Adding reliable programs to UAC

Similar Questions

• I have a 2009 17 "MB pro 512 GB HD, it begins to run slowly. Is there a reliable program that can wipe the hard drive.

  I have a MB pro 17: with a hard drive, 512, he starts to run a bit slow. All the updates are installed. Is there a reliable program that will wipe the drive. «also it is an advantage to have a replacement disk SSD.»

  Performance issues, too full hard drive, lack of system resources, too old

  are obsolete applications, old parts of system of earlier versions (or is no longer valid)

  all the reasons to be aware of what to do.

  If the hard drive is too full of content, you will need to choose what to keep and what to

  Remove; an archive external and another drive for backup (recover or restore) are

  a few things to invest in and learn how to use Time Machine, OS X Recovery, and

  maybe learn to make, test and use full Clones of the OS X system.

  • Guides to tech - Malware, Adware, Performance - thesafemac

  http://www.thesafemac.com/tech-guides/

  You may obtain and use report generators software that is non-invasive, to see a

  General overview of where system resources are allocated; Etrecheck...

  http://etrecheck.com/#about

  Avoid 'cleanmymac' or 'mackeeper" and other items that are made to rip you off.

  There are a few software uninstaller that can help eliminate some software,

  those who are usually free like AppCleaner, among others that can be used

  with caution. There are a lot of unknown content in a non - casual

  technical users, who must be in the Mac OS X for the computer to operate.

  • Applications can affect the performance of Mac, battery, temperature and fan activity - Apple Support

  How to completely remove applications to OS X with AppCleaner (and maybe mess to the top of your Mac)

  http://osxdaily.com/2012/02/15/delete-applications-Mac-OS-x-AppCleaner/

  Some of the things there can be dangerous; If tread with caution...

• I can train the UAC? I regularly run several programs and UAC asks EVERY TIME if that's OK.

  I regularly run several programs and UAC asks EVERY TIME if that's OK.

  UAC is designed to collect want programs run without my permission.  Why can't have a list of programs that are allowed to run without hindrance when I'm the one initiating this shit to begin with?

  As far as I KNOW, there are four scenarios in which UAC does not:
  • When it is off (obviously!)
  • When the actions of the programme are not potentially dangerous.
  • When a program is run under a high count.
  • When the program is running under the system account.

  Your statement "UAC is designed to catch programs who want to run without my permission" neglects the main point. UAC is designed to prevent programs from performing potentially dangerous actions such as changing the files/system folders or by editing the registry. In other words, a UAC challenge is never directed to a specific application. She always helps that tries to make a request.

  I think it would be easy for Microsoft create a list of "good guys". I also suspect that it would be just as easy for programs not allowed to populate this list without your knowledge, so beating UAC in no time at all.

• Some programs of UAC-virtualized cannot load the dll - possible consequence of KB2859537 (ASLR)?

  Dear community of readers and contributors.

  I started noticing this last August 15. Shorty after a bunch of updates system on my Vista Ultimate 32 bit, a few programs stopped working, with different error messages: "this application has failed to start because wxmsw28u_core_vc_custom.dll is missing. Reinstalling might solve the problem', 'User lib not found', 'this application is not correctly installed. Please install the application. I was wondering about some possible lack or corrupted DLL until I noticed:

  (1) all the programmes concerned are virtualized-UAC
  (2) if I delete their files virtualized in the virtual store, they can start again, until they wrote in the virtual store again, and then once I left him, they start again
  (3) if I disable UAC virtualization for these programs (by the Compatibility Administrator), programs are able to start again (but with other problems, of course)

  Clearly, there is a change in behavior that reminded me of these recent updates and after a check that I have the impression that this one, KB2859537, that modifies the ASLR may very well be responsible for this. I saw no viable solution right now, you have any advice?

  Without details I've probably will disable ASLR completely on my system, just to see if it does the trick, but I'm considering not live like that, of course...

  I don't know if EMET has options to disable by program the ASLR, will download and try it. These programs are not compatible ASLR, but I could try disabling ASLR on UAC virtualization file system filter, if it is possible...

  Thanks for your help!

  False alarm, I finally found a solution that makes me think it is unrelated to the patch of the ASLR. In which case it can come useful for others, problems related to programs on an external USB hard drive. Plug before starting the system is likely to solve the problem, but I found another one: open the file of the volume that is affected, then try to eject safely in the notification area, which will fail because a file is opened. This brings things in order for whatever reason I don't know currently...

• When to reboot after deleting or adding a program

  I'm doing a system reformat on my computer. I would uninstall all the frivolous programs that came with the computer (for example, the evaluation version) until I put a new system restore point. My question is: if I have TO RESTART my computer after EACH program I uninstall it from the control panel (Add / Remove Programs)? OR can I just "delete" them all at once, then do a restart.

