Microsoft monitors all PC?

Similar Questions

• Once we are on Microsoft 10 all our documents, saved emails, etc. will be at our disposal?

  * O.T. > Windows 10

  Once we are on Microsoft 10 all our documents, saved emails, etc. will be at our disposal?

  They must be and have been for the most part. That said, some have lost personal data. I strongly suggest that you not only back up everything first, but always backup. Many things can cause loss of data such as a hard disk failure. Do not drive a car with no spare tire.

• Microsoft have all Windows 7 OEM ISO downloads and buy an a microsoft certified provider ok OEM key?

  Microsoft have all Windows 7 OEM ISO downloads and buy an OEM key provider Microsoft Certified OK?

  What I hear for question 1 is it a new Digital River (Microsoft ISO download service) since you can now no longer download the Iso of Windows 7 from Microsoft unless you have a retail key.  Question 2 is explicit thanks.

  No, there is no key only option sanctioned by Microsoft, so be prepared to find the rejected key if you try to download the ISO. The PID is actually built into the authorization key, all other sent by e-mail is meaningless

  Microsoft are selling more than Windows 7, all real dealers withdrew the product.

• Microsoft Media all-in-One keyboard functionality issues

  * Original title: all-in-one Microsoft Media keyboard problems with Windows 7

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB Ram with Windows 7 Ultimate edition. I use the PC as my entertainment system, so I'm under a dual tuner HD (black gold) and a distance from the media library. The system is contained mainly used for the center of the media, but also streaming from Netflix etc.

  I recently bought a multimedia all-in-one of Microsoft keyboard (previously I had been using a keyboard and wireless Microsoft mouse), installed the drivers successfully. However, the keyboard does not work properly. The problem manifests itself in many ways, in media library, I can't select (i.e. the click doesn't sem to function either by using the left click button or clicking with the trackpad) and the window controls appear not (close/minimize/MediaCentre button) when I move the mouse pointer. When I do not press, the keyboard seems to be more reliable when used all first, but then after a few minutes, it no longer responds to click on requests then I need to remove the computer USB dongle and re - insert to get the keyboard to start to answer again.

  I have all the latest drivers, and the system is constantly being updated.

  Any ideas?

  R

  Hi Richard,

   
  Thanks for the reply with the details of the question. Sorry for the late reply.
   
  Based on your response, I understand now that the lies of problems when you use the media center remote control and keyboard from Microsoft together all-in-one media.
   
  I suggest you run the hardware troubleshooter to check if it detects a problem with the hardware.
   
  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It verifies the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly
   
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  If you still have questions, please refer to the article below and check that helps.
   
  Understanding of mouse, keyboard, remote control and touch input
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa468225.aspx
   
  Please reply with the results for assistance, we will be happy to help you.

• I have only a single ID and would like to know if its possible to monitor all the VLANS.

  With only one ID I I want to know if it is possible to monitor all my VLAN in the network. I use version 4 ID and VMS MC 1.1.

  If I have to set my internal addresses and those which I define as internal are considered as approved, in the case that I have configure a port in my central switch to monitor all the VLANS in my network and connect the ID to the destination monitor port to sniff all the VLAN, VLAN which I consider as an intern?

  Also, I have switches catalyst 6006 and 6509 with version 5.1 (3) and 12.1 in each case, can I apply for fleeing to take acctions when an attack is detected?

  Is it possible this configuration?

  Thanks for any help-

  I don't know if the ID is used to detect the specific activity you mentioned. You would need to go through our list of signatures to see if it's possible. You can even submit a new assignment and ask this question again.

  As for the actions.

  Cat OS 5.3 should allow you to be able to inject a TCP Reset packets through a span port (requires the parameter enable inpackets).

  In regards to the blocking with Cat OS 5.3, I don't think that this version supports the VACL. You may need to upgrade the version of the OS to chat if you want to block with VACL, and you also need a PFC and an MSFC on the supervisor.

  NOTE: If you have an MSFC making routing you may also block with the traditional router ACL on the MSFC.

  On the IOS running native 6509 (where IOS instead of the traditional CatOS runs on the prime contractor), there may be a problem with TCP resets. I don't know if the port of the monitor (equivalent IOS native span port) will allow the incoming TCP resets. You need to browse the documentation.

  Some versions of native IOS (I think that what you have newer versions) will also allow you to monitor through the capture of Vlan ACLS feature. If the sensor is followed by a VACL Capture port instead of a port monitor then I think that the TCP reset works OK, but I have not tested.

  With native IOS the sensor supports router blocking with the traditional ACL, it does not support blocking with Vlan ACL in native IOS.

  NOTE: The difference between router ACL and Vlan ACL is the Vlan ACL is applied to the vlan and applies to all packages comining and at the exit of the Vlan. While the router ACL is actually applied to the INTERFACE of the Vlan where an IP address has been assigned and only applies to packets routed in or off the Vlan.

  NOTE: Native IOS requires that the master has an MSFC even load the image.

• Asked to "monitor all network traffic" Fusion 7.1-8.1 Windows plain vanilla VM - I didn't ask for it, how to disable it?

  Hi all

  I created a computer virtual Windows 8.1 on October 1, 2013 with the current, at that time version of VMWare Fusion (not Pro, who has the tab network preferences and the check box associated to whether to display it's fast) on my Mac.

  Since then, I upgraded the version of OS X to Yosemite and the version of VMWare Fusion to 7.1.1.

  At one time, months or years, I started having the prompt below:

  

  A virtual machine tries to monitor all network traffic, which requires administrator access. Type your password for this purpose.

