Adding GPS data without losing the changes

Similar Questions

• How to change a project imported 6 k to 2K without losing the changes online?

  The wonderful part of first CC is she took in all my 6K Dragon red raw files and set my high project like that. Which means the scale on all video footage is set to 100%.

  
  

  Now, I find I take this resolution and punch in for a close-up, but on a scale of 150%, the exported video will look grainy, of course.

  I know that I should probably have started my project preset to 2K. Then all my videos would fortunately too large to fit on the screen. They would need in the world to be adjusted to (I guess) scale of 25% or something. Subsequently, I could punch of up to 100% easily with no loss of clarity.

  So:

  1. Is there a way to move from a project of 6K for a 2K project without losing my changes online?
  2. And are there ways to globally change the scale to video media groups?

  Thank you in advance!

  Alan Fine

  1. modify the parameters by right-clicking on the sequence in the project window.

  Change the Format of custom edition

  You can now change the size of the image.

  2 make a clip, select other in the scenario: attributes of the dough. Or perhaps, in your case, put the size of the image.

  This will leave the image to its original settings.

• Table validation - report errors without losing the changes made

  Hi all
  
  I'm experimenting with validation of table from Denes Kubicek example at http://apex.oracle.com/pls/otn/f?p=31517:41. I had no problems to make this work,
  but I need to stop if data loss when the validation rules are not met.
  
  If I have 10 rows in my table and updates user 6 of the latter with the new valid values and 1 with a non valid value then the causes of the button send the error message to be displayed as expected, but the page / table returns to the data in the database and all changes are lost.
  
  How can I get the page to keep entered values when the page is refreshed?
  
  Thank you
  Martin

  Martin,

  You may need to replace the validation using JS. Equivalent to Dene JS for example

  Put this in the HTML Header page...

  
  
  Change the 'Submit' button target to URL and type javascript:f_validate(); as URL Target
  
  Cheers,Hari
  
  Edited by: Hari_639 on Oct 29, 2009 7:07 PM 
  

• You can re-edit original music to what was previously copyrighted music... without losing the changes made to the audio?

  If I'm working on a project... The customer have the music videos yet, so I used the versions 'Preview' momentarily. Now, I have the original songs without a watermark... I want a quick way to Exchange songs under copyright with those of watermark. (same songs, just a watermark)... Can I link them? Or will erase the work that I did the masters of audio (keyframe, changes in audio levels, legnth changed the song, audio transitions)? Thanks in advance. I have dozens of songs in question, that would be the reason why I have not tried to see if she would keep my changes or not.

  If you right-click on the track in the project Panel, select "Replace sequences" and then select the correct file that will replace the music but keep all changes (assuming that the tracks are identical in length and the start time).

• How to save pictures of Photos in the form of files without losing the GPS data?

  Hello!

  Can someone advice me in the following cases:

  I want to erase my Photos from iPhone and iMac. Before that, I wish I had pictures of my library of Photos saved as a regular directory with files. As Windows does, for example.

  Can someone tell me how to save all Photos in the form of files without losing the GPS data? Thank you!

  Just export them (File menu) in unmodified versions.

• How can I switch phones with a member of the family without losing the data on a phone?

  How can I switch phones with a member of the family without losing the data on a phone?

  jkatts wrote:

  How can I switch phones with a member of the family without losing the data on a phone?

  Make a backup of each phone to iTunes or iCloud (do not forget to use your Apple ID or personal computer), then do whatever your carrier wants do you to change numbers if that's your intention, then restore these backups on the device of the "other."

• How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio.

  Original title: Using cakewalk pro audio

  How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio. Can anyone help please

  Hello

  What operating system is installed on the computer?

  Contact Cakewalk for assistance:

  Here is the link: http://forum.cakewalk.com/default.aspx

• Change PDF Acrobat without losing the field moves text

  My first post here.  I use Acrobat 6 Pro and have a handful of shapes, I created with text fields to fill out.  I wonder if there is a way when a minor modification must be made within the PDF, if there is a way to make this change in Illustrator without losing the capacity of field text.  After I have change the file in Illustrator and save it, I lose the text fields and have to reformat again them which can be very time consuming and I hope I'm just on a simple framework to avoid this process.  Thank you!

  It's been a while since I used 6 but generally what you would do (at least in all more recent versions) is that your changes to Illy, save as a new PDF (with a different name), open old PDF file and use Document > replace Pages to replace the old and the new. This will bring in your new pages, but leave intact the existing form fields.

• APEX 5 - region to refresh IR without losing the focus on the region of origin

  I have several interactive reports that are on a page. When you select a line in the above report, it updates all other reports. It works very well. However, it changes the focus to the last report which has been refreshed. So basically done scroll all the way to the bottom of the page. I want to focus at the top of the page, but allow the user to scroll down to see additional information if they want to.

  Also, I added a selector to display area directly under the body of the report to allow the user to determine what Sub reports they see. When the user selects a specific report to display (instead of all) I see the following in the console error message:

  TypeError: that.element.find (...) [0] is undefined1 widget.interactiveReport.min.js:1:27035

  When I look in widget.interactiveReport.min.js:1:27035 to this place, I see that he wanders on the following:

  
  

  that. Element.Find (": focusable") [0] .focus ())

  I guess she's trying to set the focus to the last region that has been updated and it can't because this region is not currently displayed.

