To print the new reading of the database string line

Similar Questions

• Please how can I insert a value of richinputtext in the database string attribute

  Please how can I insert a value of richinputtext in the database string attribute

  If you can get its value at the bean and then call your insert statement to put it in the DB table

  and if you want to know about the execution of SQL query

  then check - Ashish Awasthi (Jdev/ADF) Blog: SQL to run in an ADF Application using DataSource DBTransaction & JDBC query

  Ashish

• Remove the chain if the match format of other print the same string

  Hello
  
  I had posted a question earlier before in the forum in lieu of the chain
  
  > >Delete Sting
  
  My requirement is user will pass the string that is mentioned below
  
  > > "SUCCESS [FID__6a377428_137b946b364__767b].
  
  It should return > > FID__6a377428_137b946b364__767b
  
  If the user only the > > FID__6a377428_137b946b364__767b
  
  It should not replace anything, to just return the same string
  
  logic for this query is it should return the string anything between [] another user that never enter it should return.
  
  Please suggest me
  
  I use this query, that it works fine but the user spends FID__6a377428_137b946b364__767b with ouy [] must return the same
  
  SELECT col1 FROM
  (
  with the data as
  (
  Select trim ('FID_28eff73b_125a3e651e2__7c26') double NECK
  )
  SELECT TRIM ('] ' OF REGEXP_SUBSTR (COL, ' [^ \] +', 1, 2])) COL1
  extracted data);
  
  Thank you
  Sudhir
  
  Published by: Sudhir_Meru on June 29, 2012 21:14

  This will work with the sample you provided...

  SQL> with t as
    2  (select 'SUCCESS[FID_28eff73b_125a3e651e2__7d76]' str from dual union all
    3   select '[FID_28eff73b_125a3e651e2__7d76]' str from dual union all
    4   select 'FID_28eff73b_125a3e651e2__7d76' str from dual )
    5  select str,case when str like '%[%]%'
    6                  then regexp_replace(str,'([^\[]?+\[)([^]]+)(].*?)','\2')
    7              else str
    8         end output
    9  from t;
  
  STR                                      OUTPUT
  ---------------------------------------- ----------------------------------------
  SUCCESS[FID_28eff73b_125a3e651e2__7d76]  FID_28eff73b_125a3e651e2__7d76
  [FID_28eff73b_125a3e651e2__7d76]         FID_28eff73b_125a3e651e2__7d76
  FID_28eff73b_125a3e651e2__7d76           FID_28eff73b_125a3e651e2__7d76
  

• HP 8620:8620 does not correctly print the documents: @PJL lines, scratches stuck instead of text

  Just received this new HP instead HP 8600 8620. Former had some mechanical problems, as it will not load paper or stuck all the scans, well, it may be "just a wear and tear".

  Then, I installed the new HP 8620, connected instead of 8600 to the LAN via a port Ethernet, a new IP assigned.

  Then installed the new software on the users PC.

  Windows XP test page was printed allright, but then...

  Random MS Word 2007 documents will not print. There is a page with @PJL GAME JOB NAME = "Microsoft Word", @PJL lines of COMMENTS and the second page with a few scratches distorted instead of text.

  More interesting, it is - sometimes, it prints to the right. The same document, the same PC, the user-only sending out to print again and voila - document done right.

  Any suggestions?

  Voxel7 wrote:

  I'm having the same problem.

  I'm on Windows 10 & Word 2007. The problematic files contained Hebrew characters in the file name. Rename the file to a name that contains only English letters solved the problem, but this isn't a work around convinient. HP should provide the update of the driver.

  It happened with the default driver that windows installed 10 automatically and complete driver, I downloaded at HP.

  An update:

  Called HP support. They told me to find the IP address of the printer and then go to the Control Panel, the printer settings and to add a printer via the IP address, but not to install the driver automatically to add manually in a list.

  The name of the driver is "driver of HP Deskjet PCL3 class" (use as default printer).

  Yes, it's Deskjet, Officejet and its "HP Deskjet PCL3 class driver ' and not 'HP Deskjet PCL3 class Driver2.

  That fixed the problem.

  HP, please update the original drivers.

