Adding new contacts to the database...

Similar Questions

• I have to add new contacts in the database. Should what stage of treatment I add?

  I have to add new contacts to the database. Should what stage of treatment I add?

  Hello

  Please use "Save to the Contact Table" stage of treatment.

  Thank you

  edynamic Experts Eloqua

• Is there a way I can show only new contacts to the database after a contact download?

  I downloaded a set of contacts, and I was wondering if there is a way to display, segment, filter on contacts only recently added to the database contact Eloqua?

  Thank you very much

  If you add to a Contact Group at the time of the download, you can run a filter to check:

  (1) membership in the contact group

  (2) created contact date

  The number of new registrations added as indicated in the email confirmation of shipment or download history to confirm the number reported (and visible) through your filter. I hope that helps!

• Adding a contact to the database and the drop-down box does not list the provinces

  Hey everybody,

  Was wondering if you ever came across this... we have someone who is to manually enter a contact and got to the State or the Province drop down.  There is no province listed in there... everyone has added provinces?  How did you handle this.  Looks like an easy question, but found nothing on this subject...

  Thank you!

  Thanks Chris... put up a deal and they said the same thing... Thank you!... by support

  Currently, the State or Province in your default Contact point of view is mapped to the Contact status field.

  As per the attached screenshot, the Contact of State field using values from the selection of Siebel billing US State list.

  So that you can either change the selection list of Siebel of billing to one of:

  State or Province

  State or Province - 19/07/2010 14:18:28

  State or Province - 2010-08-18 14:29:07

  You should go and confirm these select lists have the correct value, or you can change to Siebel billing list to include the provinces.

  You can access lists of selection to evaluate-> data tools-> of installation-> Setup data-> select manage lists.

• Added new line at the top of tabular form in APEX 5.0 and universal theme (topic 42)

  Hello Apex Experts,

  When the user clicks on the button 'Add Row' a tabular presentation, I would like the new line to be at the top of the report rather than the bottom.

  
  

  I followed the instructions from Added new line at the top of table in APEX 4.0 form and Denes Kubicek demo application. But it does nothing, always create new bottom line.

  
  

  Anyone have an idea or an idea?

  
  

  Your help would be appreciated.

  
  

  Kind regards

  Blabla
  

  Hi all

  This problem is now solved by following the new blogpost of Dene:

  http://www.deneskubicek.blogspot.de/2015/05/tabular-form-add-rows-top-universal.html

  Kind regards

  Blabla

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.

• Restoring a backup RMAN to a new instance of the database

  Hi guys,.

  I have a problem with restoring a backup RMAN I have with me a new instance of the database. I have with me are:

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2. backup of the control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  3. the full backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_. BKP)

  I received these files to a client environment and I need to restore these to a new instance of the database on a local computer. I gave an attempt as follows (in Oracle 10 g):

  1, creates a new instance of the (Test75) database using the Oracle Database Configuration Assistant

  2 SET ORACLE_SID = Test75

  3 connection to this instance with RMAN

  4 tried to restore the SPFILE from the BKP file received.

  
  

  I make mistakes and cannot continue. I don't know if I will carry out the correct steps. Please help me telling me how I should achieve this goal.

  
  

  Thank you.
  

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2 backup of control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  The first backuppiece resembles a ControlFile and the other looks like a SPFILE'

  > I get error and cannot continue

  What is the error?  (I assume that you have tried to restore the O1_MF_NNSNF_SPFILE_BU_92DVGW9H_ SPFILE. BKP

  Note that you must also SET the DBID before restoring the controlfile

  Hemant K Collette

• Inserting a new record in the database using a form empty ADF

  Hello
  
  I'm trying to insert a new record into the database using a form.
  
  I have an Employee table and its corresponding entity object and the view object. The table has an id that is used as the primary key and is filled using a sequence in the comic book.
  
  Data controls, I dragged and dropped at the sight of the employee as a form of ADF and checked the submit button include. Then I dragged and dropped the validation on submit button operation.
  
  When I connect to the app and go to the page used to create, I have 2 problems:
  1 - the form is filled with the logged in user info.
  2. If I try to change the news and validation, the user info is changed in the database and no new record is created.
  
  It makes a little sense to me, but I would like to know if there is a way around it (get an empty form and insert a new record).
  NB: the employee id is not part of the form, I want to be filled using the sequence.
  
  Kind regards
  MB

  User, please tell us your jdev version!

  To do this, you must create a new record before going to the display of the form page. In a stubborn workflow (btf), you drag the operation createInsert of the VO on the btf and it will generate a link method, add a view to the btf and put a navigation of the binding of the method of the page. Mark the method as 'Activity by default'. Now, ren, you call the workflow, you create a new record that will show your blank form.

