addition of my application in alert Messages / other

Similar Questions

• A doubt about the alert Message...

  Hello
  
  I am very new to Oracle Forms & I use Forms 6i.
  
  As I practice some bases as 'Validation' a text element I went by a few examples of code to bring or poping-up alert messages...
  
  Here is my Code... in this I don't understand Y... .do write us the 'Message ('no msg')' line TWICE... ??
  
  Although I commented on the 2nd one... but there must write two times... & wat is the logic behind it...?
  
  Help, please...
  
  ---------------------------------------------------------------------------------------------------
  Begin
  
  If (: aijaz_emp_master.em_dob >: aijaz_emp_master.em_doj) then
  
  set_item_property ('em_dob', current_record_attribute, 'VA_ERRORS');
  
  -If (: aijaz_emp_master.em_dob is not null and (: aijaz_emp_master.em_doj >: aijaz_emp_master.em_dob)) then
  message ("DOB must b higher or NULL MJ '");
  -message ('wort upper b DOB or NULL MJ');
  
  raise form_trigger_failure;
  
  on the other
  set_item_property ('em_dob', current_record_attribute, 'VA_NOnERROR');
  end if;
  
  end;
  ---------------------------------------------------------------------------------------------------------

  MIRA,
  I agree that this can be a little confusing, but once you understand the difference between messages and alerts it will make sense.

  In Oracle Forms, a 'Message' is any information that is displayed in the 'Message' of the forms Console line and requires no interaction with a user. The console is displayed at the bottom of the window and includes the 'Message line' and 'Statue line. If the message line already has a message, and then forms will promote the message in an alert (popup window) and the nouveau/deuxieme message is displayed in the message line. In general, many forms developers will use this "Double-Message" method to display information in an alert because it is less lines of code to assign the text of the message in an alert and then display the alert. It is advisable to always call the built-in function Clear_Message() before calling Message built-in to prevent unintential * promotion message.

  An alert in a physical object in a form of Oracle (note: there is a 'Alerts' node in the browser of object of forms). There are three types of alerts of forms: Note, attention and stop. Display the notes information, precautions display warnings and errors off display program, or critical information. In order to display an alert, you must first create an alert object in the Alerts node. You can create an Alert object for each of your posts, but this creates clutter and can be confusing. I prefer to use three alerts - one for each type (Note, attention, Stop) and then programmatically set the title, the text of the message and the buttons (max 3). As you can see, there is more work involved to display an alert. In addition, the integrated Display_Alert() is a function if you need a variable to receive the value returned by the call to Display_Alert.

  Here is an example of using e-mail in the forms:

  /* Standard message */
  BEGIN
     Clear_Message;
     Message('Display in the Message Line only');
  END;
  
  /* Message to display Alert */
  BEGIN
     Clear_Message; -- make sure you don't accidentally promote a different message
     Message('Display in the Default Alert');
     Message('Display in the Default Alert');
  END;
  
  /* Message displayed in a Note Alert */
  /* Assumes an Alert of type "Note" has already been created. */
  DECLARE
     al_id      ALERT;
     al_btn    NUMBER;
     v_msg    VARCHAR2(200); /* Max Characters that can be displayed in an Alert */
     v_title    VARCHAR2(78);  /* Max title characters */
  BEGIN
     al_id := Find_Alert('Note');
     IF NOT ID_NULL(al_id) THEN
        v_title := 'This is an informational message';
        v_msg := 'This is an informational message that requires the user to acknowledge the message';
        Set_Alert_Property( al_id, TITLE, v_title);
        Set_Alert_Property( al_id, ALERT_MESSAGE_TEXT, v_msg);
        al_btn := Show_Alert( al_id );
     END IF;
  END;
  

  Personally, we have a library package, we have created to simplify the display of alerts and allows you to set the properties of the alert and display it in a single call.

  /* In this sample, I use named notation to
  illustrate the meaning of the different parameters
  in our wrapper package. */
  DECLARE
     al_button  NUMBER;
  BEGIN
     IF (:aijaz_emp_master.em_dob > :aijaz_emp_master.em_doj) THEN
        set_item_property('em_dob', current_record_attribute, 'VA_ERRORS');
        al_button := message_pkg.warning( TITLE => 'Warning: DOB Required',
                                    MSG_TEXT => 'DOB must b NULL or Greater tahn DOJ',
                                          BUTTONS => 'OK');
        raise form_trigger_failure;
     ELSE
        set_item_property('em_dob', current_record_attribute, 'VA_NOnERROR');
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere December 13, 2010 10:31

• Error: "address book has been locked by another application. Please, close other applications and try again.

  Original title: locked file on CD by an unknown application. How can I find?

  I burned my address book on a CD. When I try to open the file, I get the following message: "address book has been locked by another application. Please, close other applications and try again.  How can I find what is the other application?

