Adding for Cert for WebVPN Anyconnect

Similar Questions

• Based CERT auth with AnyConnect

  Hello

  We recently bought a certificate for our ASA to use on the external interface when connecting to get installed AnyConnect or simply use webvpn. I added an identity cert and cert CA as well, and then he made the default cert for the external interface. This worked very well.

  Now, we want to use the authentication certificate for our AnyConnect (as well as the RAY that is already working). We have an internal cert server of Microsoft, that we want to use for this purpose. Question is... How can we use the cert public bought on the external interface for webvpn and AnyConnect installation and at the same time to use the 'internal' cert for authentication of the VPN client? Is it still possible?

  I have already created an internal cert and installed on the asa with the cert CA of our internal server. We took the version 8.2 (2).

  I hope that someone, with a little more knowledge about it than me, can help

  Thanks in advance,

  Rasmus

  Rasmus,

  Debugging for the failure of the attempt to please, however you normally try to do.

  Can you try with and without ssl-auth... certificate?

  Marcin

• Type of cert for ikeV2 anyconnect

  Hello world

  I created the CSR for anyconnect IkeV2.

  When I ask the seller to cert that I should ask them what type of certificate that I needed for IkeV2?

  We do not want users to use ssl as https://xyz.com and to connect and download the client.

  We want machine pre installed with anyconnect and profile users and connect using IkeV2.

  Concerning

  Mahesh

  Each certificate provider has their own list of choices. Many understand Cisco among their choices. that is to say:

  http://www.InstantSSL.com/SSL-certificate-support/csr_generation/SSL-CER...

  In General, a standard server certificate just because we don't do a lot of fancy with it - just check identity. CN in the CSR must match the FQDN in this case...

• ASA 8.4.3 install the certificate for webvpn without CSR

  Hi guys,.

  I have spent a lot of time trying to install our wildcard certificate in the ASA for use with anyconnect, but was not permanently misserably. I red a lot of messages, but don't really know what I'm doing.

  Our Web server, I got DigiCertCA.crt, star.mycompany.com_cert.pem and star.mycompany.com_key.pem. The certificate is a certificate wildcard for mycompany.com.

  The DigiCertCA.crt file is the certificate called "DigiCert High Assurance CA-3" on the Web site: https://www.digicert.com/digicert-root-certificates.htm
  with the series "0A5F114D035B179117D2EFD4038C3F3B".

  On the SAA, I checked that I have no present trustpoint. Orders: "sh ca crypto certificates" and "sh crypto ca trustpoints" give no output.

  OK, so lets get started to set up and are having problems:

  ASA (config) # crypto ca trustpoint star.mycompany.com

  Domain name full webvpn.mycompany.com ASA(config-ca-Trustpoint) #.

  ASA(config-ca-Trustpoint) # Terminal registration

  ASA(config-ca-Trustpoint) #-revocation checking no

  Output ASA(config-ca-Trustpoint) #.

  Authenticate the crypto ca ASA (config) # star.mycompany.com

  Enter the base-64 encoded certificate authority.

  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-

  # CONTENT DigiCertCA.crt #.

  -CERTIFICATE OF END-

  quit smoking

  INFO: Certificate has the following attributes:

  Fingerprint: c68b9930 c8578d41 6f8c094e 6adb0c90

  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "star.mycompany.com" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully

  ASA (config) # crypto ca certificate star.mycompany.com import

  ATTENTION: Registration certificate is configured with a complete domain name

  that differs from the fqdn of the system. If this certificate will be

  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: webvpn.mycompany.com

  Enter the base 64 encoded certificate.

  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-

  # CONTENT star.mycompany.com_cert.pem #.

  -CERTIFICATE OF END-

  quit smoking

  Could not import the certificate-

  Certificate contains a general practitioner of the device public key

  for point star.mycompany.com trust

  ERROR: Cannot analyse or check the imported certificate

  ASA (config) #.

