character recognition (O... |) Adobe Community. But this option is not preferable, if the PDF file has started as a scanned document, OCR is necessary to convert a text image into editable text.

  Best,

  Sara

• strange color (red &amp; green) spots appear after conversion of RAW files to JPEG, someone knows how to fix this?

  Strange color (red & green) spots appear after conversion of RAW files to JPEG, someone knows how to fix this? Thank you.

  Thank you all, I use rather than ProPhoto RGB sRGB and it's better now. Thanks again.

• Property node "DAQmx system" global channel does not read changed MAX global channel of data after the 1st round

  I use the property system DAQmx node to read all the data the scale for global for thermocouple in MAX I use MAX 4.4, LV7.1.1, with a SCXI chassis in a PXI-1050 chassis. It seems to read the properties very well on first run. However, if you then change a channel property overall Max (for example a ladder or a type thermocouple factor) and it saves to the MAX, and then runs again the property node, it still read old data Max. To get it to read the changed data, it must close the VI, and then reopen it. It's painful when you recalibrate a vast set of thermocouples using MAX.

  Is it possible to force the node of system DAQmx property to reread MAX whenever it is executed, without closing his VI?

  See attachment. Run called standalone VI... PRINCIPAL. See instructions on the VI.

  Thank you

  Tim

  Hi Tim,.

  Your main VI has not been updated is because you do not clearly the task after every time you call the DAQmx property node.

  Attached is a modified version of your code that works. I just added the Task.vi clear DAQmx in the FindChanProps.vi.

  Best regards

  Faris has

• Questions with more than 16 channels in daqmx

  I've implemented a .VI (from the pieces of the help on the forum) that I use with the NI USB-6225 to collect and record anywhere voltages 1-30 or more 4-20mA sensors (pressure, linear voltage,... etc.). I tried to implement the .VI to make it user-friendly so that a person could name each channel, as well as to set the duration record and frequency (ie the number of samples).  After the data were recorded, the .VI generates a time-stamped PDM file, a timestamped LVM file as well as a time-stamped LVM file for an average of all voltages on each channel.

  The problem, I noticed that whenever I have more than 16 channels activated, the saved values for channels 17 and higher pressures are wrong.  For example, the output voltages of 1 to 16 channels of a tension of 1.0 to 5.0 (which is expected) and 17-30 channels is negative or very small (0.100 volts).  I know that the NI USB-6225 is working properly because I created a simple .VI which simply uses the DAQ Assistant ouptut 30 channels on a waveform graph and all channels of reading in the range I'm waiting (1.0 to 5.0 volts).

  To me, it seems that there must be something in the DAQmx (as opposed to DAQ Assistant) I use my .VI who questions whenever I try to save more than 16 channels.  I just don't understand enough of labview to understand what may be the cause of this problem and I was hoping someone could point me in the right direction

  As you have not joined in the work programme, it is impossible to tell what you did differently. In this program, you do not specify the configuration of the inputs (simple nerve or diff).

  p.s., The program is bad need of major cleanup. Keep the program to a single screen. Simplify.

• How can I set a channel IEPE DAQmx and the other not?

  Hi, guys!  I am a first year student in labview. I meet a problem and need your help.

  In my DAQmx data acquisition system, I must acquire the data of two channels at the same time. And a channel IEPE, another does not need. You can open the example in the following location: C:\Program NIUninstaller Instruments\LabVIEW 2014\vi.lib\addons\Sound and Vibration\Example Support\DAQ\DAQmx\Frequency Analysis\Dual channel Analysis\Baseband FRF (DAQmx AI and AO) .vi. In the example, you must configure both of them to stage IEPE or not. There is no more information that I can find. And I have no idea to solve this problem.

  Thanks in advance
  concerning

  

  What you have tried after the update.

  -You can list down all channels using the as shown in http://digital.ni.com/public.nsf/allkb/CC501982F91AFA548625735D00547AC2

  -You may find the information and links in this forum: http://forums.ni.com/t5/LabVIEW/Setting-up-IEPE-settings-DAQ-MX-task-for-multiple-channels/td-p/1728...