  Hi JimSpell,
   
  This problem occurs if the Windows address book file used by Outlook Express is marked with the read-only attribute.
   
  Follow these steps to solve the problem.
   
  a. Click Start, point to find and then click files or folders.
  b. in the search for files named, type: *.wab.
  NOTE: If you find more than one .wab file, make the following changes for all files.
  c. click file .wab you find. On the file menu, click Properties.
  d. in the Properties dialog box, under attributes, clear the read-only check box.
  e. click on apply and then click OK.
  f. open Outlook Express and test a new e-mail message or try to access the address book.
   
  For more information, see:
  OLEXP: Error Message: failed to load address book
  Note: The information provided in this article are applied to Outlook Express 6 in Windows XP as well.

• Qnx.dialog AIR BB10 or any alert Message box?

  Hey guys,.

  Im having the hardest time with something very simple... dialog boxes! Theres something Im not getting and I hope someone here will know what Im doing wrong! Ive searched the internet, api docs, forums and still nothings working! The code below is on resources BlackBerry AIR website and does not display anything when I reference from a view. The development of the old mx playbook tablet. Alert dialog is displayed or the other?

  Any ideas? Thanks advance!

       private function showAlertDialog():void
       {
          alert = new AlertDialog();
          alert.title = "Warning";
          alert.message = "This operation may harm your computer. Do you still want to proceed?";
          alert.addButton("OK");
          alert.addButton("CANCEL");
          alert.dialogSize= DialogSize.SIZE_MEDIUM;
          alert.addEventListener(Event.SELECT, alertButtonClicked);
          alert.show(IowWindow.getAirWindow().group);
       }
  
       private function alertButtonClicked(event:Event):void
       {
            trace("Button Clicked Index: " + event.target.selectedIndex);
            trace("Button properties Object"+event.target.getItemAt(event.target.selectedIndex);
       }
  

  Resolved thanks. it Awsome!

• Alert message

  Hello!

  How to display the alert message?

  When I use Dialog.alert in my application class, the program crash.

  Thank you.

  use:

  Public Shared Sub errorDialog (final String message)
  {
  UiApplication.getUiApplication () .invokeLater (new Runnable()
  {
  public void run()
  {
  Dialog.Alert (message);
  }
  });
  }

  myScreen.errorDialog ("TEST");

• How to get the alert message while trying to open a file, folder, or drive?

  How to provide a warning message when opening a file, folder, or drive, such as I had in my disk recovery and back the file, but once I opened it, that message never came again, I want this parameters with some of my important files. so, how do you restore this setting? and how do you get to my files?

  Hello

  Thanks for posting the question in the Microsoft Community forums. According to the description, you need help to get an alert message when you attempt to open a file, folder or drive.

  The alert message you received disk and backup recovery file is supplied by the manufacturer.

  There is no message alert option in Windows. You can search for any third-party application, using your favorite search engine.

  Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information helps. For any help about Windows, you can still post on the Microsoft Community Forum.

• How to make the translation of from javascript alert messages

  Hello
  
  I'm working on a translation of an application, when you export the file .xlf pages he does not contain javascript alert messages
  
  and if we wanted any public static select radio button list, these static words are also not also exported in the xlf file.
  
  How to do the conversion from above?
  
  ANI

  Hello Ani,

  > its mentioned to add these two lines in the dads.conf file, is necessary to add?

  It is an old request, in order to regulate the use of some standard (at least at the time) of the HTML within the IE components. It is no longer necessary with the latest version of the APEX, as described in the following: http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#CHDHCBGI.

  > and also, he his city to perform "reset_image_prefix.sql" I have to run this also?

  This utility is intended to be used by those who have changed their alias for an existing installation. It should not be relevant in your case, that you do not change the aliases defined for the application of the primary language; you try to add a new alias for the translation (s).

  You should review the source code of a page of the translated application and see how the engine of the APEX translate the alias /ipt. Is the path in the exact source code? Points to the directory images_pt ?

  As the English version of the application works fine, it may be a corrupt metadata in the appropriate table of APEX motor. You can also try to remove the current map of the language (and eliminating the corresponding translated demand) and try to re - set. As the application of the main language is still the same, the 'old' translated still usable with the 'new' application XLIFF file.

  If all the rest does not help, please submit the relevant content of your dads.conf file.

  Kind regards
  Arie.

• Using the CAC security alert message

  Hello

  I keep on security alert message whenever my application connects to the LCC service indicating

  "Web site, that you are about to view uses a certificate that has expired or is not yet valid. You wish to proceed? »

  I don't think that this has something to do with my Internet, t - parameters it? Please advice.

  THX

  OK, the certificate is updated - we have still not completely finished, but for

  right now the dev Portal is back and I'm testing the rooms work.

  sincere apologies for the inconvenience - we take these problems really

  seriously.