  The positive point is that it seems to be updated even if it is not displayed and the error is not obvious for the end users.

  However, I would really like to be able to update areas without losing the focus on my region of origin. Is this possible?

  Jennifer

  Hi Jen,

  Thanks for reporting this. I agree that it is a question that the update steals focus, where emphasis is already defined elsewhere on the page and filed bug #21214580 to do this, the fix for which we intend to include in the first set 5.0.1 patch.

  For your information, we also have a future feature filed to improve the way that interactive reports are currently managing the focus. Currently always set us the focus to the first focusable element in the report (and now in 5.0.1 with this fix is going to be a registered caveat not to do where emphasis is already defined elsewhere), but what would be better would be to focus, if possible, be restored where it was previously (for example search field buttons next / previous pagination) ), which is the plan for the future.

  When 5.0.1 comes out, you can remove your workaround solution as who will not be necessary.

  Kind regards

  Anthony.

• Indexing an extra disk without losing the original drive

  In collaboration with Vista Ultimate installed on a C 400 MB drive.  I am writing to inquire about the additional E-Reader installed months after that the computer was built.  Can an introduct "Indexing" on drive E without losing the indexing of the C drive.  The documentation says nothing about it and do such a change could cause permanent damage.

  In addition, the reliability and performance diagnostic feature shows you that memory is a problem.  It is a 2.4 Ghz machine withan processor intel cord quad, 4 GB memory and a relatively new motherboard.  The overview of resources shows a 'yellow' light for the performance of the memory and the use shows 71% and 808 MB of available memory.  I see no particular indication on how to address this issue.  Requested orientation.

  Hello

  Add a second hard drive to Windows Vista search index
  http://www.online-tech-tips.com/Windows-Vista/add-a-second-hard-drive-to-Windows-Vista-search-index/

  ----------------------------------

  Are your running SP1 or SP2?

  Check the reliability and performance - memory to see what is using the memory - also in Manager tasks
  -Process tab - column processor.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I combine the two images without losing the texture?

  Hey Photoshop pros! I'm new to the forum, so I don't know if I write in the appropriate place, but let me know if you can help out me.

  I would like to take a picture of a chameleon isolated on white background and change his skin to strongly resemble the Earth/planet without losing the texture of her skin. Any ideas on how I could go about it, if possible?

  Have you tried to layer different blending modes? I did it with a color picture, another layer of Earth the value of overlay, to a desaturated photo of a Chameneon of land.  You can also try to change the opacity of the layer of the cover layer.

  

• Two copies of Firefox open. How to close one without losing the lugs on the other.

  Firefox has been slow to open up, so after awhile I clicked on the icon a second time.
  Then two copies opened, one with this page of solution of Mozilla and the other with all the many tabs that I use frequently.
  But when I tried to close the copy of solution of Mozilla, I was warned that the two copies would be closed, I know from
  experience can sometimes cause me to lose all the tabs on my master copy.
  So, how can I safely close a copy without losing the tabs on the other?
  Thank you.
  Dave

  Press Alt to display the Menu bar, and then press F to open the file menu, and then use the menu item close this window .
  Or use the X in the upper right of this window.

• can quicken 2007 run on El Capitan (i.e., os 10.11)? I have one currently using Yosemite and you want to update without losing the use of Quicken 2007. I don't like the new version of Quicken.

  Can quicken 2007 run on El Capitan (i.e., os 10.11)? I have one currently using Yosemite and you want to update without losing the use of Quicken 2007. I don't like the new version of Quicken.

  Join the club of those of us who don't like Quicken 2015 or 2016 Quicken; even if I bought it for a 40% discount offered by Intuit!  I was just disappointed by Q2016 compared to Quicken 2007!

  If you have upgraded to the 16.2.3, version it will work well in El Capitan!

• Equium A200: How to remove a partition without losing the BONE

  I have a laptop of A200 equium with a 120 GB hard drive but it is partitioned.
  Can you remove a partition on a hard disk without losing the operating system and get a hard drive with 120 GB?

  If so can you tell me how.

  Hello

  If you want to use the Toshiba Recovery CD and then the whole HARD disk will be formatted and all partitions will be deleted!
  Don t forget that the Toshiba Recovery CD is not the same as an original Microsoft windows Vista CD. The restore CD contains the OS, the driver and additional software

  Concerning

• Satellite P300 - 19 H: can I install Linux without losing the warrany?

  Hello

  I'm a french so please forgive me for my bad English.
  I just want to know if it is possible to install Linux on my system without compromising my warranty.

  My laptop is a Toshiba Satellite P300 - 19H
  The current operating system is Vista Premium Home Edition (pre-installation on my laptop)
  I paid for 3 year extended warranty, that's why I want to be sure I can install Linux.

  If it is possible, I have to take certain steps before you try to install it in a Dualboot with Vista?

  Thanks for the reply.

  Post edited by: OxMoZ

  Hello

  You can install Linux without losing the warranty. Toshiba doesn't support Linux on this laptop, but you can install it of course.

  If you want to do a dual boot with Vista and that you are interested in a version of Ubuntu, you should take a look at the Wubi:
  http://wubi-Installer.org/
  It is a sure way to install Ubuntu on laptop with Vista installed.

  Check it!