Adding SQL to filter

Similar Questions

• The effect we used to get by adding a red filter

  I use Lightroom for awhile now and have not found anyway to reproduce the effect that allows us to get by adding a red filter to our goal before taking a picture. Is this possible?  How?

  Split Toning set to 0 Hue is red. You can adjust the facts highlights and shadows separately and even set the balance point. Save it as a pre-configured with only Split Toning verified development or add something, you need to get the effect desired.

• OBIEE - SQL Expression filter does not at all - shows SQL but no result

  IM at my wits end for this
  
  I have a report where I use a filter with a simple SQL expression
  

  cast ( timestampadd(SQL_TSI_YEAR, -1, Cast(Cast(DATE '@{pv_as_of_date}{2013-04-01}' AS CHAR) AS TIMESTAMP) ) as DATE)

  If an end user can enter a date and it is passed into the filter through a variable
  
  pv_as_of_date
  
  This is set by default to 2013-04-01
  
  I want to subtract 1 year to make the final result
  
  2012-04-01
  
  When I run the report I see two problems
  
  (1) for displaying the filter at the bottom, I see the complete SQL code. This should not show that the returned date? In this case the filter should not show 2012-04-01?
  
  (2) the filter does not yet that is my biggest problem
  
  I tested the code above in a column and I KNOW the date is returned as expected
  
  But when I use the same SQL code in the filter then it does not work
  
  Am I missing some special button somewhere to allow SQL expressions?
  
  Any help hugely appreciated

  I don't see anything wrong in the expression, but when you might have questions

  Criteria over time. "' Academic year Desc" column-> filter-> Advanced-> convert it to SQL
  and use this expression.

• SQL does not pick up the reference sql plan

  Hello

  My version of the database is 11.2.0.03 64-bit quarter computer cart exadata

  I created a base line for an inefficient and then added SQL tips used to fix the plan and the new plan associated with the old plan sql_handle column. I am able to see the two plans (good and bad) present in the table dba_sql_plan_baselines as shown below

  Old
  --------------------------------------------------------------------------------
  Plan name: SQL_PLAN_fgky3z20smxzve27462bc         Plan id: 3799278268
  Enabled: YES     Fixed: NO      Accepted: YES     Origin: AUTO-CAPTURE
  --------------------------------------------------------------------------------
  Modified
  --------------------------------------------------------------------------------
  Plan name: SQL_PLAN_fgky3z20smxzve307ad0f         Plan id: 3808931087
  Enabled: YES     Fixed: YES     Accepted: YES     Origin: MANUAL-LOAD
  --------------------------------------------------------------------------------
  

  When I ask dba_sql_plan_baselines with the signature below is the output

  SIGNATURE SQL_HANDLE                     PARSING_SCHEMA_NAME            ENABLED ACCEPTED FIXED
  --------- ------------------------------ ------------------------------ ------- -------- -----
  16702659115126224891 SQL_e7cbc3f88189f7fb           SSO307010265                   YES     YES      NO    
  16702659115126224891 SQL_e7cbc3f88189f7fb           SSO307010265                   YES     YES      YES   
  

  I then checked gv$ sql and found the signature not displayed in the EXACT_MATCHING_SIGNATURE but the sql_plan_baseline is NULL.

  I'm not able to determine what am I missing.

  Can someone please help

  Thank you

  Jayadeep

  Yes, good point - this can be a factor.

  I noticed something similar once:

  https://OraStory.WordPress.com/2012/03/09/SQL-patch-III-plus-parallel-baselines/

  In this case, the profile of sql and sql patch can be worthy avenue, as mentioned by Lothar.

• Bulletins of update error: ' error: failure of the verification of signatures for: message XML Update SQL.

  Hi all

  I get this error when when looking for Windows newsletters (Patching-> Windows-> news-> news-> control upgrade). Looking at the Task Manager, I see "error: failure of the verification of signatures for: message XML Update SQL.

  I use the latest version vCM 5.8.2. I found another post here on this subject, which mentioned that the KB 2050220 fixed the problem, but it does not work for me .

  You have any other ideas I could try? Where would the real logs that could help me understand what the problem?

  Thank you.

  Well, what it fixed.  Looked in the debugging information, and indeed it was related to the KB 2050220:

  Level: error

  Time: 17/04/2016 10:53:43:460

  ClassName: clsPatchVerification

  FuncName: VerifyPatch

  MSG: (0) downloaded the file: C:\Program Files (x86)\VMware\VCM\Sum\Collector\SUM2_postxml.sql.cab has not a signature of trust manager of Configuration of VMware. Certificate IssuedTo: The issuer of the certificate VMware, Inc.: SHA2 DigiCert assured ID Code signing CA

  SourceDesc: UI

  RequestId: default

  JobId:

  JobMachineName:

  The problem with the added SQL KB is it is old... is no longer reflecting the reality, as the certificate of the cabin has now SHA2 DigiCert assured ID Code Signing CA, and not DigiCert assured ID Code Signing CA - 1 as written in the query SQL attached to the KB.