• Error installing service pack 2 unable to read or write in the database

  I had to reformat my computer and when you do updates, I can't upgrade to windows service pack 2. The error message says "Service Pack 2 Installation Error-failed to read or write to the database." I tried the solution that I found that told me to stop the cryptographic services, go to the CatRoot32 file and remove the Edbxxxxx.log file but when I open the file there is no log file for me to remove it. I reformatted before and never had this problem. Any help would be appreciated, thanks.

  Better to start again from scratch. This time, follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Repost: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• [CARS] Add the new disk in the database running environment

  Hi all

  I want to ask a question about oracle RAC especially to add a new disk.

  Here's the situation for existing oracle RAC

  1. There is 1 oracle clusterware (CRS), ASM and 2 node RAC

  2. There is a demand to add a new disk to existing diskgroup

  3. all CRS, ASM and RAC is in the online state

  I read document oracle (How to add a new disc to year Diskgroup existing RAC Cluster or stand-alone Configuration of ASM (Best Practices).) (Doc ID 557348.1()

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Thank you

  Adrian

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  No, you need not bring down the ASM or DB

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Yes, you can add the disk, ASM automatically rebalance and share the workload on the new disk.

  http://docs.Oracle.com/CD/B28359_01/server.111/b31107/asmdiskgrps.htm#OSTMG10070

  There are number of blog posts about adding disks in a diskgroup

  MRMESSIN Oracle Database Administration: Add or remove disks from the ASM disk on the database group active

• Read a record of file and write to the database.

  Hello
  
  I read a file using a file adapter and write to the database using DBAdapter table. In BPEL, I used activity to receive the entry from the file and call activity to call dbadapter.in between receive and call I used activity activity of transformation of transformation.the problem is that, after deployment it.i get following error two errors:
  
  (1) no recoverable system failure:
  < bpelFault > < faultType > 0 < / faultType > < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < Summary / > < / part > < part name = "detail" > < details > error location JCA resource adapter. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then restart the application server < / details > < / part > < part name = "code" > < code > 12510 < / code > < / piece > < / bindingFault > < / bpelFault >
  
  2 non recoverable system fault):
  Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / > The JCA Binding component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the application server WebLogic or 2) the element '< jndi name >' in weblogic - ra.xml has not been set to eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
  
  Please suggest how to solve.
  
  Thank you
  
  Tejas

  Check your source data and your connection adapter db adpater deployments factory.
  Check if you have configured all steps of http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/life_cycle.htm#BABBEDBF.
  Also, in your file .jca in your jdeveloper have named the location of connection-factory as "ist/DB/draw ' if so change it to one that you have created in the db adapter deployments.

• LabVIEW 2013 close when I try to read the database table.

  LabVIEW 2013 close when I try to read the database table.
  I get the error message, Labview falls just crashes. I use Labview x 32 and connective Toolkit of connectivity of database on Windows 7 x 64. I connect to PostgreSQL with ODBC driver, the connection is stable.
  In my database, I have a lot of tables, I read all those without one.
  When I try to read table bad I get data then labview crash. When I restart Labview, I have no message on the error.
  Also I try to use LabSQL-1. 1a. But it has the same result.

  I found the solution.

  I think the problem was that I have very large table in my database.

  At the beginning I received data from table with next quiry:

  SELECT column1, column2 FROM 'table ';

  But when I write then:

  SELECT column1, (column2, ',') array_to_string FROM 'table ';

  all worked!

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

• After the firmware update, cannot add new reading lists

  I updated from 1.01.29 to 1.01.32 and noticed some changes.

  1. the layout of the directory of the Clip is a little different.  It allows to view the Clip in this framework, "Internal memory" and in this framework, records.  Now it's just the Clip, in this setting, files.

  2. all the songs in the video for the upgrade are not visible in the music folder or any other folder.  They are on the device, because I can play them, and they take place on the Clip.

  3. with the help of WMP11, I added a new reading list for the clip.  The finer transferred playlist songs I can see in the music folder, and the reading list does not appear in the playlists of the music (even if all the playlists of the firware update see the place very well).

  When you upgrade your firmware, the Clip reset USB mode (under settings).  Back to what you had before (PSG?) and you will probably be fine again.