  Please help me! I'm not a guru with certificates.

  Kind regards

  Tom van Leeuwen

  Tom,

  you create a container PKCS12 which includes certificates, and CA key.

  I don't know how to do with linux, no idea with Windows

  Michael

  Please note all useful posts

• Portege R830 - need to value added for Win8 64 bit package

  Hello

  I have a Portege R830-1 and I am very disappointed with Toshiba.

  I have the function keys working on the first month of windows 8. whenever a windows update broke that for me and after that the kys function no longer works.

  I reformatted the pc, I have tryied all what I found on the web, but the only thing I found is the added value of the package or the memory card controller is missing. I tried to install and reinstall all the versions, but it seems to be 32 bit and no 64-bit version. So I have to wait for the next release of PVAT

  Windows 8 was released many months and I think that the problem is not difficult to solve.

  Is it possible to return the function keys to live?

  Hello

  This 64-bit of the VAP to win 8

  [Added value package 1.6.0130.640205 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 7399 selSh ortMod = 3363 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 6 & ID = 84829 & OS ID = 42 & driverLanguage = 42]

  the VAP is not mobile specific utility.
  You can take this software that has been published in other facilities too.

• Question about the update of value added for the Satellite P100-160 package

  Hello

  I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
  I downloaded and unpacked. It contains three options:
  2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

  I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

  Can someone advise please that I should use?
  Thank you!

  Hi guys

  Value added package contains many different Toshiba and utility tools!
  Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
  This number can be checked on the bottom of the unit.

  I visited the page of the Toshiba driver and checked the details.
  You will find an info that this package installs a range of important public services.
  -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -TOSHIBA PC Di

  In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again

• Create self registered certificate for WebVPN

  I am creating a certificate automatically registered for use in our laboratory for tests on years ASA5520. A tech Cisco has helped me create a time and I don't remember all the steps on how this was done. Can anyone help with this?

  You can create a new trustpoint on the SAA, which is configured to

  "self registration" like that.

  1 configure the trustpoint. (You can have a multiple CN for IP)

  address and a FULL domain name, which will allow to connect via IP address or

  hostname without a cert warning)

  wb5540-FO (config) # sh run cry ca tr selfsigned

  Crypto ca trustpoint selfsigned

  registration auto

  name of the object CN = 10.10.1.1, CN = wb5540 - FO.cisco.com

  Configure CRL

  2 register the trustpoint

  Crypto ca enroll selfsigned

  % The FQDN in the certificate name will be: wb5540-FO

  % Include the serial number of the device in the name of the topic? [Yes/No]: n

  Generate a self-signed certificate? [Yes/No]: y

  wb5540-FO (config) #.

  3 see the obtained certificate

  wb5540-FO (config) # sh cry ca REB selfsigned

  Certificate

  Status: available

  Serial number of the certificate: 31

  Certificate use: general use

  Public key type: RSA (1024 bits)

  Name of the issuer:

  host name = wb5540-FO

  CN = 10.10.1.1

  CN = wb5540 - FO.cisco.com

  Name of the object:

  host name = wb5540-FO

  CN = 10.10.1.1

  CN = wb5540 - FO.cisco.com

  Validity date:

  start date: 13:47:37 UTC January 25, 2006

  end date: 13:47:37 UTC January 23, 2016

  Linked Trustpoints: selfsigned

  4. to assigned, whether used for SSL configure it like this:

  Trust selfsigned SSL-point

• Web security for devices anyconnect solution

  Hello

  can someone point me to some security solution from Cisco for mobile (also) with anyconnect installed so I can manage security policies even if they are connected from a remote location?

  AnyConnect desktop clients the possibility to use Security Cloud for Web (CFS) connector.

  For mobile devices (iOS or Android) you are limited to a method, such as disabling split tunnel and force all traffic to their thinking your head of VPN network, which in turn has a connector of CWS or other motor control (for example, a module of firepower or the an ESA WCCP) in place and active.