  That's why we:

  Original VMware KB:

  SET QUOTED_IDENTIFIER ON

  SET ANSI_NULLS

  IF NOT EXISTS

  (

  SELECT *.

  OF dbo.ecm_sysdat_certificate_configuration_settings_ui

  WHERE configuration_name = "DigiCert assured ID Code Signing CA - 1"

  )

  BEGIN

  INSERT INTO dbo.ecm_sysdat_certificate_configuration_settings_ui

  (

  configuration_name,

  configuration_description,

  is_subject,

  is_issuer,

  is_configuration_allowed,

  last_modified_by_id,

  last_modified_datetime

  )

  VALUES

  (

  "DigiCert assured ID Code Signing CA - 1",

  NULL,

  0,

  1,

  1,

  NULL,

  NULL VALUE

  )

  END

  GO

  FIX:

  SET QUOTED_IDENTIFIER ON

  SET ANSI_NULLS

  IF NOT EXISTS

  (

  SELECT *.

  OF dbo.ecm_sysdat_certificate_configuration_settings_ui

  WHERE configuration_name = "SHA2 DigiCert assured ID Code Signing CA"

  )

  BEGIN

  INSERT INTO dbo.ecm_sysdat_certificate_configuration_settings_ui

  (

  configuration_name,

  configuration_description,

  is_subject,

  is_issuer,

  is_configuration_allowed,

  last_modified_by_id,

  last_modified_datetime

  )

  VALUES

  (

  "DigiCert assured SHA2 Code ID signing CA",

  NULL,

  0,

  1,

  1,

  NULL,

  NULL VALUE

  )

  END

  GO

• Saved, customization and new quick filter

  Hi all

  Users save customization on a specific dashboard page. We have added a new filter in the line of this page and now all users are complaining that customizations that are saved are no longer works.

  They are re-recording of their customization, but is there a way to not break their customizations saved in the future?

  Thank you

  Added a new column to invite... I don't think that saved customization will not longer work. When you add a new column in existing saved customization will not work as you have changed the physical structure of the command prompt. I'm not sure whether any work around is there for that. for most it won't. Saved customization will generate a file in the catalog, as well as reports and guests. You cannot identify it by the registered name will somehow decoded. They will have to recreate. Either you delete the files in the path or they can remove it from their end if it is not shared.

  Thank you

  AJ

• Memory leak / your system is out of memory in Premiere Pro, TEA when you add timecode filter

  Hello

  I have leaks memory when exporting with Adobe media encoder. Everything has been export perfectly until I've added a timecode filter on the clips.  I see that others have various problems with export of clips with light effects. Has anyone experienced this problem with the timecode filter / solutions?

  My system specs

  Yosemite 10.10.5 OSX

  iMac, retina 5 k, 4 GHz Intel core! 7

  32 GB memory

  AMD Radeon, R9 M295x 4096

  Adobe CC 2015 - installed 2 weeks ago

  * Yes, I filed a bug report *.

  

  

  This problem has been fixed in Premiere Pro 9.2

  Thank you

  Regalo

• The use of the repository variable date in filter expression

  Hi gurus

  I get the error using repository variable date in filter expression. I use the formula below

  filter (with the HELP of Fact.calls"Sun Time".) ("' Fiscal months end date" = VALUEOF ("month_start"))

  I am getting below error

  The formula syntax is not valid.
  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 22024] A comparison is performed between incompatible types. (HY000)
  Publ. SQL: SELECT filter (fact. Calls by using "Sun Time" ". Fiscal months end date"= VALUEOF ("month_start")) 'call DATA.

  Then I tried the below format I still get the error

  filter (with the HELP of Fact.calls"Sun Time".) "" Fiscal month end date "= DATE'(VALUEOF ("month_start"))") "

  The formula syntax is not valid.

  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 46047] DateTime (VALUEOF("month_start")) (VALUEOF("month_start")) value does not match the specified format. (HY000)

  Publ. SQL: SELECT filter (using "Sun Time" Fact.Calls. ("' Fiscal months end date" = DATE '(VALUEOF ("month_start"))') 'call DATA.

  Please let me know what I'm missing or what is the correct syntax of same using the repository of date variable.

