Highlight a phrase of the alert message

Similar Questions

• How to get the alert message while trying to open a file, folder, or drive?

  How to provide a warning message when opening a file, folder, or drive, such as I had in my disk recovery and back the file, but once I opened it, that message never came again, I want this parameters with some of my important files. so, how do you restore this setting? and how do you get to my files?

  Hello

  Thanks for posting the question in the Microsoft Community forums. According to the description, you need help to get an alert message when you attempt to open a file, folder or drive.

  The alert message you received disk and backup recovery file is supplied by the manufacturer.

  There is no message alert option in Windows. You can search for any third-party application, using your favorite search engine.

  Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information helps. For any help about Windows, you can still post on the Microsoft Community Forum.

• A doubt about the alert Message...

  Hello
  
  I am very new to Oracle Forms & I use Forms 6i.
  
  As I practice some bases as 'Validation' a text element I went by a few examples of code to bring or poping-up alert messages...
  
  Here is my Code... in this I don't understand Y... .do write us the 'Message ('no msg')' line TWICE... ??
  
  Although I commented on the 2nd one... but there must write two times... & wat is the logic behind it...?
  
  Help, please...
  
  ---------------------------------------------------------------------------------------------------
  Begin
  
  If (: aijaz_emp_master.em_dob >: aijaz_emp_master.em_doj) then
  
  set_item_property ('em_dob', current_record_attribute, 'VA_ERRORS');
  
  -If (: aijaz_emp_master.em_dob is not null and (: aijaz_emp_master.em_doj >: aijaz_emp_master.em_dob)) then
  message ("DOB must b higher or NULL MJ '");
  -message ('wort upper b DOB or NULL MJ');
  
  raise form_trigger_failure;
  
  on the other
  set_item_property ('em_dob', current_record_attribute, 'VA_NOnERROR');
  end if;
  
  end;
  ---------------------------------------------------------------------------------------------------------

  MIRA,
  I agree that this can be a little confusing, but once you understand the difference between messages and alerts it will make sense.

  In Oracle Forms, a 'Message' is any information that is displayed in the 'Message' of the forms Console line and requires no interaction with a user. The console is displayed at the bottom of the window and includes the 'Message line' and 'Statue line. If the message line already has a message, and then forms will promote the message in an alert (popup window) and the nouveau/deuxieme message is displayed in the message line. In general, many forms developers will use this "Double-Message" method to display information in an alert because it is less lines of code to assign the text of the message in an alert and then display the alert. It is advisable to always call the built-in function Clear_Message() before calling Message built-in to prevent unintential * promotion message.

  An alert in a physical object in a form of Oracle (note: there is a 'Alerts' node in the browser of object of forms). There are three types of alerts of forms: Note, attention and stop. Display the notes information, precautions display warnings and errors off display program, or critical information. In order to display an alert, you must first create an alert object in the Alerts node. You can create an Alert object for each of your posts, but this creates clutter and can be confusing. I prefer to use three alerts - one for each type (Note, attention, Stop) and then programmatically set the title, the text of the message and the buttons (max 3). As you can see, there is more work involved to display an alert. In addition, the integrated Display_Alert() is a function if you need a variable to receive the value returned by the call to Display_Alert.

  Here is an example of using e-mail in the forms:

  /* Standard message */
  BEGIN
     Clear_Message;
     Message('Display in the Message Line only');
  END;
  
  /* Message to display Alert */
  BEGIN
     Clear_Message; -- make sure you don't accidentally promote a different message
     Message('Display in the Default Alert');
     Message('Display in the Default Alert');
  END;
  
  /* Message displayed in a Note Alert */
  /* Assumes an Alert of type "Note" has already been created. */
  DECLARE
     al_id      ALERT;
     al_btn    NUMBER;
     v_msg    VARCHAR2(200); /* Max Characters that can be displayed in an Alert */
     v_title    VARCHAR2(78);  /* Max title characters */
  BEGIN
     al_id := Find_Alert('Note');
     IF NOT ID_NULL(al_id) THEN
        v_title := 'This is an informational message';
        v_msg := 'This is an informational message that requires the user to acknowledge the message';
        Set_Alert_Property( al_id, TITLE, v_title);
        Set_Alert_Property( al_id, ALERT_MESSAGE_TEXT, v_msg);
        al_btn := Show_Alert( al_id );
     END IF;
  END;
  

  Personally, we have a library package, we have created to simplify the display of alerts and allows you to set the properties of the alert and display it in a single call.

  /* In this sample, I use named notation to
  illustrate the meaning of the different parameters
  in our wrapper package. */
  DECLARE
     al_button  NUMBER;
  BEGIN
     IF (:aijaz_emp_master.em_dob > :aijaz_emp_master.em_doj) THEN
        set_item_property('em_dob', current_record_attribute, 'VA_ERRORS');
        al_button := message_pkg.warning( TITLE => 'Warning: DOB Required',
                                    MSG_TEXT => 'DOB must b NULL or Greater tahn DOJ',
                                          BUTTONS => 'OK');
        raise form_trigger_failure;
     ELSE
        set_item_property('em_dob', current_record_attribute, 'VA_NOnERROR');
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere December 13, 2010 10:31

• Error in the alert Message of blackBerry Smartphones

  Hello

  I have a new BB 8330 - it says I have 3 new messages, but when I check there is no "new" messages.