  The other option for mobile devices is to implement their security policy via a tool Mobile Device Management (MDM) of third parties.

• AnyConnect image in Flash for the Anyconnect customer login

  Hi dear.

  Is it necessary to have an Anyconnect image in the flash of the SAA for Anyconnect users connect to it.

  I had a user who got to MAC OSX and tried to connect to a firewall using Anyconnect but failed because the MAC OSX Anyconnect image was not uploaded to the firewall. However, he could successfully connect to another firewall, in which the image was present. So it will be also the case for Anyconnect for Windows. And also does it really matter which version of the image is present in the flash as long as you have the picture for this operating system platform

  Thank you :)

  Any valid image for the client OS will suffice.

  If the version of the client is more recent, they will keep it.

  As you may have noticed, if none is available (and specified as one of the AC images), the client will not be able to connect.

• Cisco 1700 Setup as a hub for Cisco Anyconnect VPN

  The complete configuration for the router is attached. Additional configuration includes forwarding port 443 (the two tcp/udp), udp 4500, udp 500 and udp 50 to 192.168.1.20.

  Objective: Configure Cisco 1700 router as a VPN server, which a Cisco Anyconnect VPN client in. The VPN server is behind a NAT.

  Question 1: The Cisco Anyconnect client pulls its set of configuration of the router? I just need to point to the correct IP address and hit connect and it will do the rest? If not, what additional client side configuration must be done? I noticed, it tries to connect on port 443 to my router, but I don't really know why and I know that my router is not listening on this port, so I know I'm missing something:-D.

  Question 2: What are the features specifically include easy vpn server? I am confused as to exactly what it is. From what I can tell when you configure easy vpn server you simply set up a regular VPN.

  Question 3: Cisco Easy VPN remote has something to do with Cisco Anyconnect or they are completely distinct?

  Sorry for the newbie questions. It's really hard to understand the different systems and features on it and most of the examples I found dealt with the VPN router to router rather than configurations just for computers of end users, but I'll be the first to admit that I am new on this hahaha.

  Thanks for your help.

  PS: Any comment on the misconfigs are welcome. I'm still trying to understand fully exactly what each command does.

  Grant

  Grant,

  AnyConnect can do SSLVPN or IPsec (with IKEv2), ezvpn is all about IKEv1, it won't work.

  There (part 3) customers who will be able to connect to ezvpn, as well as the former customer Cisco VPN, but AC is not.

  BTW... it's not 50/UDP, this is IP protocol 50 (or sometimes 51) - ESP (or AH).

  You don't have TCP and UDP 443 for IPsec, but you may need them for SSL.

  And seriously... series of 1700? Wow, this is a 'retro' kit :-) Support ended 6 years ago.

  M.

• Does anyone know if the software for Nikon d5500 has been added for using LR?

  Hello.. I'm shooting with a Nikon D7000, which is a bit too much for me because I need something that is more entry-level and was interested in purchasiing a Nikon d5500 has been added and was doing research on reviews of the camera when I came across this:

  Any computer is nothing without the software. Currently, all digital cameras are is another computer, but able to capture light and process that captures an image. Once captured, we all end up by using a form or another software. This is built into the camera and is transparent since we use it, as all software should be. BUT, I want specifically to use ADOBE LIGHTROOM products to be precise. This camera and its NAVE format for RAW images is a total loss, if you want to use Lightroom. Nikon and Adobe work together as Microsoft and Google... all to the loss of the customer. I would return the camera if I could and buy another brand, first check that it is compatible with Lightroom. Total waste as I have no way to use the own NAVE except with VERY LOW software from nikon. It's very sad. I tried GIMP too, and he will NOT use the NEF files without a lot of hacking with plug-ins, which are horrible to work with the program. I LOVE THE CAMERA, hates the attitude of NIKON. BEWARE, the recommendation is only if you want to use JPEG and never need to the NAVE, nothing to do with the exception are taking place on your hard drive.

