Request is not automatically brought in the foreground on the second launch

Similar Questions

• "The object you requested is not currently available in the music of Apple to the Canada."

  I get this error "the object you requested is not currently available in the music of Apple in Canada." every time I try to open a shared playlist of music apple link.

  Help!

  Hello tommy.ly,

  Thank you for being part of the community of Apple!

  As I understand it, you can't play an Apple shared music playlist. Being able to listen to shared playlists is a great way to discover new music.

  When music is allowed for music from Apple, the license States that the countries that the song can be played in.  Most likely, some of the music on these playlists simply are not available through Apple music to the Canada.

  See you soon!

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Clip of Label and name not automatically update in the timeline panel

  I just finished a major project, so now that he has the time to take the plunge and upgrade first. So far, it's fine, but the clip labels and names only are not automatically updated in the timeline panel when I change into the bin. Is this something that only works on new projects (rather than old projects updated in this new version)? Or...?

  Go to the menu file > Project Settings > general, and when the component of the project opens, check the box 'display name of project items and label color for all instances.

  

  MtD

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• Adobe Creative Cloud 12 month prepaid membership - loading and redeeming failure code said not be valid on the second attempt

  Adobe Creative Cloud 12 month prepaid membership - loading and redeeming failure code said not be valid on the second attempt?

  Suggestions please

  Redemption codes are good for one use.  Contact the Adobe Support directly for assistance with your purchase (if you bought through Adobe)

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Messages do not automatically moved from the Outbox to the sent items

  Hello. Everything worked fine until 08:00 this morning.

  Now, when I send an email, it is sent but is not automatically moved from Outbox sent items. So, I get an error message (but no error code. He says only: "some errors occurred while processing the requested tasks"). Because the message remains in the Outbox if there is another message to send that it will send the first once again, and then the second, then the first again, then the second again, etc. The only way I can work around it must manually move each e-mail sent from the Outbox to sent items. The messages are efinitely goes recipients because they are responding to their

  I am running Windows XP Professional Version 2002 Service Pack 3 and Outlook Express

  Any thoughts would be very welcome

  Best regards

  You have apparent dbx file corruption.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• How not automatically login on the website?

  I don't want to automatically connect on the Web site. I use google chrome

  Hi, I'm Carlos. Just check the little square in the cover page of Skype and make sure that it is not a cliché. I hope this works.

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• Slide will not automatically advance to the next

  I have a slide that I need to switch to the next slide after the audio and video playback. The audio and video are both set to play automatically when the slide is entered. All my other slides in the project automatically move to the slide following and some of them have audio and video. If I activate the blade PlaySkin is as I want it, which is to play the audio and the video once and then go to the next slide. However, I don't want the PlaySkin in the lesson at all. This lesson is just a quick tutorial and didn't need the skin.

  It was my actions for this slide

  

  When the blade reaches the end of the video, the video will stop, but the audio loops. I don't have the "Loop Audio" active choice. And with only one change the presence of the skin, it works. Is anyway I can fix it so that the blade will automatically to another without going through it have skin?

  Thank you

  Kellie

  Figured it out! All I had to do was select the video and on the timing tab in the property inspector, change the display for: for the duration of the video. They will then advance to the next slide.

  

• Height of the page not automatically adjusts when the drop down menu expanded

  Using Adobe Muse CC 2015 on a Mac, I created a Web page for my company (www.unafilm.de).  I used a horizontal menu in the master page to the layout of the pages of the subsites (news, movies, about, contact, etc.) to visitors. Everything works well except a menu items which is supposed to display an another 25 points / subpages.  They expand nicely, but I can show all because the height of the page does not take into account the length of the drop-down list. So, I can only see subpages on this particular menu point that allows at the height of the page. The page does not extend and I can also not scroll down.  No idea why? Thanks in advance.

  Is nothing, that you can change. It is simply how browsers work. Unless you want to annoy your customers with a browser window resizing script (bad idea), the window is not adapt. 25 menu entries using is perhaps not the best idea at first, anyway.

  Mylenium

• HA, host down, not reboot VM on the second node

  Hello...

  I'm testing the Esxi5, and I have a problem with HA.

  I configured a Cluster and two guests on it.

  Cluster - CLUSTER name

  Host 1 IP - name VMWARE0 - 10.0.0.9 (Master - vMotion Enabled) - Dell PowerEdge R715 - AMD Opteron 6136 - 64 GB of RAM

  The 2 - name VMWARE1 - 10.0.0.10 IP host (Slave - vMotion Enabled) - Dell PowerEdge R715 - AMD Opteron 6136 - 64 GB of RAM

  I used reconfigured for vsphere HA on both hosts

  There is no virtual machine in production, only the tests yet.

  But when I reboot VMWARE0, virtual machines powered are moved to VMWARE1 in off State, but they are not started automatically.

  When the VMWARE0 end reboot all virtual machines come back and then they are started according to the configuration of "Virtual Machine Startup/Shutdown" on the host computer.

