Adding memory will this system help?
Hi all
I feel a jerky with HD video playback. While I was working originally with DV, the system was adequate, but I recently tried to work with HDV and more recently, H.264/MPEG-4 Advanced Video Coding of a Nikon DSLR. I know that the system is the limit at best for the HD, but I would like to get a serious upgrade. Here is my system:
Adobe Premiere
Windows 7 Ultimate
ASUS P6T - LGA 1366 Intel X 58 motherboard
Intel Core i7 - 950 Bloomfield 3.06 Ghz processor
6 GB Crucial Ballistix DDR3 1600 (3x2GB) SDRAM
3 x Western Digital Black 640 GB Hard drives, SATA 7200 RPM to 3.0 GB/s
1 disk is for the programs and the OS, 2 drives are configured in RAID 0 for the media using the integrated Intel controller.
Graphics EVGA Nvidia GeForce 9800 GT 1 GB DDR3 PCI Express 2.0 x 16
Series of Corsair TX 750 TX CMPSU-750 watt ATX power supply power
Cooler Master HAF 932 case
Matrox MXO2 Mini for a HDMI output for monitor Samsung and the analog capture
2 x monitor LCD HP 2311e
I do a very simple editing with simple effects like dissolves and fades. I do basic credential and I start to correct the color. I use any After Effects or any other software.
Add more memory will eliminate bad reading? I can upgrade the memory of 24GO, (which is the maximum on the motherboard) for about $170. I would be recognizing all of the opinions on this issue. I wouldn't throw the money into the system if it has a good chance of solving the problems, since this money would be better spent as part of a major update.
Thank you very much
Joe
Manager tasks indicates... Physical memory to around 3.1 GB or about 50% more.
I believe that this is the norm for CS4 given that it is a 32-bit application with a limit of 2 GB for each process. In other words you are probably reach the limit of memory, but it is of a different nature, either in the application itself. Upgrade memory should not be helping.
What the use of the processor on each core? (I suspect that it is close to 100%, with close to zero on the other.)
The best thing I can think is to install a trial version of CS6 (a 64 bit taking advantage of available memory application) and see how it behaves on one of your projects of dSLR and go from there.
Tags: Premiere
Similar Questions
-
Portable omen: adding memory will void the warranty
Last month, I bought a laptop omen with 8 GB of memory. Now I would like to insert an additional 8 GB. To add additional memory module, package on the bottom should be removed as well as disconnect the battery. I can do myself without voiding the warranty, or do I have to have HP to do?
Hello
What's your sign? On many HP machines now you need this book to pieces authorized service provider. Please follow the instructions below to find the product/model of your machine:
http://support.HP.com/us-en/document/c00033108
Kind regards. -
I bought the extra memory. I have to do something when I install the new memory?
I went to the Disk Defragmenter, and he always says that I have 35% of free space. The new memory will change this amount? Or is it important?Monday, December 20, 2010 18:53:59 + 0000, Magallón wrote:> I bought extra memory. I have to do something when I install the new memory?Generally no.How many memory currently have installed? How did you buy?Did you buy exactly the same type, brand, model, etc. ?Why do you want more memory? Depending on how much you have now, andWhat applications you are running, it may or may not do anything for you. More memoryis this not better for everyone. This is my standard message on thisObject:The amount of RAM you need to good performance is * not * aunique situation for all. You get good performance if the amount ofRAM you have prevents you from using the file page in a meaningful way, andIt depends on what applications you are running. Most of the people a typical range runningEnterprise XP applications find that somewhere around 512 MBworks well, others need more. Almost everyone will see poor performancewith less than 256 MB. Some people, especially those who do thingsas modification of large photographic images, can see an improvement in performance byadding even more 512 MB - sometimes much more.If you currently use the page file significantly, more memorywill reduce or eliminate the use and improve your performance.If you do not use the pagefile significantly, it will make more memorynothing for you. Reachhttp://billsway.com/notes%5Fpublic/WinXP%5Ftweaks/ and downloadWinXP - 2K_Pagefile.zip and monitor your use of the page file. Who shouldgive you a good idea of more memory can help and if so, howlots more.> I went to Disk Defragmenter, and he always says that I have 35% of free space. The new memory will change this amount? Or is it important?You have 35% of your hard drive free. It's disk space, also calledstorage. It is not memory, what is RAM. Adding memory will not makeany changes to the available disk space.Ken Blake (MS-MVP)
-
Hello!
