Adding new HARD disk to the current setup RAID1 on PowerEdge T310

Similar Questions

• Can I switch from MX7 to CF 9 new hard disk using the MX7 serial numbers

  Hi all

  I want to install the version upgrade to coldfusion 9 on a new server / hard disk, using the serial number of MX7, that has been uninstalled.

  Is this possible?  Potential complications?

  I can't disable MX7 because this no longer exists.

  Mike

  Yes, when you enter the CF9 license, the installer will say 'it of a license upgrade, please provide the original of his licence' and give you another form to your CF7 license.  If she likes these two licenses, you're good to go.

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• Installed a new HARD drive, lost the OS disk, what now?

  My son's hard drive crashed and can't find the backup OS for a new hard disk drive.  How can I get the operating system for its Aspire M3470G, Win 7 64-bit? Am I stuck buying new? Arrgggh, sucks, losing backups.

  The Acer store can sell you a set of recovery disks.

• My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• Pavilion dv6-2162nr laptop: install the new hard drive with the system image

  I have a hp laptop dv6-2162nr win 7 I am about to install a new hdd Seagate, I have the repair disk and recovery disks that I made at the outset after purchase. I also updated backup files and file system image. I want to recover my file system registered... at what time; using the recovery discs, the new Seagate hdd will be ready to get a picture of systems?

  BobO2

  Recovery disks do not use the Image you did install Windows and all software/drivers hard disk from the factory original.

  You would start with repair cd to restore the Image.

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  I know PC never fade completely everything, so if there is a way to get personally, I'd really like the head upward on the how to do?  I would be better for me to download all this information on a PHDD, rather than handing the portable real in question so that its content of forensics experts, because current 'Communications Network serious security' we have been subjected to.

  Here you go:

  1. Use an imaging program to create a clone of your hard drive.
  2. Delete the original from your PC hard drive and keep it somewhere safe.
  3. Put the clone in the PC.

  It is the only way to really keep all while still able to use the PC.

• New hard disk and overcommitment WARNING

  I'm trying to add a new hard disk to a virtual computer on a NFS datastore that applies a provisioning. Our NFS volumes are set to auto grow, if they reach a certain threshold. This normally isn't a problem, and so over-provisioning us like crazy.

  Recently, however, we encountered a problem when a new hard drive size exceeds free space in the data store. He responds with the following error (creation of a to 1.99 VMDK):

  PowerCLI D:\ > new-disk-hard - VM $vm - CapacityGB (1.99 * 1024)-$datastore data store

  New-hard drive: 04/08/2014-10:44:09 new-harddisk for the VirtualMachine-vm-10964 entity failed with the following message: "not enough disk space on the data store"datastore1".»

  Perform the same task in the vSphere Client generates the following warning, which can be bypassed by clicking 'OK ':

  

  I tried to create a smaller drive and increase it, but I get the same error. I do not see a - Force parameter or anything equivalent. Is it possible to approve via PowerCLI?

  The ThinProvisioned switch is an option, or which is in conflict with the NFS configuration?

• How to make hard disk for the guest operating system diffferent?

  I have a HP DL380 G7 with a RAID 1 on two hard drives of 2 TB. In the vSphere Client, when configuring the virtual machine, how I attributed part of the disk space to my virtual machine if it appears as "D" drive for storage?

  To add a new virtual disk, choose "Create a new virtual disk" in the wizard.

  André

• How can I get Google search bar results to open in a new tab instead of the current tab?

  When I use the Google search box, I would like the search results to open in a new tab instead of the current tab.

  Does the search bar in the Navigation toolbar?

  For this search bar, you can switch the browser.search.openintab true on the topic: config page.

  • http://KB.mozillazine.org/about:config

  For the Google site you can do so via the Google search settings page.

  • http://www.Google.com/preferences?hl=en

• Is it possible to make the new panel downloads show the current speed of a download?

  With the new Panel of downloads, the current speed of the download is missing. It is heavy to have to click on view all downloads and open another windows just to see the current speed. Is it possible to add the current speed of a download to the download Panel?

  The only solution I found is complicated, and it must be repeated whenever Firefox is updated. I will try to explain it as simply as possible.

  1 paste the following address into the address bar and press ENTER.

  • chrome://browser/content/downloads/download.xml#download

  2 copy the code to the Clipboard. The part of the code is the stuff that is applied on a white background (although the color may be different on your configuration). It starts after the notification at the top that says: "this XML file does not appear to have any information of style associated with it. The document tree is shown below. « ; do not copy the opinion itself.
  
  3. start a text editor such as Notepad and paste the contents of the Clipboard.
  
  4 change id = "downloadBindings" of id = "downloadBindings-mod"
  
  5. change id = 'Download' id = "Download-mod"
  
  6. search for class = "downloadDetails" (Note: in the current version, there are two of these instances in the file). On the same line, change the text fragment xbl: inherits = "status = value to xbl: inherits =" value = statusTip
  
  7 open your Firefox profile folder. In this folder, create a new folder named chrome if there is no such thing as a folder with that name already.
  
  8. save the file as downloadSpeed.xml in the subfolder chrome in your profile folder.
  
  9. in this same folder, create a new text file named userChrome.css. Please note that the file name is case-sensitive, and that Windows HIDES file extensions by default, which could result in the file named userChrome.css.txt.
  
  10. in the userChrome.css file, put the following CSS code. If the first line is already present in the file (in which case you already have a userChrome.css file), do not include it.

  @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
  
  richlistitem[id^="downloadsItem_"] {
    -moz-binding: url("downloadSpeed.xml#download-mod") !important;
  }

  As an alternative to step 10, you can use the CSS code in the extension of the elegant place. In this case, you must include the full path to the downloadSpeed.xml file, for example:

  @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
  
  /* Show speed in downloads arrow panel */
  richlistitem[id^="downloadsItem_"] {
    -moz-binding: url("file:///C:/Users/GingerbreadMan/AppData/Roaming/Mozilla/Firefox/Profiles/2xqh1840.default/chrome/downloadSpeed.xml#download-mod") !important;
  }

  Original on Mozillazine thread:

  • http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2667167