  Y at - it a Bug that we need to correct or I do something wrong?

  vCenter Server and vSphere Client - Version 5.0.0 - build - 455964

  ESXi - 5.0.0 - 20120302001

  Thank you very much...

  No, the virtual machines will not migrate back once the host is up and running again. This must be done manually. If you have any DRS in place, DRS can choose this host for recently powered on VMs (initial investment) or migrate virtual machines on that host, in the case where the other host is overloaded.

  Greetings from the Germany

  André

• Updated after the second launch popup content

  Hello. I'm on 11g R2

  I'm trying to implement 'passing data to popup', in accordance with article "Adf code cordner" http://www.oracle.com/technetwork/developer-tools/adf/learnmore/35-passing-values-to-popup-169177.pdf

  Everything works fine except for the fact that everything works only after the popup is displayed for the second time. For the first time, the popup is empty

  Here is my code (output text located inside the iterator)

  < af:outputText value = "outputText1" id = "ot5".

  clientComponent Binding = "#{backingBeanScope.backing_NewsComments.OT5}" = "true" > "

  "" < af:showPopupBehavior popupId = ": tagPopup" triggerType = 'sender' align = "endAfter."

  alignId = "cil4" / >

  < name af:clientAttribute = "CustomerId" value = "#{news.» NamTagsEOVOVL.CustomerId} "/ >"

  < / af:outputText >

  And this is the popup. I scored "BOLD" the relevant parts

  < af:popup = "deferred" autoCancel childCreation = 'disabled' id = 'tagPopup '.

  contentDelivery Binding = "#{backingBeanScope.backing_NewsComments.tagPopup}" = "lazyUncached" "

  eventContext = 'Launcher' launcherVar = 'source' animate = "default" >

  < af:panelWindow id = binding = "#{'pw1' backingBeanScope.backing_NewsComments.pw1} '"

  title = "details of the tag #{viewScope.CustomerId} #{viewScope.CustomerName} '"

  contentWidth = "220" >

  < af:panelGridLayout id = binding = "#{backingBeanScope.backing_NewsComments.pgl6"pgl6"}" >

  < af:gridRow id = binding = "#{"gr11"backingBeanScope.backing_NewsComments.gr11}" >

  < af:gridCell id = binding = "#{backingBeanScope.backing_NewsComments.gc18"CG18"}" columnSpan = "2" halign = "center" "

  VAlign = "middle" >

  < af:outputText value = "KK #{viewScope.CustomerId}" shortDesc = "#{bindings. CustomerId.hints.tooltip}'

  ID = binding = "#{backingBeanScope.backing_NewsComments.txtCustId"txtCustId"} '"

  partialTriggers = "ilov1" visible = "true" / >

  < / af:gridCell >

  < / af:gridRow >

  < / af:panelGridLayout >

  < / af:panelWindow >

  " < af:setPropertyListener from =" #{source.attributes.CustomerId} "to =" #{viewScope.CustomerId} "type ="popupFetch"/ >

  < / af:popup >

  Please advice...

  value, you have mapped to viewScope, but the link is done in the backingBean. do point to viewScope so much just to see if it works.

• I'm upgrading Firefox 20.0 but not automatically connect to the server, just hangs. Why? 19.0.2 States that it is "free" update channels: what is it?

  Regularly alert is displayed to update me to 20.0 but it does not connect to the server - even if I have no problem with the modem at another time. It just hangs there. I thought that Firefox will update automatically. I have topped up, as advised but still 19.0.2. On the message States, I am currently on the channel "update of output". What does that mean? Do I need an update? Why?

  "update of output" means that you are using the stable version of Mozilla Firefox.

  Have you tried to reset firefox and then runs the update to verify that it contains that you are to the latest version?
  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

• Address bar does not automatically go to the pages

  I love Firefox 4, but a very important feature that I liked what was still in Firefox was not found in 4.0 but it was 3.

  Firefox would automatically redirect me to pages that would often appear first in Google when I typed in the address bar. For example, if I typed blog ps it would be b = me on the PlayStation blog, if I typed in gmail, it would bring right to Gmail, ect. But not there looking for just what I'm typing. When I type gmail it will bring up a search on google for gmail.

  I tried to see if changing some options in all: config but nothing worked so I reset that I changed.

  Help, please! I'm debating back to v. 3.6.16.

  The change between Firefox 3.6. * and Firefox 4 is how the location bar search. In Firefox 3.6, it uses Google search "search by name". With innovation by the name search, it performs a search on Google and if there is a clear match he will take you on the site, otherwise, it shows the Google search result. With Firefox 4 it performs just a search on Google, if you type in something that is not recognized as a URL.

  To get the behavior of Firefox 3.6 on Firefox 4, you must change a hidden preference.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Locate the preference keyword. URL, double-click it and change its value on the link below

  http://www.Google.com/search?ie=UTF-8 & oe = UTF - 8 & SourceId = navclient & gfns = 1 & q =

  If you prefer, you can also do this by installing traverse it by extension - https://addons.mozilla.org/firefox/addon/browse-by-name