I got the card mother gigabyte, phenom 1100t and 16 GB of memory.
Now, I have installed msi x99s sli krait, i7 - 5820 k, 32 memory.
And hoping that run it without reinstalling Windows.
PC started normally. MSI welcome screen first, then I see the logo of windows and the next screen time spent BSOD with message "bios in this system is not entirely consistent.
So I wonder if the reinstallation of the system to solve this problem? Or maybe anyone has the best idea?
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems with your Windows 7 computer.
I suggest to refer to the article below and check if that helps.
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I have several iTunes Store purchases that appear on my bank statement and I don't know what they are for. Can you help me? I'm unable to maneuver through this system to view previous purchases. I wonder if I pay for extra storage, it is always advising me that I'm pretty sure.
Hello
Open iTunes on your Mac and click your name (if you are not signed in, then sign to see your name). Then click on account information. Once you enter the account information screen, you will see a section called historical of purchases. Click 'View all' to see the list of purchases and the ability to watch the dates more.
See you soon,.
GB
-
Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.
I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:
"This device cannot find enough free resources that it can use. (Code 12) »
"If you want to use this device, you will need to disable one of the other devices on this system."
This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!
Additional information:
A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway
If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?
I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.
I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.
Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)
My specs:
Acer TravelMate p257-MG
Windows 7 business
Intel core i5-5200u 2.20 GHz 2.20 Ghz processor
8.00 GB of ram
64-bit operating system
1 t hard drive
940 m Intel HD graphics 5500 & Nvidia Geforce card
Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »
Thanks in advance!
Hello
Thank you for your response.
I appreciate your time.
I suggest you run ' Intel Chipset Software Installation Utility ' and check.
Reference:
http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.htmlPlease keep us updated.
Thank you
-
Hello
I got this message after the import on ten H.264 files that I coded for Adobe media encoder. "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »
The files that we have shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with always the same error.
I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system. I tried twice...
Thanks in advance
Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.
Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.
Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.
Good luck
Hunt
-
Risks for adding memory to windows AMD Turion 64 / 32 bit operating system - 2 Questions
Can I add memory to the system of memorization of the AMD Turion 64 / 32-bit operating system, without damage to the laptop computer through Microsoft?
Hello
You can add memory and I suggest you to contact the manufacturer for assistance on this issue. -
Speed of memory after adding memory and upgrading the video card problem.
My XPS 410 ships in September 2007 with a Core 2 Quad (Q6600) 2.4 ghz processor and two gigs of 800 mhz DDR2 SDRAM. Recently, I added two concerts more than 800 mhz DDR2 SDRAM and replaced my GeForce 8600 GTS with a GeForce 9500 GT with 1 GB of video memory. When I started the system, all four gigabytes of memory have been recognized, but was only running at 667 mhz. Can I fix this? This means that the original memory, or the new memory is really 667 mhz DDR2 SDRAM and not the 800 mhz DDR2 SDRAM I paid for? There are other possible reasons for this?
Hi RuralDigital,
I will need some additional information to help you best.
Ø you have 32 bit or 64 bit Vista?
O do you have 667 MHz RAM in your computer?
When you use one more memory RAM clocked with one less clocked the two Rams, RAM will run at a lower speed RAM, that means that when you install a DDR2 667 MHz and DDR2 800 MHz clock speed, maximum RAM memory will be lower among the 2 cylinders speed, i.e., 667 Mhz.
Then I suggest you to check if the speed of the Rams is the same.