  Nigel

• Where the das value the FQDN in OME Alert Message comes from

  If I place an alert Action to OME, OME provids the details of the alert Message to the script that I defined. In the alert Message, there are several types of information, such as Service number, alert and FULL domain name.

  Now, at one customer site OME reports for appliance name and domain FULL of different values. I was wondering where the FQDN value is taken. It is something of DNS or has he just iDRAC? If it comes to the iDRAC, I can configure it? Is this something I can configue on OME or iDRAC?

  OME performs a reverse DNS lookup.

  This is a list of name resolution that OME crosses top down

  1. If the inventoried by OMSA server then the FQDN DNS name servers
  2. iDRAC name DNS (Reverse DNS lookup)
  3. iDRAC (iDRAC host name parameter) host name
  4. IP address

  If you let the iDRAC registers in the system DNS enable this check mark.

  

• Alert message: you want to view only the webpage content that was delivered safely?

  How can I fix Vista so this alert message stops popping up on every email?

  This warning is for your protection, because it indicates that a part of the e-mail is downloaded more connection not secure. Whatever it is - please try this and see if it helps (although it mentions on Internet Explorer).

• Can just disable us the pop-up alert message "Windows - delayed write failed"? for example to change the pc registry policy or change etc...?

  Can just disable us the pop-up alert message "Windows - delayed write failed"?

  for example to change the pc registry policy or change etc...?

  not a virus infection problem.

  Our PC operating system have been using XP and Win7.

  These error message that we ran the backup with Windows XP and Win7 PC client process.

  Backup the software client PC named SSR 2011.

  Tom

  Hi Tom,

  The question you posted would be better suited to the TechNet community. Send the query in the link.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt#Forum=w7itprogeneral%2Cw7itprovirt&filter=AllTypes&sort=lastpostdesc&content=search

  Hope this information helps.

• Alert Message of blackBerry Smartphones won't go away!

  I have the Curve 8330 from Verizon, and I can't get the alert message unopened to disappear from the Welcome screen.  I have no no open message and the flashing LED is not, but the yellow envelope unopened with the number '1' will be not clear.  If anyone can offer advice, I would be happy!

  Remove your battery and so you and your phone will restart.  That should clear the alert message.

  Mimi

  ljs129 wrote:
  I have the Curve 8330 from Verizon, and I can't get the alert message unopened to disappear from the Welcome screen.  I have no no open message and the flashing LED is not, but the yellow envelope unopened with the number '1' will be not clear.  If anyone can offer advice, I would be happy!

• Is it possible to install windows applications on one drive other than C 8?

  I wonder if there is a way to install applications on one drive other than C? I have an SSD drive and I can't afford, space wise, to continue to install programs on my drive C. some applications seem to be useful, but if I'm forced to put on C, then I simply not going to use them.

  Some facts that you can easily check for yourself:

  Move your store of Windows Apps to another partition or a drive won't help you much. I just checked my test with 35 apps installed system, ranging from games to applications of online TV useless gadgets, taken solely on C:\Program Files\WindowsApps storage space total 2.6 GB.

  Move your desktop applications and programs won't you do much else. Check yourself how small correctly encoded software modern space takes. This test system has Office 2010 and Office 2013, two complete installation, two Professional versions, Media 6, Webmatrix and Visual Studio for coding, ten to twelve games etc etc, taken total storage on the HARD drive is only 9 GB (C:\Program Files 3.5 GB and C:\Program Files (x 86) 5.5 GB).

  This system of test of mine as stated above, so absolutely that each request, the office and the Windows store as could be moved completely to another disk it would free 11.6 GB of disk space.

  What could really help you instead is move / move your user folders or with sysprep move complete directory of main users with everything on it, including AppData. This is done by changing the values of a Windows Environment Variable and is a quick and simple procedure that puts all the future user records to a different location (http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html). The users folder is normally much greater than the combined app and program folders.

  In a normal computer, the issue is not the space applications and programs. Check for yourself if you haven't already and you will be surprised how little space your need to file applications and programs.

  Kari

  EDIT: I did a typo which has now been fixed: I don't have 135 Windows installed Apps taking 2.6 GB, but 35 Apps. I'm sorry.

• 4.1EA2 Exception alert message

  When I run a script which translates an exception, I get an alert message for the error that has occurred.

  Please, is configurable to not show? Output of the script is sufficient in my opinion.

  

  I agree with you. Weird regression a few weeks ago apparently.

  BUG

• Highlight a phrase of the alert message

  Hi all

  We have an obligation to highlight the alert message.

  Example:

  We have a reminder of expiry of visa alert.

  We must emphasize a phrase in yellow color.

  Can someone help me out with above?

  This confirms my assertion that HTML formatting is not possible as part OFA default message. Some messages that are not called in message seeded of the Oracle, calling routine in the OPS were delivered with HTML tags.