  Timo

• new incarnation of the database and rc_database

  Hello!
  
  Have I understood that after the registration of the new incarnation of the database in the recovery catalog
  I see new line in rc_database?
  
  Thank you and best regards,
  Pavel

  Hello

  After you save your database with the catalog database, you can get the information from the database recorded using the view 'rc_database '.

  To interrogate the details of the incarnation of the newly registered database, you can use the view 'rc_database_incarnation '.

  It could be useful! If you feel that your questions have been answered, then please consider fill your questions by marking them as answered. Please clean the forum!

• Add a new line in the database programmatically

  I have a requirement where I need to insert a new record into the database (with ADF BC) everything is done at the bean support. How can I achieve this? I use JDev 11.1.1.5. Here what I did, but unfortunately, the record is not kept in the database.
  
  < code >
  CCPC DCBindingContainer = getDCBindingContainer();
  DCIteratorBinding iter = dcbc.findIteratorBinding("TestRunVO1Iterator");
  RowSetIterator rsi = iter.getRowSetIterator ();
  Line myRow = rsi.createRow ();
  myRow.setAttribute ("Testplanid", "48");
  myRow.setAttribute ("Testroundid", "3");
  myRow.setNewRowState (Row.STATUS_NEW);
  rsi.closeRowSetIterator ();
  < code >

  are commit you your line...

  dcbc.getDataControl () .commitTransaction ();

• BlackBerry smartphones can not add new Contact to the address book - BB Curve 8520

  Got my curve for centuries and added a contact a day or there is.  Updated some applications of the BB world (do not know if there is a connection) and tried to add a new contact, but this error message: Eception exception: Application net_rim_bb_addressbook_app (216) does not. process is completed (by the way were two updates to Twitter and Messenger of BB)

  Is - this coincidence that I just installed a couple of upgrades and what happened today and please how can I fix this?

  Thank you

  I had the same problem today and I have tried almost everything, a few minutes ago, I removed Live Messinger and solved the problem

• [CARS] Add the new disk in the database running environment

  Hi all

  I want to ask a question about oracle RAC especially to add a new disk.

  Here's the situation for existing oracle RAC

  1. There is 1 oracle clusterware (CRS), ASM and 2 node RAC

  2. There is a demand to add a new disk to existing diskgroup

  3. all CRS, ASM and RAC is in the online state

  I read document oracle (How to add a new disc to year Diskgroup existing RAC Cluster or stand-alone Configuration of ASM (Best Practices).) (Doc ID 557348.1()

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Thank you

  Adrian

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  No, you need not bring down the ASM or DB

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Yes, you can add the disk, ASM automatically rebalance and share the workload on the new disk.

  http://docs.Oracle.com/CD/B28359_01/server.111/b31107/asmdiskgrps.htm#OSTMG10070

  There are number of blog posts about adding disks in a diskgroup

  MRMESSIN Oracle Database Administration: Add or remove disks from the ASM disk on the database group active

• To print the new reading of the database string line

  Hi all
  
  I am facing a weired problem, when I write below the code that it is printing online new:
  

   StringBuffer sb = new StringBuffer(1024);
             sb.append("Hello, \n new line ");
             System.out.println(" The String is : "+sb.toString());

  If I'm reading the same data from database (database CharacterSet is ASCIITHAI) and by adding the string to the StringBuffer
  It is printing like below one:
  
  Hello, new line \n.
  
  you want to understand why it does not '\n' as a new line reading database string.

  Put a newline character in the database. A \n is not a newline character, except for the Java compiler (java.util.Properties).

• SyncAction to add new contacts to the list when importing custom object?

  Hello

  I know how to set a synchronization Action to add Contacts to a list, once the Contacts have been imported with the API block.

  I also know that the Contacts can be added as part of the import custom using something like Objetpersonnalise [xxx]. Contact.Field [xxxx]

  My question is, is - it possible to import custom with Contacts AND add to the list all at once?

  Thank you

  Chris

  Fred,

  Thank you.

  I did as you suggested and created a second stage of importation that is important that contacts and then adds to a list and it works very well.

  Thank you very much for your help.

  Chris.

• Query took too much time when adding new column to the table and the index set on this

  I added a new column to the table that contains thousands of records. and created the composite index with three columns (those newly added + two existing column)

  for the specifics. TBL table there are two columns col1, col2

  I added the new column col3 to TBL and created composit index (col1, col2, col3).

  Now for all the records in col3 is NULL. When I choose on this table, it takes too long...

  Any idea what my I do bad., I have check the query plan, it is using the index

  It is solved using collection of statistics using the

  DBMS_STATS. GATHER_TABLE_STATS

  @Top.Gun thanks for your review...