You can also check out the link below.
http://msdn.Microsoft.com/en-us/library/aa366778 (VS.85) .aspx #physical_memory_limits_windows_vista
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
HD - SDI stream to upgrad system help
Dear community,I please you to help the upgrade of my system:(A): MY STATUSCapture HDV via 1394, workflow in the Organization 4.2 CS and after E.1 drive C: System Win 7 64 bit, extreme Board ASUS P6T, sapphire 4870, Intel 920, 12 GB, WD VelR 300 GB 10,0002 drive D: unimprtant, test, different, Samsung 1 TB SP F1 7.2003. drive E: pagefile (8 GB), render, cache, WD VelR 300 GB 10,0004 drive F: captured, WD 300 GB 10,000 VelR5 projects, WD VelR 300 GB 10,000 G: driveThis system is dedicated in PPBM 4 average (without OC, no Raid and i920)In addition to the status:6 Lan-WIRELESS QNAP 639 6 TB Raid 5 for storage of archives and streaming for Sony PS3 home network7 external SATA drives collection musik and the gain of Acronis8 black magic Multibride PRO for future captures HD - SDI 4:2:2 and monitoringMy mid tower (Tower will make the space problems) allowes totally 9 records (1 burner). Corsair hx of 1000 W and freshest Nocuta are used(B) MY TARGET:1. capture and workflow not only HDV, but also HD - SDI 4:2:2 10-bit XDCAM EX sample2. creation of a RAID system3. have enough possibilities for the future in RAID expansion4. have the possibility to use mobile rack for several discs in the future5. important is made fast and work flow (exports need more time if ok)(C.) MY THOUGHTS to create a new configuration:1. C: System, Intel ASUS P6T Extreme drive, 12 GB, 920, sapphire 4870, WD 300 GB 10,000 aboard VelR2 drive D: unimprtant, test, different, Samsung 1 TB SP F1 7.2003. drive E: pagefile (8 GB), render, cache,NVRAIDMAN to create Raid 0 Nr 1, 3 x WD 300 GB 10,000 VelR(as alternative create Raid 5?)New: areca raid controller indicating of 1230 (?) or more + batt.pack4 project F: drive, captured, implements Raid 0 n ° 2to the assistance of areca, same as described in 3.new 3 x 1 TB (or better 2 TB?) 7.200(as alternative create Raid 5?)5. new G: 1 x 1 TB drive (or better 2 TB?)?) fast savingsfast saving of data made with syncronize (no Acronis)My general workflow:(a.) when I captured, I save the captured files not in drive F (described in 4. but the QNAP or external)... to get more disk space(b) when the captured files will be used in a project, I import from QNAP(c.) when a project is completed, I totally export everything in the project used files (captured, project, music used) to QNAP or external hard drive for archive and get more space in the drive E and F (described in 3 4.)(D.) QUESTIONSwhat think my suggested for the new upgrade of configuration und a.)(b) where and what are my general errors(c.) that areca controller must I use to have as options for the future, is better to use one in combination with the internal memory upgrade(d.) is supposed to create 2 Raid 0 (as described in 3 4.)e.) should I use for Raid 0 1 to or 2 TB disks (and what a shoud I use)For examle in areca manual, I found that not all readers are compatible, some can make problems (I have no experience)f.) does make sense to plan upgrade disks in a mobile storage case or is it necessary to change the case now to a very large now (rackmount) (if this would be necessary, I have problems to room-space on the workplace.Thank you for your replies a thoughts.klfi of AustriaVery good new because this gives you plenty of options. With a BR burner installed you have 9 bays 5.25 "left.
It is to install 3 cages SuperMicro (you don't need to install them all at the same time, but nice for the future) to add up to 15 drives 3.25 "in hot swappable bays. Or you can choose to use two cages SuperMicro for 10 discs 3.25 "and add 3 Addonics cages for a 12 2.5" additional disks.
Lots of choices here and you is not really limited by your business. You may be in terms of cooling, however.
C: Velociraptor for OS & programs
D: 3 x Velociraptor in raid 5 on the mobo for the file exchange, media cache, this preview as you intend
E: initially 4 or 5 drives (1 or 2 TB, up to you) in raid 3 for media
RAID controller: Areca ARC-1680 iX-12 with 2 GB of cache ECC and BBM.
I suggest the version 12 in version 8, because he has the ability to extend the default cache 256 MB up to 4 GB, although one wonders if anything more than 2 GB is interesting, given the price difference between the 2 and 4 G sticks.
With this configuration, you have the option to add a multitude of disks to expand your storage space and increase the speed of your raid, if you wish.
So all that you need is that Supermicro two cages, disks and the Areca controller with cache and BBM.
I hope this helps.