  Note that now, from your description, have a few transferred to your Clip in each of the MTP and MSC modes (before and after the upgrade).  There is nothing wrong with that, except that your computer can only see what's on your Clip the content transferred under USB mode you are currently connected to your computer under.  And so he can that you want to remove your hardware update, redefine your USB mode on what she was before and then transfer to the back matter to your Clip.

• Media Player 11: How to print the content of a reading list (.) WPL) somehow "well-formatted.

  I want to print different playlists that I use in Media Player 11, but there is no print option in Media Player

  See you soon
  Wakdos

  Hello

  WINDOWS MEDIA PLAYER PLAYLIST PRINT
  http://www.footballchance.com/WMPplaylist.shtm

  How do I print a playlist in Media Player 11 - it comes to the use of the foregoing
  http://www.ehow.com/how_5614381_print-playlist-Media-Player-11.html

  Printing of playlists
  http://Askville.Amazon.com/SimilarQuestions.do?req=Windows-Media-Player-11---print-listing-artists-albums-library

  ==============================================

  This free program does not print playlists but it offers control over printing file lists.

  No longer fumbling with my computer or Windows Explorer, we wish you could print information
  all of your files. Directory of Karen printer can print the name of every file on a disk, as well as the file
  size, date and time of last modification, and attributes (read-only, hidden, system and Archive)! And
  now, the list of files can be sorted by name, size, date created, date last modified, or last access date.
  http://www.KarenWare.com/PowerTools/ptdirprn.asp

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression.

  * Original title: printer print only symbols

  Hello world

  When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression. If my old document is damaged to corrupt so how do I fix it

  Old documents are probably corrupt. Check out these links:

  How to troubleshoot print failures in Word: https://support.microsoft.com/en-us/kb/826845

  How to troubleshoot printing problems in Word: https://support.microsoft.com/en-us/kb/826862

  Troubleshooting damaged in Word documents: https://support.microsoft.com/en-us/kb/918429

  And this announcement in Office/Word groups is a better idea. This may very well be a FAQ here.

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• NO OSPF routes in the database, but in the Routing Table (read you correct)

  Hi all

  I have a lab of two roads R1 & R2 (connected with Ethernet link) like:<------------------>R1, R2

  I can see, OSPF learned routes are Routing Table, but not in the database (read you right).

  How can it be possible? I saw the other direction several times i.e. the routes in the database but not in the routing table (like, VPN L3 remote end when we use the ability VRF-lite, or we try to remove from the interarea road of the LSA, but that is not the concern here)

  I captured a few newspapers & running Setup two routers. Please check and let me know what I am doing wrong.

  I erased the OSPF neighborship several times but still the same. Tried to bounce e1/1 on R2, but no luck.

  R2 #ping 3.3.3.3 lo3 Yes

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 3.3.3.3, time-out is 2 seconds:

  Packet sent with the source 2.2.2.2 address

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 64/76/108 ms

  R2 #.

  R1

  R1 #.

  R1 #show int ip short bones

  Interface area PID IP address/mask cost of State Nbrs F/C

  Lo0 9.9.0.1/32 LOOP 1 1 0 0/0

  Lo3 3.3.3.3/32 LOOP 1 1 0 0/0

  Et1/0 1 0 9.9.12.1/24 10 DR 1/1

  R1 #.

  R1 #.

  R1 #show ip ospf da

  Router OSPF with ID (9.9.12.1) (process ID 1)

  Router link States (zone 0)

  Number of links ID ADV router age Seq # Link Checksum

  9.9.12.1 9.9.12.1 255 0 x 80000028 0x00BE86 3

  9.9.12.2 9.9.12.2 256 0 80000032 0x0067F8 x 2

  NET link States (zone 0)

  Link ID ADV router age Seq # Checksum

  9.9.12.1 9.9.12.1 255 0 x 80000003 0x00BDFC

  R1 #.

  R1 #.