  Similarly, can I restart my computer after EACH application I have installed? For example, to install Norton 360 > restart > then install MS Office > restart > then install Adobe Creative Suite > restart > etc, etc. ?

  I personally would like to always re - start when asked.

  Not all programs will require a reboot after the installation or the removal, so in your situation I would re - start when you are prompted.

  If you don't re - start whenever there is a (small) possibility that some files can not be erased when you re-boot.

  If you are looking to get rid of all the pre-installed stuff, look for a program called "de-Crapifier PC", I have not used it myself, but it seems to have a lot of comments and recommendations in all popular PC press.

  HTH

  Neil

  www.nwarwick.co.UK

• Problems with uninstalling programs bringing UAC control dialog box

  I want to uninstall Mozilla Firefox, but when I point out that in my list of installed programs and then click on 'uninstall', I get the following 'User account control' popup ' a program wants your permission to uninstall the following application: Microsoft Windows.

  In other words, he seems to want to uninstall Microsoft Windows rather than the program that I've highlighted - Mozilla Firefox. This also happens when I tried to uninstall other programs/applications on the list - it always seems to think that I want to uninstall Microsoft Windows instead.

  I hope that I have explained this clearly!

  DRM for any help

  I want to uninstall Mozilla Firefox, but when I point out that in my list of installed programs and then click on 'uninstall', I get the following 'User account control' popup ' a program wants your permission to uninstall the following application: Microsoft Windows.

  In other words, he seems to want to uninstall Microsoft Windows rather than the program that I've highlighted - Mozilla Firefox. This also happens when I tried to uninstall other programs/applications on the list - it always seems to think that I want to uninstall Microsoft Windows instead.

  I hope that I have explained this clearly!

  DRM for any help

  Maybe you want to ask the same question to the FireFox forums:

  Support Firefox, Mozilla Forums:
  http://forums.mozillazine.org/viewforum.php?f=38

  Mozilla Firefox Forum
  http://www.firefoxforum.com/

  Firefox Support Forum
  http://support.Mozilla.com/en-us/questions
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Added by program review and application on BB App World notes

  Hello

  My requirement is simple, what is someone has an idea about adding review and/or progratically of ratings through your application that has been downloaded from BB App world?

  We provide users with a button or Menu item programmatically, add your opinion and/or add ratings for the same application on BB App World?

  concerning

  Abhishek

  None

• Hide fields added by program

  Hello
  
  AR, ARIHOMEPAGE - there is an area on the right side of the Page with new information, FAQ, policies. My requirement is to hide this region.
  I found a note in metalink for this: 396723.1-, but only until the 11.5.10.3
  
  We are on 11.5.10.7RUP and this region was created programmatically to CO.
  In CO, while creating web beans, ids are not defined. and so an extension, it's not possible to get managers for these items.
  
  OACellFormatBean oacellformatbean7 is createWebBean (OACellFormatBean) (oapagecontext, "CELL_FORMAT", null, null);.
  oacellformatbean7.setVAlign ("Top");
  oacellformatbean7.setStyleClass ("OraBGAccentLight");
  oarowlayoutbean.addIndexedChild (oacellformatbean7);
  OARawTextBean oarawtextbean is createWebBean (OARawTextBean) (oapagecontext, "RAW_TEXT", null, null);.
  
  oarowlayoutbean is created also by program with no id.
  
  Please let me know how to hide these fields. Thank you!

  Not recommended, but if you have no other choice, then you can follow below aproach.

  Create a custom controller by copying all the seeded controller code and make changes to meet your requirement.
  Apply to this controller of customization.

  Kind regards
  RAM

• Full administration must off UAC?

  On another forum has a photo editing software for some tech support person tell everyone that they must stop their UAC before running a program with admin access because it's the only way to get full admin access.

  Is this correct?

  UAC prevents still certain functions happen even if you run the program as administrator?  What is a bunch of hooey?

  I would like to know, because if it's not true then I would stop the Advisor.  I know a few people who have decided to just simply give up the UAC because they thought he did more harm than good because of this post.

  All directors have administrator access total - there are not different types of administrators.  It is true that the built-in Administrator account has access more than all other administrator accounts you can do, but you can't duplicate this account (you can't give these rights to any other account) and it should be left disabled unless necessary emergency - not for something like this (and you certainly don't want to activate the built-in on all systems administrator account and let their permits or for) the worst let people use it as their main account).  There is a security risk and it gives you also no help if you have problems with your other administrator accounts.  Moreover, 'extra' rights is essentially the ability to bypass the UAC restrictions easier (it doesn't add additional rights or access) but not all - UAC can always block even this account.