-
Hello
I want to improve my iMac, by adding memory cards.
My problem is not sure about the maximum limit of memory can I add I m.
Can you tell me if it's 32 GB or 16 GB or 12 GB?
Each location must have the same value or if we can mix different sizes of memory?
How is the maximum that iMac 11.3 with i7 processor supports? 32 GB, 16 GB or 12 GB?
Thank you very much!
Mariana
System details:
Model name: iMac
Model identifier: iMac11, 3
Processor name: Intel Core i7
Processor speed: 2.93 GHz
Number of processors: 1
Total number of Cores: 4
(By heart) L2 cache: 256 KB
L3 Cache: 8 MB
Memory: 4 GB
Processor speed of interconnection: 4.8 GT/s
Boot ROM version: IM112.0057.B00
Version of the SCM (System): 1.59f2
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x80CE
Part No.: 0x4D34373142353637334648302D4348392020
Serial number: 0x792C8110
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x80CE
Part No.: 0x4D34373142353637334648302D4348392020
Serial number: 0x792C8112
BANK 0/DIMM1:
Vacuum
BANK 1/DIMM1:
Vacuum
go to http://www.crucial.com/ basics and put in your mac details and they will show the compatible modules and configurations
-
Star Wars Special Edition Note: This system is not supported
I need help for the Star Wars content on my laptop special edition of Star Wars. I had to have my hard drive is erased after it got a virus and for some reason any now when I installed the Star Wars command center it tells me "this system is not supported. What should I do to get back what I lost and how do I get the command center working again?
Hey @JudyInCT,
Welcome to the Forums of HP Support!
I understand that you have some problems with Star Wars software on your laptop. I can help you with that, but I need the model number of your laptop first. You can find the model number in this link. Once I know that I will be better able to help you.
-
Original title: help
It's my first Siu of this system, so I want to make some friends from different countries, how do?
Hi hangfenge,
The purpose of these forums to answer is to help people having problems with their computers and the various products we cover here - it is not a place for personal conversations in order to make friends.
To do this, I would say something like Facebook: http://www.facebook.com/ or among the multitude of alll chat rooms available on the web. Here's a search that can help you find a: http://www.bing.com/search?q=chat%20rooms%20online&PQ=chat%20rooms&SP=2&QS=AS&SK=AS1&sc=8-10&form=BB07SS&pc=BB07.
If you have problems with your computer or software, can find here appropriate forum and ask your question and someone will be happy to help you.
I hope this helps.
Good luck!
-
The local policy of this system does not open an interactive session
I can't log on by using windows xp. (Not remotely). Error Msg: "the local policy of this system you cannot open an interactive session. But I can't enter using administrator. Only local users can not enter. Can someone help me?
This problem may occur if the policy 'Deny local logons' is set on your computer.
Go to local security policy.
Go to security settings
Local strategies
User right assignmentFind the refusal to logon locally. Remove users who are unable to connect.
However, do not add Everyone group as then nobody would be able to log on locally.
You will need to sign out and then sign back in before it takes effect.Let us know if that helps.
-
What is the maximum memory for this computer what kind
I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.
What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.
Maximum RAM 2 GB http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory
Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).
Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.
You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.
UTC/GMT is 20:35 on Saturday, May 26, 2012
Maybe you are looking for
-
JJUJ of printing works is not for Iphone 5 s
I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.
-
HOW TO RESTORE TRANSFER DIRECT TO THE SONGS IN MY MUSIC FOLDER
Desktop computer with Windows XP, Professional Version, and Service Pack 3. Since March 2, 2015, the browser is Firefox with Google.Before that, I used Firefox Portable Edition. Our public library offers a download of a company called Freegal music s
-
26.0 FF doesn't support Download Statusbar. An alternative?
You are looking for an alternative to add it on "Download Statusbar" that will work in Firefox version 26 - something that will show you the status of a download, and when it is finished. 7 Professional with all updates, Firefox version 26 widows.
-
LaserJet 300 Touch Screen Uncaliberated
The touch screen on Laserjet300 suddenly had uncaliberated, I touch a point and he selects the other points. Please notify.
-
What can I do? My printer Sharp 1641CS does not install cancel my SO Win 7 64. Can someone help me?