  Thanks in advance

  Concerning

  @li

  filter (with the HELP of Fact.calls"Sun Time".) ("' Fiscal months end Date" = CAST (VALUEOF ("month_start") date))

  Try this

  mark, if this can help

• Filter for getAllVmFolders()

  Hello

  for the method of getAllVmFolders() of VcPlugin and SDKConnection, there are two available parameters:

  additionalPropertyFilters (String table)

  Query (String)

  Can someone give an example how to use?

  (In my case, I have several SDKConnections and several data center in there and I don't need that records of a special data center)

  Thanks in advance!

  See you soon,.

  Joerg

  Hello and happy new year! I'm sorry to hear about the difficulties caused by this example.

  1. the solution is this - just write the same model of research without / / and it will work.

  The problem is in / /-/ /-selects the nodes in the document from the current node that match the selection, regardless of where they are. The use of / / is bad idea for production, this means any object tree will be covered (at the level of the bean) and make a lot of calls remotely.

  2. the VCO team will do the following for vCO 4.2

  (1) the absence of documentation problem will be fixed

  (2) this concrete use cases will be prevented at the code level, because it is totally unacceptable.

  3. important: If you called this workflow, you will have difficulties to terminate, because the XPath method calls is beyond the level of Rhino. If the workflow is with the behavior of the server restart - resume execution of workflow, please make sure that you changed it to "not to resume the flow of work performed" before restarting. "

  Finally, on the first parameter - this is just a hint, the system will give the same results with and without it.  It allows to specify the properties that will be added to the filter property default. This will prevent additional calls to the remote server. If you pass null (or empty table) it will always load some default properties. You can see them by searching for [FiltersManager] in the console outpuit. It's a good idea to specify the same properties that are involved in the search of XPath in the table.

  Kind regards

  Konstantin Spirov, vCO team member

• ODI - SQl Server 2005

  Hi friends,
  
  My source is: SQl server 2005
  Target: Oracle
  
  I would use LKM: Sql for oracle? It works in this case? If it works with little change in the ODI knowledge module, please guide me.
  
  I use Oracle CKM, IKM: added Sql command.
  
  Thanks for your comments.

  LKM SQL for Oracle works perfectly to your needs, without having to change.

• How can I execute commands stored in a sql file

  Hello
  
  I have a problem with the execution of one or two lines of a file after you save SQL and then brought back in SQL Developer. The sequence of what I do is
  
  By selecting file > new > layer database > SQL file opens a file to me than I can name. In the window that appears, I can get into SQL, and then click the green arrow to run a line or I can run all of the script. I choose the database connection to use, and it works fine.
  
  Now my problem is that I have after registration of this file and the setting again in SQL Developer I lose out on all the features that I had when the file was opened before.
  
  Save the file, exit, start SQL Developer and select file > open. I choose the file and unlike before, it appears only in a regular window that does not allow me to run. I can't just choose a line to run all I can do is go run on the menu and run the entire file.
  
  Is it possible that I can make in the file and opened it in a window which allows me to run commands as I could when I first created the file.
  
  Thank you
  
  Richard
  
  Published by: user8662445 on August 29, 2009 05:21

  >

  My question now is why it does not add a 'sql' file name? I was in the box to name a new sql file. It allowed me to enter a file name, but then instead of adding "sql" in the extension he just that added file name and does not itself give an extension.

  Anyone who has tried this? Looks like a very unusual thing to do. I've never seen a request which just added "sql" in the name of the file when it should have given the file extension ".sql".

  I have never tried before. I usually use "Save as" to a spreadsheet.

  I just tried now and I can reproduce your problem. This is clearly a bug. If you have a support contract, you can trigger a SR in metalink, hope also one of here development team picks it up.

• How to remove the Order By clause

  How can I get rid of the Order By clause in the underlying SQL query? I created a simple hierarchy, but when I use the hierarchy in the analysis and then come down, the results show multiple occurrences of each child. For some reason, I was able to reduce the number of occurrences of each child by adding a saved filter.

  I was expecting this:

  

  Instead, I got this:

  

  The generated physical query looks like this:

  SET VARIABLE QUERY_SRC_CD = "report"; SELECT s_0, s_1, s_2, s_3, s_4 s_5, (FROM s_6)

  SELECT

  s_0 0,.

  CAST (NULL AS VARCHAR s_1 (1)).

  "Registration - College". «Dimensions of the inscription '.» "' Exercise ' s_2,.

  'All the colleges' s_3,.

  IDOF ("registration - College". «Hierarchies of the inscription '.» "College". ". ("' S_4 all Colleges").