  Tried to remove the battery, but nothing seems to work.

  Any suggestions?

  Thank you

  PB

  Thanks for the help, much appreciated.

  But it has not solved the problem.  Past of 35 min. with the support of e, and just before we wiped the phone we tried something.

  Go into Office Manager upper-backup - advanced - and allowed the messagess in database.

  That solved the problem.

  Yes

• Is it possible to change the alert message default javascript '1 article has been added to your basket' to something nicer?

  Hey BC Community!

  Well, I may have missed in the docs (and if I have, please do not hesitate to show it to me) but I was curious to know if it was possible to change the default javascript alert popup that says "1 item added to cart" to something more pleasant as perhaps a green bar that temporarily shows downstairs which said "added to shopping cart." I would create a jquery script to intercept the default alert?

  Thanks in advance for anyone of you guys help!

  Hello

  Have you already checked this

  Customization of shop alert stations online

• Fire a partial Action is not happenning when I am clicking on the ok button in the alert message java script

  Hi gurus,

  I have a messageChoiceBean. Yes/No values

  I put Firepartial action on it.

  When I click on Yes, then opens a popup script java using javascriptLoader with a single message, when I click ok in the message, then it will bring me to my page, but then I need the firePartial Action should take, but this isn't the case.

  Please suggest what to do, help very urgent.please.

  Thank you

  Mahesh

  Hi friends,

  I used the code below in the PR and the issue has resolved:

  OAMessageChoiceBean msb = (OAMessageChoiceBean) webBean.findChildRecursive ("Answer3");

  msb.setFireActionForSubmit ("update2", null, null, true, false);

  Concerning

  Mahesh

• Create the alert message

  Hello

  If my indesign file "missing fonts', 'Missing links' and"Text overflow", I have to give the warning by script. Is this possible?

  by

  hasvi

  Hi Hasvi,

  Here's the answer:

  if(app.documents.length == 0)
  {
      alert("Please Open the Document");
      exit(0);
      }
  
  var myDoc = app.activeDocument;
  
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
  
      var myUsedFonts = myDoc.fonts;
  
      for (var i = 0; i < myUsedFonts.length; i++) {
      if (myUsedFonts[i].status != "1718831470")
      {
          alert("Please Fix Missing Font")
          exit(0);
          }
      }
  
      var myUsedLinks = myDoc.links;
      for (var i = 0; i < myUsedLinks.length; i++)
      {
          if (myUsedLinks[i].status == LinkStatus.linkMissing || myUsedLinks[i].status == LinkStatus.LINK_OUT_OF_DATE)
          {
              alert("Please Fix Missing Link");
              exit(0);
              }
          }
  
      var myOverflow = FindOverflowText();
      if (myOverflow == true)
      {
          alert("Please Fix Overflow")
          exit(0);
          }
  
  //Function FindOverflowText Start
  function FindOverflowText() {
      myPages = myDoc.pages;
      for (i = myPages.length - 1; i >= 0; i--) {
          objTextFrames = myPages[i].textFrames;
          for (j = objTextFrames.length - 1; j >= 0; j--) {
              objTextFrame = objTextFrames[j];
              if (objTextFrame.overflows == true) {
                  objTextFrame.select();
                  return true;
              }
          }
      }
      return false;
  }
  

  If my coding help, then please click on the correct answers.

  Thank you

  Siraj

• How to create the alert message

  Apex 4.2.5

  create a form on a table

  After entering the fields, the user clicks create the button Save.

  But I want a dialog box saying "would save you the folder you entered? Yes or no"

  There will be 2 buttons Yes or no or cancel

  How this is done?

  second question:

  Typically, after creating a new record, the form is reset or clear. What happens if I want to keep the values, I entered after registration? in other words, the shape

  is NOT cleared.

  How this is done?

  Thank you all.

  > > wozi

  Hi Wozi

  Answer 1) Try use this plugin

  -Action Dynamics Plugin - Alertify

  Answer 2) change the elements of the branch of the page to save the States or the values on the page you need

  Concerning

  Mahmoud

• Where the das value the FQDN in OME Alert Message comes from

  If I place an alert Action to OME, OME provids the details of the alert Message to the script that I defined. In the alert Message, there are several types of information, such as Service number, alert and FULL domain name.

  Now, at one customer site OME reports for appliance name and domain FULL of different values. I was wondering where the FQDN value is taken. It is something of DNS or has he just iDRAC? If it comes to the iDRAC, I can configure it? Is this something I can configue on OME or iDRAC?

  OME performs a reverse DNS lookup.

  This is a list of name resolution that OME crosses top down

  1. If the inventoried by OMSA server then the FQDN DNS name servers
  2. iDRAC name DNS (Reverse DNS lookup)
  3. iDRAC (iDRAC host name parameter) host name
  4. IP address

  If you let the iDRAC registers in the system DNS enable this check mark.

  

• iCal open the alert file does not

  I have installed 10.11.3. iCal Prefs are set correctly according to the suggestions of Apple.