  There are programs that have problems with the UAC.  Generally, these can be corrected by contacting the manufacturer of the program and explainiing the problem and they will often have a solution that will solve the problem without disabling UAC (which I recommend strongly against). In addition, there is no guarantee the built-in Administrator account would be more successful than ordinary administrators with these programs.  Some, however, continue to have problems that even the manufacturers cannot solve - it is rare, but there are.  This can often be corrected by adding the program as an exception of UAC, but even that doesn't always work.  In these cases, the best choice is to find a different program that does not cause the problem.

  I can't advise you what to do here; However, I strongly suggest you do not use the built-in administrator accounts (if they even solve the problem) and most strongly recommend that you not disable UAC.  Find out what can be done and see if there is another way to do it without disabling UAC.  If you decide to disable UAC when using the program, at least make him a policy it can only be disabled when you use this program (or better, only when you use the functionality of the program that blocks the UAC) and must be reactivated immediately after use is made.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Package of added value and Windows Vista 64-bit on Satellite P200

  Hello, recently I changed Windows version of 32-bit to 64-bit. Everything works perfectly except PPV.

  When I try to install it, it produces an error message that says:

  ID_ERR_NOTINSTALLTVALZ_MESSAGE

  I found in some old discussions that I should update my bios, so I downloaded most recent bios, and when I tried to update, the pop-up message that I already have this version.

  I did some research and I found some drivers for the 64-bit version - [link to driver | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 746 & selSho rtMod = null & language = 13 & selOS = 27 & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 61866 & DISO = 27 & driverLanguage = 13]
  and in the statement, he said that I should
  "It's only the driver of value added package for 64-bit computers. Installation instructions: 1. unzip the zip-> 2. Right-click on the "TVALZ_O.INI" file-> 3. After a right-click on the file, choose "Install" from the context menu. »
  But when I do that there is an error message that says that this INF file selected does not support this method of installation.
  I tried to install it in safe mode, but the error is the same.

  Maybe I should put these drivers in a specific location? If Yes, where?
  Who can I install everything first? VAP installation for 32 bit, then driver for 64-bit? Or maybe the other way around?

  If someone could write me a clear instruction how step by step, I would be really grateful.

  My system: Windows Vista 64-bit Ultimate with SP1
  My Notebook: P200 series

  Best regards, Paul of the Poland.

  Hmm, I wonder about this sentence
  > I've done some research and I found some drivers for the 64 bit version

  What is your laptop model number? Have you chosen the right Toshiba VAP for the right notebook series?

  If you have chosen the correct drivers (for the right notebook series) then try to copy the extracted files in the folder of Toshiba Value Package added to programs-> Toshiba-> Toshiba Value added Package.

  Then try to run the ini file as described on the page of the European driver Toshiba.

• I can not manually remove a particular program to add tool / remove programs.

  I use XP Pro . Pack 3.

  All, but I can't manually remove a particular program from the add tool / remove programs. The program is "Ulead VideoStudio 8.0"

  The registry of the program given below entry between the quotation marks. I ran Microsoft FixIt (diagnose and correct program installation and uninstallation problems automatically) and she confirmed she fixed the error with success, but as I retried to remove said adding tool program / remove programs, it still reflects the same as we. The problem by deleting this program remained pending.

  SYMPTOM:

  I TRY TO REMOVE THE PROGRAM FROM THE ADD REMOVE PROGRAMS TOOL,-instead of OPEN the "UNINSTALL PROGRAM", SETUP PROGRAM OPENS RATHER AND ALSO request THAT THE registration KEY into the HOUSE.

  AS I ENTER THE KEY of RECORD, THE PROGRAM CONTINUE to INSTALL , BUT ends UP WITH a BOX of DIALOGUE of MESSAGE LIKE "'THE PROGRAM IS ALREADY INSTALLED IN MY COMPUTER:" "

  SO I HAVE NO OTHER CHOICE LEFT BUT TO STOP THE INSTALLATION (IT IS NOT AN UNINSTALL PROGRAM) WITH THE REST OF THE PROBLEM UNRESOLVED.

  NOW WHAT CAN I DO ELSE?

  Thank you & best regards

  Annick Torrecilla

  "

