Adding text of entry during execution

Similar Questions

• Can I create multiple dynamic entries during execution?

  Can I create multiple dynamic entries during execution?
  
  Oracle 11g
  Request Express 4.0.2.00.06
  
  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.
  
  So to do this I would like to create:
  
  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)
  
  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")
  
  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  
  Other things to note is that we would like this be on one page.
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  
  No idea how I might accomplish this? Is there a better way to do this?
  
  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.

  Welcome to the Oracle Forums!
  >
  Can I create multiple dynamic entries during execution?

  Oracle 11g
  Request Express 4.0.2.00.06

  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.

  So to do this I would like to create:

  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)

  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")

  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  >
  Creation of dynamic Page elements is not available. You must create surplus items and hide/show, etc. But you cannot change the element Type. Overall, too many restrictions in this approach.
  >
  Other things to note is that we would like this be on one page.
  >
  The limit of 100 points will hit you if you go with extra page element. With the form of tables that should not be a limitation, unless you're exceeding the limit of 50 APEX_APPLICATION point. G_Fnn points and limitation of the 60 column of the region report with "(analyze the query executing only) use generic name column" in the dynamic region.
  >
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  >
  If the type if the item is variable, that doesn't mean that you have to type a way to store the item. Metadata of meta data.
  >
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  >
  Yes, you can do it. Update report / query in a table can be built from the metadata using the SQL query that returns the PL/SQL function . It will be a bit of coding in PL/SQL where you use metadata and metadata of Meta data to restore your SELECTION with the right APEX_ITEMs. He might have a decrease in performance associated with it, but it will not be a serious degradation.
  >
  No idea how I might accomplish this? Is there a better way to do this?

  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.
  >
  I guess it's just a good TNF. This is the master model / retail Design, sounding more modern? ;)

  Kind regards

• C# takes arguments & reporting during execution of the text file

  I have a text file with the following text:

  int A = 5;
  Dim str As String = "tempstring;
  15, 16, 20, 22 DosomeMethod str.

  When you read the text through my program file, I want to declare int A = 5 & Dim Str as string = "tempstring" during execution.

  It can be as

  String [] st = freader.readline ().split(' ');
  If (st [0] is "int")
  {
  Str [0] str [1] = str [4];
  }

  I know that the above is the wrong syntax, but I want to do something like that with a few references.

  Can someone help me without using the .net irony?

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en/categories/

• Search fields added during execution

  Hi all

  I use Jdeveloper 12 c on internet explore 10 with 11g database on 64-bit.

  I followed the link as a tutorial.

  Oracle JDeveloper 12 c (12.1.2) tutorials - developing rich Web Applications with Oracle ADF

  step 8

  Develop control data EmpDetails1 and expand the node named criteria below him. Select all the searchable attributes and drag it to the new page query.jsf . Create it as a query > Panel request ADF.

  I had two problems

  1. the generated fields are too big, I want to control their width, but I don't see any field in the search box, instead, I see "search fields added during execution.

  2. I want to o excluding some areas. How to make since I can't see any generated field.

  Kindly guide me with this.

  Thank you.

  (1) the width of the fields is controlled to the view object. To change the width, you change the width to display the attributes in the suspicion ui tab.

  (2) this ID controlled of the view object. To hide an attribute in the query panel you uncheck "queryable". See JDEV: af:query hide some attributes of query panel but show them the results table | JDev & ADF Goodies

  Timo

• Adding series to the table during execution?

  Newbie :-)
  
  I'm trying to add series to a chart during execution because the number of series to draw is variable and only determined once the XML of a HTTPService returns...
  
  My chart looks like this:
  
  < mx:PlotChart id = "mainChart" showDataTips = "true" width = "100%" height = "100%" >
  < mx:series >
  ...
  
  If I add:
  
  < mx:PlotSeries xField = "Size" yField = "CompetitorPrice" displayName = "Competitor price" / >
  
  then the data plots OK, but try to create the same AS serial does not work (nothing appears):
  
  var newSeries:PlotSeries = new PlotSeries();
  newSeries.xField = "size";
  newSeries.yField = "CompetitorPrice";
  newSeries.displayName = "SeriesAddedAtRuntime!"
  mainChart.series.push (newSeries);
  
  Debugging presents the new series added and it seems OK... but it does not appear on the graph. No errors.
  
  I tried mainChart.executeBindings (); and mainChart.validateNow (); with no chance, but I guess as to what is to be the case here, as you can probably!
  
  What Miss me something to force an update of the chart with the new series added?
  
  Thanks in advance
  
  John

  It is not displayed because the table is not aware of the change in ownership of the series. I think that to run the following steps (give an or take a few syntax errors):

  var set = mainChart.series;
  var newSeries:PlotSeries = new PlotSeries();
  ...
  Series.push (newSeries);
  mainChart.series = series;

• DragEnter added during execution

  Another question drag / move.

  I created containers when running, and I want to allow a user drag a new container on a canvas, then drag - move containers within this container.

  The problem is all the containers are built during execution, and I don't see how I can add dragEnter etc to it.  Here is the code I use to create the container.

      private function createFieldSet():Box{
              //  Returns a new Box container set as a field set
                   var newFieldSet:Box = new Box;
                   newFieldSet.width = 400;
                   newFieldSet.height = 50;
                   newFieldSet.setStyle("backgroundColor", 0xa5f48d);
                   newFieldSet.x = 0;
                   newFieldSet.id = idCounter.toString();
  
                   return newFieldSet;
              }
  

  So I want to allow a user to drag and drop into this new box once it has been created.

  Thank you

  Tom

  Before returning newFieldSet, follow these steps:

  newFieldSet.addEventListener (DragEvent.DRAG_ENTER, myEventHandler);

  If this post answers your question or assistance, please mark it as such.

• Disable the extended FIFO FPGA target during execution

  Hello

  I use a FIFO extended target in my FPGA to constantly calculate the derivative of a measured value (dB/dt). Thus the FIFO stores all values during time dt. This means dt determines the number of items in the FIFO and dB is determined by the actual value less the oldest value in the FIFO. It works well when I initialize with the code in figure InitFIFO.

  But the FIFO of compensation is not possible (see figure clearFIFO). In the while loop if "reset dB" is false, as the new value of B is written on the FIFO, then the oldest value is read from, for the number of items in the FIFO remain constant. To change dt during execution, I need to clear the FIFO and initialize it with a new length (number of items). I tried the next loop, but it does not work. The FIFO does not initilized with the elements. The length is zero and the loop counter for (#deltaB Length2) is 0.

  What I am doing wrong? Is there a better way to erase a FIFO during execution in the FPGA? I'm now stuck for 2 days with this problem and looking forward to any idea or suggestion.

  Thank you very much. Best regards

  Andy

  Hej,

  Thank you for your response. You were correct, that deltab FIFO length was 0 because the defalt value was zero. The problem is that in my host vi on the RT system I put DeltaB FIFO length in a loop of high priority and as you can see when I restart the FPGA, DeltaB FIFO length has a valid value (the code in figure 1 works well with a local variable of DeltaB FIFO length in the FPGA). But the variable to set the variable "reset dB" is under the control of the loop of low priority of the host vi. And there, I had an entry DeltaB FIFO length unwired.

  So, I learned that a control FPGA read/write unwired sends a '0' or resets the variable to its default value in the FPGA. I assumed that nothing is transferred and the last variable is retained if you let a control read/write unwired. Now, I learned of this stupid error!

  Thanks a lot again!

  Andy

• Graphical evolution of waveform changes during execution

  Hello

  I'm just started learning Labview graphical programming. It's so interesting that text-based programming.

  The first issue is of course acquire analyze and display. But on the screen how to change the X axis and Y, scale of the axes during execution values.

  Maybe you should b a little more clearly what kind of values you want to change. (range, offset, multiplier, etc..)

  For example, to change the interval-y, yscale user property...... minimum or maximum range. The interval-x is a little more complicated, because you're dealing with a graph, when the x offset the changes automatically the history buffer is updated.

  Of course you must also make sure to disable autoscaling, else it will be for the next update.

  You can also change the formatting of the x axis. at the moment you show zero decimal digits. Also an axis 'style' with a few values more would be better.

• Deletion of added text

  I opened the paint when you view a picture and added text to the image.  Then, I saved the image.  Now, I want to remove the text.  I can't click on the text box to remove the text.  Someone at - he found a way to remove the text in the paint?

  This is because once the file is saved the text in the area is part of the image, it is only a layer separated during the editing session.

  Painting is a relative simple image editing tool, save the editing as separate not process or don't create undo functions that survive to the record. Once you do this generate you a complete picture and revised to replace the original, unless you use the function Save as and save it under a different file name.

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish

• Delete a misspelled word accidentally added to the dictionary during spell checking process

  How can I remove a misspelled word accidentally added to the dictionary during spell checking process in Adobe Photoshop?

  I thought that it would be in the related folder user ID. So I added a bad word ant the searched my files to the windows user ID. To search for the file. I found on mt 10 Windows system it has been added to.

  "C:\Users\Your user ID\AppData\LocalLow\Adobe\Linguistics\UserDictionaries\ATE user Dictionary\all\added.txt.

  Its a text file you edit cabin.

• Fill the programmatic view object during execution

  Hi all

  I have a requirement to switch between the three different data source during execution in a single page. The user interface and the field names are the same for these three cases, but data from various sources (queries).

  So, imagine that we have 3 objects in view which has implemented read-only (object request depending on the view) and we want to fill a display object at the main performance as a data source for my page.

  My idea is to use "Prgorammatic view object" for this data source and then fill dynamically the contents of one of the three objects view read-only based on a setting in the user's selection.

  First of all, I want to know if it is thin approach and if yes, then get some points on the implementation or any other sample.

  I found this example:

  http://techiecook.WordPress.com/2011/05/17/programmatically-populate-view-objects-in-Oracle-ADF/

  Thanks in advance,

  Nasser

  Hello

  It is more a case of use for Adaptive connections. See:https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf

  You can use EL to change the name of the ViewObject that an iterator in ADF queries its data. If the switch is on the link layer and there is no need for programmatic view objects. Unlike in the article of the blog above, VO 3 exist in your case then you don't need to create on the fly. Just change the name of VO in the managed bean referenced

  Frank

• ORA - 06502:numeric or of value errORA-04088: error during execution of trigger

  I received the following error message by entering a number in the maximum value (i.e. 9 999 999.) allowed in a data entry form that is distinct from the basic form:
  
  ORA-06502: PL/SQL: digital or error number precision value: ORA-06512 too big: "< owner >. < trigger >", line 194 ORA-04088: error during execution of trigger '< owner >. < trigger >.
  
  Where < owner > is the schema name and < Trigger > is the name of the trigger. The block of data in the application for participation is based on a database table, and the sum of all the values entered (with a maximum value of 99.999.999.) appears in the form of Basic. A grand total of this amount along w / other totals on the basic shape is also displayed with a maximum value defined as 999 999 999. Only, I get the above error message when the total is greater than 99999999. If the total is less than or equal to 99.999.999, the basic form works very well. Why?
  
  I checked all the attributes of the database columns and form fields and everything seems to be okay, and I'm out of my mind. I desperately need your help to solve this problem quickly because the pressure is on...
  
  Thanks in advance for any help.

  Orchid says:
  Hello Hamid,

  Thanks for your help. Yes, it works as suggested, after that I have increased the length of NUMBER data base table column (9) to NUMBER (11).

  gives you the correct answer, and you don't mark it ;)

  >

  Apparently, Oracle database truncates the decimal points and only update the value of 9 digits without giving errors, but the form of Oracle application is more picky and it generates forms and Oracle error messages when you run the application. It seems that there is a difference when executing the sql commands in the Oracle database and execution of these Oracle Forms application controls. Do you agree?

  Yes

  Thanks again for all the help.

  You can only give reward for it by checking the useful and correct answer.

• during execution of the page, I got the below error

  Hi gurus,
  
  During execution of the page, I got the below error.
  
  Error (14.8): wnsgs.oracle.apps.pa.projectinfo.server.NewManagerCustomTableEOImpl of the class should be declared abstract. not setLastUpdateLogin (oracle.jbo.domain.Number) method defined in the class oracle.apps.fnd.framework.server.OAEntityImpl
  
  
  Please help me its very urgent
  
  Thank you
  Sandrine

  Hi Liza,

  Please check your columns WHO that u added correctly or not in your OT If not added you please define the setLastUpdateLogin() method in the java file NewManagerCustomTableEOImpl.

  Thank you
  Deb

• Add fields dynamically during execution

  Hi Experts,

  Is it possible to add fields to the form layout during execution. say at the click of a button similar to the Acro forms where we addFields() and deleteFields() methiods. InstanceManager can add subforms, but it is possible to add fields at run time.

  Kind regards.

  Rohit

  Subforms by themselves do not nuch... .they contain content (as fields), so when you add a subform you're actually adding content in the subform. So to answer your question, you cannot dynamically add a field, but you can add a field indirectly by adding a subform.

  Make sense?

  Paul