  However, if I set an alert to open the file in the section 'Custiom', the alert does not open the file or reacts in any way in time. What's most frustrating is when I open the same file again to check if I did something wrong, the field 'alert' is 'None' showing!

  What I want to buy Fantastical2 app (tested, it turns very well), although iCal played perfectly for years on different platforms of OS X, I used?

  Hello there, Bob.

  It seems that you encounter no success with the calendar to inform you with alerts personalized on your MacBook Pro. One thing to try is to test the behavior in a new user. This testing process is described in the following Knowledge Base article:

  How to test a question in another account on your Mac.

  Before you try a different user account

  If you see unexpected behavior on your Mac to first try the following steps:

  Try to search the base knowledge of Apple for the specific symptom or an alert message you see. There could be more simple measures that you can take to solve the problem.

  Try to boot your Mac in Mode safe. Restart your computer. Hold the SHIFT key when you hear the startup sound. Release the SHIFT key when you see the Apple logo appears. Your Mac starts up in Safe Mode. Safe mode performs a check of your startup disk directory and removes data from the cache. Once your finished Mac commissioning, restart the Mac normally (without hold the SHIFT key) and see if the problem is resolved.

  Make sure your software is up-to-date. The question that you see can be addressed by installing the available updates.

  Check to see where the problem occurs. If a problem arises until you see your desktop, it is less likely that it is related to a setting or a user account. If a problem occurs with a Web site, see if the pages of other websites correctly first load. There could be a problem with the site and not your Mac.

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  If there are documents from your user account that you want to test with original, place a copy of these items in the shared folder in the users folder. Press the Option key while dragging a file in this folder to create a copy.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Try the same steps that caused the unexpected behavior to appear. For example, if you are unable to print, try printing from this user account. If you were unable to connect to the Internet, try to navigate on a website of this user account.

  If you use specific test settings depends on (for example using a specific e-mail account or an account iCloud) implemented the same test user account. For email and other parameters, you can use the Internet accounts pane in system preferences to set up these types of accounts. If your home folder files are necessary for tests, copy them into the shared folder in the users folder (/ Users/Shared). After you connect as a user test, copy these items to the same location in the test user home folder to test with.

  If a problem occurs in account only one user

  Is using the same steps in a user account test does not cause the same unexpected behavior, most likely you don't need to reinstall applications or OS X.

  • If a problem occurs only in a single application, check the documentation or Web site for instructions on troubleshooting specific preferences or the definition of the application files.
  • If you need help with a problem or a specific alert message, search the Apple support Web site for the text of the alert message you see.

  If a problem occurs in more than one user account

  If the same unexpected behavior occurs in more than one user account on your Mac, try checking for software or hardware problems.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• addition of my application in alert Messages / other

  Hello

  How can I add my request in the alert messages.

  Where can I choose a ringtone or tones for blackberry devices

  Thank you

  You can use the notification API to integrate your application into the app profile.

  This means that the user can configure alerts for your application in the native
  app profile in the section 'other '.

  the demo app of notification in your folder of eclipse samples shows how to do this. You can also see the developer on this subject guide

• Alert message

  Hello!

  How to display the alert message?

  When I use Dialog.alert in my application class, the program crash.

  Thank you.

  use:

  Public Shared Sub errorDialog (final String message)
  {
  UiApplication.getUiApplication () .invokeLater (new Runnable()
  {
  public void run()
  {
  Dialog.Alert (message);
  }
  });
  }

  myScreen.errorDialog ("TEST");

• Alert Message of blackBerry Smartphones won't go away!

  I have the Curve 8330 from Verizon, and I can't get the alert message unopened to disappear from the Welcome screen.  I have no no open message and the flashing LED is not, but the yellow envelope unopened with the number '1' will be not clear.  If anyone can offer advice, I would be happy!

  Remove your battery and so you and your phone will restart.  That should clear the alert message.

  Mimi

  ljs129 wrote:
  I have the Curve 8330 from Verizon, and I can't get the alert message unopened to disappear from the Welcome screen.  I have no no open message and the flashing LED is not, but the yellow envelope unopened with the number '1' will be not clear.  If anyone can offer advice, I would be happy!

• Greetings, Im getting an urgent message when I try to open my safari browser. He said a number listed in the contact message. Is it a real Apple alert or a scam?

  Hello, I get an urgent message to communicate a number of phone about my safari browser. Is it a scam? What is the official support of Safari Apple #? Thanks for your help?

  It's a scam.

  Force Quit Safari using the command + Option + ESC shortcut keyboard, then restart Safari while hiding the SHIFT key .

  Then, to your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data of the website can leave then restart Safari.

  That should eliminate the alert/scam.

  message edited by;  CS

• Change the default alert of the calendar 'Message with sound '.

  With the help of Yosemite and schedule 8, all my alerts, I set always with a sound. In OS X past systems, I could set the application to that default, but not in Yosemite.

  Is there a trick to change this default to have the alert go with a sound, instead of the repeated need to go into "Customize...". ">"message with sound?

  -Thanks!

   > System Preferences > Notifications > calendar > Sound