  
  

  I really liked the fact that the d5500 has been added was an easy to operate camera, but I do use Lightroom and Photoshop... and RAW format and want to also 24 pixels and really liked the touch screen and built in wi - fi. I shoot mostly wildlife and birds I am open to any suggestions on another camera but have to sell my D7000 first and then store in the Park same ball around 700-$800 I hope with a lens or two... any info there would be really appreciated!  Thank you very much!
  

  Look here:

  Camera Raw plugin | Supported devices

  John

• define an id scsi for a disc newly added for virtual machines via script

  Hi Experts,

  I used the script below to add disks to several virtual machines
  http://blog.mattvogt.NET/2013/03/14/PowerCLI-mass-add-hard-disks/

  But currently our requirement for change as if we must add 3 2 GB drives, the disks must the controller use SCSI (1:0) - (1:2)

  And next bunch of disks, for example, should use use SCSI (2:0) - (2:2).

  Y at - it an option to set the SCSI ID when adding new disks.
  Please let me know if there is nothing we can achieve through scripts.

  Thanks in advance.

  Kind regards
  Sourav

  Try this new version, it works for me in my test environment

  ### Get VM/Disk Count/Datastore information ### $vmname = Read-Host "VM Name to add disks to"$num_disks = Read-Host "number of disks to add"$ds = "Oracle DB Farm Datastore Group"$format = Read-Host "Disk Format (thin, thick, EagerZeroedThick)"$size = Read-Host "Disk Size (GB)"
  
  $vm = Get-VM $vmname$datastore = Get-DatastoreCluster -Name $ds
  
  ### Add $num_disks to VM1..$num_disks | %{  Write-Host "Adding disk $_ size $size GB and format $format to $($vm.Name) on datastore $datastore"
  
    if($_ -eq 1){      $hd = New-HardDisk -vm $vm -CapacityGB $size -Datastore $datastore -StorageFormat $format      $hd = Get-HardDisk -VM $vm | Where {$_.ExtensionData.Backing.UUid -eq $hd.ExtensionData.Backing.Uuid}      $ctrl = New-ScsiController -Type Paravirtual -HardDisk $hd  }  else{      $hd = New-HardDisk -vm $vm -CapacityGB $size -Datastore $datastore -StorageFormat $format -Controller $ctrl    $hd = Get-HardDisk -VM $vm | Where {$_.ExtensionData.Backing.UUid -eq $hd.ExtensionData.Backing.Uuid}  }}
  

• What is the impact when extracted added for some reason and restarted?

  I would like to know if somehow during migration, so extract added to the night and in the morning I rebooted, what is the impact?
  
  Is that what it means these changes at night will not captured? or extract restarted automatically capture any fleeting change?
  
  Thanks in advance.

  Depends on your policy of retention/size of destination for archiving logs

• A new email account (gmail) can be added for only new messages, not the whole story?

  I need to configure your laptop to check the email of the home for several weeks. I want to configure T-bird to endure. I would like to receive only new email, go ahead, this whole on the accounts. The last time that I set up a T-bird for Gmail account, downloading all messages that would come out on Gmail for several years.

  From the web interface, move messages from the Inbox to another folder, and then add the account as a kind of POP in TB, so that only messages in the Inbox are downloaded. IMAP by default TB when you add the account, so just click Manual.config. and enter the POP settings:

  http://KB.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite

• KB2604111 adding for 2.0 Framework config system.serviceModel

  Had a problem with the application that uses SQL server through .NET framework 2.0.
  Found that kb2604111 update adds a Section called
  the file machine.config in the directory
  C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CONFIG

  UN-installing does not delete the section incriminated.
  so I removed by hand.
  Re-installing the update puts it back.

  Any comments?
  Will be fixed the update?
  This forum works under Win - XP SP3 with all updates.

  Try posting in the SQL Server Setup & Upgrade forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads