Addition of 3 tools

Similar Questions

• Additional Color Correction tools

  Hello

  I tried to change the color on a makeup pencil tip as the joint. I had some success using settings of contrast of hue/saturation and brightness of approaching the colors I want. However, I feel that I need an additional tool to help me be more demanding. Is there someone offers? THX!

  Instead of brightness/contrast, you might want to check the curves.

  Keep in mind that adjustment layers can use like the other layers blending Modes.

• CS4 crashes when I send to print and pen tool loses the ability to maintain a multi striped line attributes.

  With the help of Illustrator CS4 (impossible to pass because the office that I contracted does not level) on a Mac under the Mavericks 10.9.5 (just upgraded to 10.6). CS4 crashes when I send to print (I was save as PDF and print only). In addition, the pen tool loses the ability to maintain a multi striped line attributes.

  For the second, deselect new Art has basic appearance in appearance (small triangle in the upper-right) Panel dialog box. With regard to the other you tried to delete and time the printer to your list of printers? In addition, since nothing sooner than CS6 has been tested with 10.9.x, the PDF method can be your only hope.

• Empty dialog boxes and missing text in tools

  Acrobat 10.1.8 - Adobe Creative Suite Standard

  Has several dialog boxes have become empty and fill the entire screen, for example the box that appears when a scan is complete.  In addition, when the tools are displayed (and the buttons on the toolbar for the tools are not there anymore) the icons but not the text.

  I guess it's either a police problem - maybe some fonts used by Acrobat have been deleted - or I have to download the prgoramme and reinstal it.  But I can't find a download site for Acrobat 10.  There is no problem with the other Creative Suite programs.

  What should do?

  Make sure that you have the complete Segoe UI font family. These aren't the Adobe fonts, but essential Windows fonts.

• Need help with the tool pen

  Hello, I drew something. I need to draw a line using the Tool Shed connected to a point I have already made. How can I continue with this point again.

  Additionally, sometimes the tool join does not. Why is this?

  N ° you cannot connect a closed to an open path path. You can just start at exactly the same point.

• Google was my search for default-now is gone also zoom in/out is gone?

  Suddenly, my default google search went - I have to type in for each search. In addition, the zoom tool is gone--I used just click on + or-, but it has now disappeared.

  If all you need to do is get a certain search plugin, can you not this one on Mycroft website and install it?

  • http://mycroftproject.com/

• log Analyzer?

  I have installed server for fun and learning.

  This year, he was attacked several times.

  The problem is that I don't spend much time to check the logs, take a long time before I realized it.

  Is there a Log Analyzer or something that alert when there is a problem as an IP attempts a password for several hours?

  As far as I KNOW, there is no built-in log reduction and analysis within the OS X Server tools.   There are additional log analysis tools.

  If OS X Server it has some features of firewall in this area through pfctl(8).

  Botnets easy to circumvent the usual types of reactive treatment, however, a single test every one of a zillion hosts works as well as a bunch of a host tests and is much harder to block.   That usually means setting up an external firewall or VPN services and reducing the number of ports exposed.

  Switch back to certificates where you can and learn more about what can do for the passwords.

• 160 GB external hard drive of Gigastore is not recognized correctly

  Hi, hope someone can help me!

  I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

  When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

  Phil

  Hello

  It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
  Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
  If please connect the HARD drive and use the Add Hardware option

• Portege M400 Virus - what to do?

  I posted this on another forum, but I thought I would post it here too:

  My Toshiba Tablet seems to be infected by viruses, and I have no idea what to do about it. I don't know a lot of computer terms, so I apologize in advance for my lack of knowledge... I also hope I have posted this in the right section.
  Here's what happens:

  I got the "blue screen of death", about two days ago, and when I turned my computer back on I noticed on the desktop there was an icon for "System Security 2009", which had not been there before. I clicked it and it opened and started to scan my computer. Then he said I have 38 virus, and then he is gone to a page where I can buy software to protect my computer - I read in another article that it is probably a scan. Is this true?

  My normal - Symantic Antivirus - Security also opened and said that I have viruses. Then internet Explorer opened several windows and after I turned off the computer. Once I turned the computer back on, the new "system security 2009" open again, and so did my Antivirus Symantic. Windows internet explore has not opened however. I restarted my computer a few times and got the blue screen of death once more. Now I have my computer and the security system is in place, but not Symantic Antivirus. In addition, on the tool bar (I think that's what it's called), I have several icons of tablet computer, and there is an icon system above safety messages reappear which say: "ATTENTION!" Application cannot be executed. The "(nom ne cesse de changer... mais à l'heure actuelle c' est 00THotkey.exe) file is infected." Please activate your antivirus software. »
  I tried to active Symantic but now it won't open...

  I read somewhere elsewhere on the deactivation of restoration of the system, or something in that direction, but I don't know what that means... it will wipe my computer of all of my files?

  I know that I might have to end up taking my computer to a professional, but I would really like to try to fix myself everything first... Thank you very much to all those who are willing to help!

  Hello

  Well, in my opinion you must remove all security software tools and system software. If you have Win P, then you might do this in Control Panel-> Add & Remove programs.

  To be honest, I had the Symantec Antivirus in the past, but I was really impressed because it would take too many resources and my laptop too long to start.
  Now I m using the tool called of Avira Antivir. This software antivirus free s one my laptop runs much faster.
  Install the Antivir and your operating system for some virus scan.

  Secondly if you n t have all important on your HARD drive and if you're not afraid to format the HARD drive then I would recommend reinstalling the operating system using the Toshiba recovery disc. The HARD drive would be the format and the whole process would take about 10 minutes. Then, you would get a cool reinstalled notebook as on the first day of purchase.

  PS: 00THotkey.exe is not a virus but a Toshiba process that controls the Toshiba Hotkey buttons... the Symantec Antivirus it recognized as virus but it is a warning of bad...

• Qosmio X 505-Q890 - where to find software of Toshiba?

  Hello

  I just got myself a Qosmio X 505 - Q890, and have a little problem that I need help. In the menu under Toshiba, I expect all software from Toshiba, but all I have is system of speech and under utilities is control HDMI and HDMI Out I thought a them lot more tools a utility if there is.

  Could you tell me what I should have, and if I can download them all at once.

  See you soon

  Steve

  Hey,.

  What Toshiba Software tell you exactly?
  Normally, all you need is preinstalled on your laptop, all that you can find on the version preinstalled Windows.

  In addition, all the tools and drivers, you can download from Toshiba Web site:
  http://www.CSD.Toshiba.com

• Tecra A10 - cannot install usb panasonic TDA drivers

  Hello

  I recently bought a laptop Tecra A10 on which I decided to exercise the choice of vista downgrade to windows xp pro.
  I am trying to connect to a system of telephone panasonic TDA via USB.

  When you try to install the drivers, the system ends by crashes after trying to install for about five minutes.
  I talked to panasonic technical support and they say that it is a known issue with installing windows xp OEM Toshiba and I have to get a good copy of xp to toshiba. Is there a patch so that I can do?
  If not, how can I do this and will be toshiba give me a full copy of xp pro?

  Any help would be appreciated, this is a real problem for me because my job requires me to connect to these phone systems on a daily basis. I don't want to lose faith in computers laptop toshiba because I think they are great.

  > I talked to panasonic technical support and they say that it is a known issue with installing windows xp OEM Toshiba and I have to get a good copy of xp to toshiba. Is there a patch so that I can do?

  I put t believe that. Why? Because the image of Toshiba is not very different from a clean Windows XP CD. Toshiba image contains only the driver additional Toshiba and tools that s all that you would need such drivers even if the own Windows XP would be installed the theory given by panasonic technical support is very, very strange

  > If not, how can I do this and will be toshiba give me a full copy of xp pro?
  You can order a picture of Toshiba in an ASP, but you won't get any own Win XP disks

  In your case, I would check the Windows XP updates
  In addition, you should check if there are a few new updates for this phone TDA system
  Also check if the BIOS is up to date, but to be honest, I doubt that it could have something to do with the BIOS

• Tecra M3 hibernate / standby not always working

  My new Tecra M3 can be seasonal - sometimes, it will be extended/upgrade standby standby, other times it won't. Have tried all the settings in XP and Toshiba Power Saver power options (when it is selected as theme in XP energy savings). Clicked Hibernate enable/disable - no difference. Sometimes, it works as it should, but most of the time it isn't. If you select in the actions, what to do when you press power button or close the cover, the problem is the same. Before a similar problem with a Compaq - perhaps incompatibility with the software running AV is Sophos, NetOp. In addition, makes no difference, if running on battery or AC. Any suggestions?

  [Edited by: admin August 16 05 19:12]

  Hello

  In my experience many additional programs and tools that are run in the context of the regime arrested the using hibernation.

• Satellite U500 - 10L - Windows must be activated

  Hello.

  I bought Satellite U500 - 10L of WATER and windows vista has been installed on it. After I bought the laptop by message 4 months appear telling me that windows is not original, and it must be enabled. I contact Microsoft but they told me to go to Toshiba and much in demand won't start and I tried to get into the series several times but refuse the windows.

  Now I need to know what I can do to fix that?

  Hello

  You use the preinstalled version of Vista or did you do your own installation? The key on the lower side belongs to the pre-installed Windows version and t can be used with other versions.

  If you are using the factory settings, this message shouldn't t appear. Did you install additional software or tools?
  You should try a system restore to an earlier point in this case. Maybe it helps

• Satellite L300 - no response keyboard and mouse after Windows 7 upgrade

  Hi all

  After a new Windows 7 Ultimate installed on my PSLB0E L300, I lost the use of the keyboard and mouse pads.

  I did the installation with a usb mouse, who also now works. I downloaded all the drivers connected to my machine using the virtual keyboard, rebooted after each installed drivre, still does not.
  I also updated the BIOS, 1.3-1.5, still does not

  The strange part is that I can't access BIOS with F2, or sequence of starting using F12 at startup, navigate through the BIOS, so the keyboard works, but no longer works when Windows 7 has started.

  I tried to put all the defaults in the BIOS, no change.

  Help! >.< going="" crazy="" over="">

  Hello

  Have you installed additional drivers or tools for these external devices? If so you should remove, just check the software list in Control Panel.

  Normally the touchpad can be turned on/off with the FN + F9 key combination.

  In addition, it would be interesting to know what is happening on the factory settings. I mean the operating system preinstalled by Toshiba.

• Cannot get out of Vision Assistant 2009 LabView code

  I use Labview 2009 in my laptop lenovo X 61 with Windows 7 (64-bit) is installed.

  I played a bit with Vision Assistant 2009 and results with my images are good enough. Now, I would get the same functions to work in LabView. I try to make 'tools' - 'create labview VI... '. "in the wizard of vision. All is well, to the point I should see the code. Vision Assistant opens the "Getting Started" Labview, but then nothing happens. I don't see VI in my folder specified and all stop there.

  If any of you have an idea how to solve this problem, I would be very happy.

  Tommi

  There is a known problem with the generation of code in Vision Assistant 2009. Check out this KB:

  http://digital.NI.com/public.nsf/allkb/DFB0B9C7F817D66386257626005A5825

  In addition, LabVIEW options (Tools > Options) make sure you Protocol ActiveX are activated and grant access to a VI called 'IVA create LabVIEW VI.vi' in the list of exported screws.

  -Christophe