  #show ip route R1 | b door

  Gateway of last resort is not set

  2.0.0.0/32 is divided into subnets, subnets 1

  O 2.2.2.2 [110/11] via 9.9.12.2, 00:04:17, Ethernet1/0

  3.0.0.0/32 is divided into subnets, subnets 1

  C 3.3.3.3 is directly connected, Loopback3

  9.0.0.0/8 is variably divided into subnets, 3 subnets, 2 masks

  C 9.9.0.1/32 is directly connected, Loopback0

  C 9.9.12.0/24 is directly connected, Ethernet1/0

  The 9.9.12.1/32 is directly connected, Ethernet1/0

  R1 #.

  R1 #.

  R1 #show ip os not

  Neighbor ID Pri State Dead Time Interface address

  9.9.12.2 1 FULL/BDR 9.9.12.2 Ethernet1/0 00:00:36

  R1 #.

  R1 #.

  R1 #show run | s r o

  router ospf 1

  Log-adjacency-changes

  R1 #.

  R1 #.

  *************  R2  ********************

  R2 #.

  R2 #show int ip short bones

  Interface area PID IP address/mask cost of State Nbrs F/C

  Lo3 2.2.2.2/32 LOOP 1 1 0 0/0

  Et1/1 1 0 10 BDR 1/1 9.9.12.2/24

  R2 #.

  R2 #.

  R2 #show run | router s o

  router ospf 1

  Log-adjacency-changes

  passive-interface Loopback3

  2.2.2.2 network 0.0.0.0 area 0

  Network 9.9.12.0 0.0.0.255 area 0

  R2 #.

  R2 #show da os ip

  Router OSPF with ID (9.9.12.2) (process ID 1)

  Router link States (zone 0)

  Number of links ID ADV router age Seq # Link Checksum

  9.9.12.1 9.9.12.1 326 0 x 80000028 0x00BE86 3

  9.9.12.2 9.9.12.2 325 80000032 0x0067F8 0 x 2

  NET link States (zone 0)

  Link ID ADV router age Seq # Checksum

  9.9.12.1 9.9.12.1 326 0 x 80000003 0x00BDFC

  R2 #.

  R2 #.

  R2 #show ip road | b door

  Gateway of last resort is not set

  2.0.0.0/32 is divided into subnets, subnets 1

  C 2.2.2.2 is directly connected, Loopback3

  3.0.0.0/32 is divided into subnets, subnets 1

  O 3.3.3.3 [110/11] via 9.9.12.1, 00:05:22, Ethernet1/1

  9.0.0.0/8 is variably divided into subnets, 3 subnets, 2 masks

  9.9.0.1/32 [110/11] via 9.9.12.1, 00:05:22, Ethernet1/1

  C 9.9.12.0/24 is directly connected, Ethernet1/1

  The 9.9.12.2/32 is directly connected, Ethernet1/1

  R2 #.

  R2 #.

  R2 #show ip os not

  Neighbor ID Pri State Dead Time Interface address

  9.9.12.1 1 FULL/DR 00:00:30 9.9.12.1 Ethernet1/1

  R2 #.

  R2 #.

  Hello

  an OSPF router generates only a router-LSA (Type-1) by Area.This router-LSA contains a list with all the links in this area.

  You can see your telesignalisations with 'show ip ospf router of database' - 'show ip ospf database' rather an overview:

  Router Link States (Area 0)Link ID         ADV Router      Age         Seq#       Checksum Link count9.9.12.1        9.9.12.1        326         0x80000028 0x00BE86 3

  Router 9.9.12.1 announces a router-LSA for area 0 and the LSA contains 3 links. Apparently, you created the Loopback IPs when adjacency was already formed, if not the router ID would be defined the highest loopback IP (maybe that's the reason for your confusion). HTHRolf

• New Windows 7 pro machine always prints the first page in a direction, but all other pages are printed in a different orientation

  We bought a new PC for one of our employees that is running Windows 7 Pro 64 bit. We have several printers throughout our office area. There are three printers that this person will print to the two Ricoh printstations and a Brother Laser printer. Any printer that employee uses printers still print the first page, a focus on the next page and all other pages in the other direction. The first page is always printed in the opposite direction of whatever orientation has been selected.

  If it has a four page document and select landscape as the orientation, the first page prints in portrait orientation while the other three pages will be printed in landscape. She can go back and print the document again and all four pages will be printed in the right direction. This happens no matter which printer she uses, as well as any program (Word 2010, Excel, Adobe, web pages, etc...). Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.