  MOUNT s_5 (NULL AS DOUBLE),

  "Registration - College". "" Counties of schooling. "" Full-time student "s_6

  "REGISTRATION - College".

  UNION ALL

  SELECT

  1 s_0

  "Registration - College". «Dimensions of the inscription '.» "" Name of College "s_1,.

  "Registration - College". «Dimensions of the inscription '.» "' Exercise ' s_2,.

  'All the colleges' s_3,.

  IDOF ("registration - College". «Hierarchies of the inscription '.» "College". ". ("' S_4 all Colleges").

  IDOF ("registration - College". «Hierarchies of the inscription '.» "College". ". ("' S_5 College ').

  "Registration - College". "" Counties of schooling. "" Full-time student "s_6

  "REGISTRATION - College".

  WHERE

  ("Registration - College". «Dimensions of the inscription '.» ("' Exercise ' IN ('201213')) AND (IDOF ("registration - College". «Hierarchies of the inscription '.» "College". ". (("' Colleges ') (1))

  ) djm ORDER OF 1, 3 ASC NULLS LAST, 4 ASC NULLS FIRST, 5 ASC NULLS FIRST, 2 ASC NULLS FIRST, NULLS FIRST CSA 6

  EXTRACT FIRST 10000000 LINES ONLY

  HI mbengue,.

  Check the report you are running any column presentation sorted in the user interface (in which case the order by clause will creep into generated sqls Physics). Also, I think that its worth it to check the settings of the hierarchy you have configured and if the installation program for the calculation of the measured column (number of students in this case), has been done correctly.

  Kind regards

  Arko

• Hide or show rows in the table with AppleScript?

  I have a large table number, and I sometimes want to display the entire table and sometimes select a group of lines to hide or show, to make the display of data more convenient.

  By selecting many rows to hide is tedious (there are many, and they are not contiguous).  So I would use AppleScript to do this.  But in the numbers AppleScript dictionary, I don't see any way to apply an attribute "hidden" in rows, columns or beaches.  Y at - it a trick I'm missing?  Or it simply not exist in the current implementation?

  Thank you

  AFAIK, you can't hide a line or set a height of 0 using AppleScript, although I suggested that any time via numbers of > provide comments numbers in the menu.

  What you could do is filter the table to hide the lines, probably by adding a column filter designating the lines that you want to see (or, conversely, hide).  This filter can be turned on and off via AppleScript using the filtered table property, although it would probably be easier to do via the integrated interface.

  SG

• Unable to play/read CD, Media not found error.

  Unable to play/read CD, Media not found error. I have a HP DV5000 with a DVDROM 4084N and works on Windows Vista Edition Home Premium. I have searched and tried the FIXIT, remove the filter upper rendered the DVD cannot play, adding the lower filter PxHelp20 made unrecognizable car, remove both filters completely unusable, the player. The DVD portion will format, but not burn DVDs. Installation and update the device driver do not work, nor does to replace the Mitsumi CD-ROM driver. The drive works because after following all the tips, my computer died, and I could use my boot on drive drive to reinstall Vista (new installation). The irony is that it is my Microsoft Office 2003 disk that I need to be reinstalled. Any suggestions other than what I have already read & tried would be much appreciated.

  Hi Bib72,

  Follow the steps below:

  Method 1: Follow the steps mentioned in this article and check if it works.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps!

• WMP is NOT recognize m4a music

  I just did a clean install of Windows 7. Trying to play Apple Lossless m4a. WMP has NOT played out of the box, if AAFC did.

  Finally got ALAC plays by adding in a filter Quicktime/WMP flea market. But now all my w4a files appear in other media ' "WMP... not under 'music '. So part of my music (mp3) are in the folder music, with all the correct information and album art tags and the majority of my music (m4a) are in the "other media" could not be added to playlists. WMP recognizes tags, it doesn't show them as in 'Music '.

  I found what I was hoping would be a work around. When a m4a is renamed to be a Mp4, it appears correctly (that is, under the 'music'). However, WMP will NOT play a file with extension mp4. SO I know the m4a will appear in 'Music' with a change of extension, the tags will show all the way to the top (including album art), should be, he won't play. Change back to m4a, he plays very well, but it gets moved to the wrong place ('other media') and all music Formatting disappears.

  How can I get WMP to add m4a to the area of music rather than other media? Or how do I add a media type to WMP so he treats a m4a a mp3 or mp4?

  Thank you!

  Hello

  The .m4a extension is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  For more information you can visit the link to the forum below.

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/1e483280-014f-413D-9F5D-6eb6041000c4

  Thank you, and in what concerns:
  Suresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.