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\ {4F1DA6BF-3614-48A1-9970-9E90F646789E}]
  "UninstallString" ="RunDll32 C:\\PROGRA~1\\COMMON~1\\INSTAL~1\\PROFES~1\\RunTime\\0701\\Intel32\\Ctor.dll,LaunchSetup \"C:\\Program Files\\InstallShield Installation Information\\{4F1DA6BF-3614-48A1-9970-9E90F646789E}\\setup.exe\"- l0x9"
  "DisplayName"="Ulead VideoStudio 8.0".
  'LogFile '=' C:\\Program Files\\InstallShield Installation Information\\{4F1DA6BF-3614-48A1-9970-9E90F646789E}\\setup.ilg.
  "ProductGuid" = "{4F1DA6BF-3614-48A1-9970-9E90F646789E}".
  "InstallLocation" is hex (2): 43, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61, 00,------.
  6 D, 00, 20, 00, 46, 00, 69, 00, 6 C, 00, 65, 00, 73, 00, 5 C, 00, 55, 00, 6 C, 00, 65, 00, 61, 00, 64,------.
  00,20,00,53,00,79,00,73,00,74,00,65,00, 6 D, 00, 73, 00, 5 C, 00, 55, 00, 6 C, 00, 65, 00,------.
  61,00,64,00,20,00,56,00,69,00,64,00,65,00, 6f, 00, 53, 00, 74, 00, 75, 00, 64, 00, 69,--------.
  00, 6f, 00, 00, 38, 20, 00, 2nd, 00, 00, 00, 00, 30
  "DisplayVersion" = "8.0".
  "Version" = dword:08000000
  "MajorVersion" = dword:00000008
  "MinorVersion" = DWORD: 00000000
  "LogMode" = DWORD: 00000001
  "Exposeicon"="C:\\Program Files\\Ulead Systems\\Ulead VideoStudio 8.0\\uvs.ico"
  "Editor"="Ulead System."
  "VersionMajor" = dword:00000008
  "VersionMinor" = DWORD: 00000000

  "

  Hello

  Try the following steps:

  a. clean directory C:\Windows\temp.

  b. Uninstall anything to do with VS 8.

  c. clean all files in C:\Documents and Settings\ [UserName] Settings\Temp folder.

  d. Uninstall VideoStudio 8 by using the Control Panel Add/Remove programs.

  e. remove the folder {4F1DA6BF-3614-48A1-9970-9E90F646789E} c: \Program Files\InstallShield Installation information.
  (Make sure that you set "show the hidden files and folders" in the folder option in the OS).

  f. remove the folder "Ulead VideoStudio 8.0" folder in C:\Program Ulead System.

  g. click the Start button and select run.

  h. type regedit in the box and click on enter.

  i. remove the {4F1DA6BF-3614-48A1-9970-9E90F646789E} folder in
  KEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

  j. then reinstall program and all the patches (if necessary).

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://support.microsoft.com/kb/322756 ) How to back up and restore the registry in Windows.

• Windows Media Player 11 Date added function - please stop repeating the date for EACH file.

  I have been using Media Player 9, decided to upgrade to Windows Media Player 11, and the only thing I can not stand on Player 11 is how it sorts Date added media files.  In Player 9 when I chose the column Date added, the program would list all the files on a given under a SINGLE date.  With Windows Media Player 11 it lists EACH file with a date so that instead of see Tuesday, December 14, 2010 once and then listing all of the files under it, I see Tuesday, December 14, 2010 about twenty times.  I download podcasts once a week and dump it on my phone, but it's a worry now.  Is it possible to stop Windows Media Player 11 to repeat the date again and again and force him to the date that the list only once?  Think back to Player 9.  Alex

  Hi Alex103,

  It's design in Windows media player 11 and it is also included in Windows Media player 12.

  However, you can uncheck this option, follow the steps below:

  a. open windows Media player

  b. right-click on one of the sorted column

  c. click Choose column

  d. uncheck data added

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not possible to return to a recoverypoint after adding a progr

  Hello
  I added a program and another kidnapped. They do not work correctly if I want to use system revovery to return to a revoverypoint a couple of days.
  When I try with different points, I can answer "no hava no changes, is not possible to go back."
  How to solve this?
  see you soon, thanks Swingpjatten

  Swingpjatten,
  Welcome to the Forum of answers.  I would like to know if you are running antivirus software.  Sometimes, some programs may interfere with the system restore process.  If you have you can turn it off and then try to restore the system.  You can also try to create a restore point while the VA is running and see if she is able to finish.

  Let us know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Windows UAC compliance

  I use an application that is not compatible with UAC. Apart from the challenges that come with being not compatible UAC, is there a chance that Microsoft will say in the future that no - complaint UAC applications will not be allowed to run on future versions of Windows?

  Also, how it affect applications running on windows mobile or surface?

  Microsoft has never said that they want to restrict non - UAC to run programs, and I don't think that they will never be.  UAC is just a security technology so that programs don't get all the privileges that they do not need. In other words, they do not work "as an administrator", even if the user is an administrator. Most of the programs work very well as well, because the program doesn't really need access to make changes of nucleus at low altitude in any case.

  They cannot purely and simply block you from running programs without UAC, because as long as you are an administrator, you can do.

  Surface works exactly like a real PC, so there is no change.

  Windows Mobile cannot run arbitrary x 86 code anyway, it is essentially theoretical.  A mobile application is still running in a sandbox.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.