• Adding channel CJCS virtual/physical to existing task

  Hello

  I have a NI 9211 TC modules that I use to acquire temperatures through LabVIEW 2013 SP1, I have an existing task created in MAX.  I want to follow the CJC temperature sensor as well.  After looking at several positions, I discovered how to assign the physical channel hidden in a virtual channel in LabVIEW and then view the CJC value.  BTW...  Where there is under good which shows how to do this for the cDAQ series... find the 'AI Temp sensor built' is not clear (look under "analog EntrΘe, more").  But that part works now.

  -->, I want to add this channel CJC to my existing job, but I get an error.  See CJC1.vi

  Or, as an alternative, I would like to acquire the CJC temperature and acquire temperatures 8 other channels and then combine them somehow for display, recording, etc.

  Note: I want to keep the data in the format of the waveform, so they work as part of a broad data acquisition program that I have.  And I want to continue to use the existing task as it contains the calibrations (via the wizard of Calibration MAX).

  Here is the error that occurs when I run CJC2.vi with the active disabled code block.  (sometimes not is displayed after you press the Stop button)

  Error-200072 occurred at .vi:7050002 DAQmx Create Channel (I-temperature-built-in sensor)

  Possible reasons:

  Duplicate the layers in the list of physical channels are not supported by this unit.

  Channel name: _cDAQ3Mod1/_cjtemp
  Dual channel: cDAQ3Mod1/_cjtemp
  Physical channel: _cjtemp
  Feature: cDAQ3Mod1

  Name of the task: task of DAQ3

  Attached files:

  CJC1.VI<-- shows="" combined="" code="" and="" it="" throws="" the="">

  CJC2.VI<-- shows="" how="" i="" acquire="" and="" display="" data="" from="" 8-channel="">

  CJC3.VI<-- shows="" how="" the="" cjc="" temperature="" works="" by="">

  Now, how to combine the two?

  Thanks for the help,

  Derek

  Knowledge base seems to be a little confused right now because it only shows the node property for channel playback of strength. It's the correct property to read from a channel of CYC while you use it, but we must also set the CJC channel as an active channel first. The following snippet is the right way to do this in the context of this thread.

  Please note that you must use the built-in CJC source for that to be applicable.

  

• Toshiba TL968G - three television channels goes away after a while

  Hello

  I have a problem with my TL 968 G.

  Last week, he deleted my last three television channels in my channellist by itself.
  I thought that it is a problem wit the TV channels, but after a new search, they are back, so that they are still on the air.
  I recreate my channellist with ToshibaEdit. The channels are back.

  A few days later, they left again.
  Always the same three channels have been removed, the 'three in my list of channels.
  I have only 23 Channels programmed, then "too channles" could not be the problem.
  I searched for software update for my TV, but its not available.

  Now, the channesl are deleted 30 seconds after I recreated the list strings with ToshibaEdit.
  I change channels, all three Channels are in 30 sec later they're gone...

  Everyone knows the problem?
  Any solution for this?

  Thank you

  Hello

  Try to reset the default TV and do a full scan channel.
  Then try to order strings directly in the TV Setup menu.

  By the way: Here you can find detailed instructions for the use of the channel list TV ToshibaEdit editing software for PC
  https://portalcp.toshiba-tro.de/documents/10781/6dd55351-6749-41e7-8d21-cb5b8b7b07f9

• How to make a good UI for the selection of the channels with DAQmx

  A lot of my Labview programming accompanied verisons them previous LabVIEW (pre Labview 7), and there are a ton of new features I am digesting (currently using Labview 8.2).

  My question is (in general), how people schedule their user interface for the selection of channels and others when using hardware DAQmx?  What I have in mind is a system compacDAQ with a number of modules.  The user would be able to choose which channels to watch.  With the help of MAX as part of this process seems counter intuative and somewhat static (yes I know you can change out there, but it feels more like something you would use for something that doesn't really change much).  I wish that all the UI within the VI.

  Programmers use the task of creating screw for this or something else?

  Thanks in advance.

  ChuckNRC,

  I tend to avoid using MAX and create all my channels/tasks using the DAQmx functions.  There are also having some DAQmx features that allow you to save/remove channels, tasks and scales to MAX.