  I don't want to allow this, I never asked for this virtual machine to use the "Promiscuous" mode, I don't want to do, and I can't find anyway to turn this off!

  I always leave the command prompt and everything works fine.  Discussions only I can find this in the forums are all related to people using ESX to vSphere, neither of which I have no knowledge where all used.

  I had an another VM Windows 8.1 on another Mac during the same time, which has crossed all the same updates, and it never shows this prompt.

  Please help make this stupid, quickly go and stop this virtual machine to try to use the "Promiscuous" mode!

  Thank you - Harold

  You have the Hyper-V role installed in the virtual machine?

• How to monitor all RMAN operations using single script in the recovery catalog?

  I use the rman recovery catalog, all databases are stored on the catalog database, is there any script to monitor all the databases that are registered in the recovery catalog.
  
  I have the script that displays only the last time success of the work of recovery catalog
  
  SELECT name, Inc., Journal, ctl
  Of
  RMAN.rc_database d,
  (select db_id, to_char (max (START_TIME),' MM/DD / YYYY:HH24:MI:SS') full)
  of s rman.rc_backup_set
  where s.backup_type in (')
  and controlfile_included = 'NONE '.
  Db_id group) f.
  (select db_id, to_char (max (START_TIME),' MM/DD / YYYY:HH24:MI:SS') Inc.)
  of s rman.rc_backup_set
  where s.backup_type ('i')
  Db_id group) i.
  (select db_id, Journal of to_char (max (START_TIME),' MM/DD / YYYY:HH24:MI:SS'))
  of s rman.rc_backup_set
  where s.backup_type ('l')
  l band db_id),
  (select db_key, ctl to_char (max (completion_TIME),' MM/DD / YYYY:HH24:MI:SS'))
  of s rman.rc_backup_controlfile
  Db_key group) c
  where f.db_id (+) = d.dbid
  and i.db_id (+) = d.dbid
  and l.db_id (+) = d.dbid
  and c.db_key (+) = d.db_key
  order by 1;
  
  Published by: 987633 on February 12, 2013 09:03

  Real!

  Difficult to shoot everything I want in a single query.

  select
          db_name,
          start_time,
          end_time,
          status,
          time_taken_display,
          output_bytes_display,
          output_device_type,
          session_key,
          session_recid,
          session_stamp
  from rc_rman_backup_job_details where end_time > sysdate -1
  

  Best regards

  mseberg

• "Windows XP, Microsoft Monitor Out, Version 5.1 (C) 2007 (build 2600.xpsp_sp3 - gdr.120821 - 1629: Service Pack 3).

  Whenever I use playback on my computer, it will play and then suddenly cut. If I raise "Monitor Out" and just slightly touch the fader of wave slide, it immediately to life and continues for a few seconds more and again, when I "first" put the plate which displays these cursors of fader on the monitor screen, who says "monitor, vague, Swsynth and CDplayer, the wave is always to the off position. until you drag the vague fader button upward. He always falls on the position until I'm playing another song, and does it again! It's really aggravating, Help!

  Ron

  Hi Ronnie Bishop,

  Welcome to the Microsoft community.

  Do you receive an additional error message/code?

  Did you of recent changes to the computer before the show?

  How long takes this issue into the computer?

  We will check if there is an error with the device in Device Manager:

  a. on the desktop right-click on my computer and click Properties or open Control Panel and double-click the system icon.

  b. in the System Properties window, click the Hardware tab.

  c. in the hardware tab, click Device Manager .

  d. check if there is no yellow exclamation that the device does not work.

  Post back with the result.

  Post back with the result.

• Microsoft Media all-in-One keyboard, reprogramming of the 'home' button does not (wireless keyboard)

  The tone is re-programmable, using Microsoft Mouse and keyboard Center. (His new purchase, so I'm a little disappointed).

  So, I changed the default value of "Open Internet Explorer", the so-called "Instant Viewer".

  It only works intermittently.  Sometimes this, each of the following.  Unfortunately quite randomly.  All results are frequent, not just a 'occasionally' that kind of thing.

  • Open the Instant Viewer
  • Opens Internet Explorer only
  • At the moment flash Viewer, but he goes and opens Internet Explorer.

  Sometimes it is literally alternates between them a press after another, sometimes he's alone for many presses in a row.

  Of course, I went back in the center of the keyboard and mouse to check that "Instant Viewer" is still selected, and it is.

  Also the same thing happens if I choose "Flip" for that key, it works randomly, as shown above.

  Is this simply a behavior "pure bug?  It "does not work as stated? Or y at - it another way I can get a consistent operation of this key?

  Thank you

  Hello Tom,

  Please provide a detailed description of the issue.

  I certainly understand the inconvenience caused to you.

  I appreciate all your efforts towards the resolution of the problem.

  There could be a possibility that this issue would have occurred due to corrupted in the system keyboard drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Please refer to the procedure described in the article below and check if it helps.

  Fix shortcuts or Volume control keys not working not not on Microsoft Keyboards

  http://support.Microsoft.com/en-us/KB/932875

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  If the problem persists, follow method 2

  Method 2:

  I suggest you to uninstall and reinstall the software all-in-one Microsoft Media keyboard driver and check if it helps.

  To do this, please refer to the steps below and check if that helps.

  1. Type devmgmt.msc in the search box start and press ENTER.

  2. In Device Manager, expand the mouse & keyboard listed in the list of devices.

  3. Right click on the driver.

  4. Click on uninstall.

  5. Restart the computer. The drivers will install automatically.

  To download the driver

  http://www.Microsoft.com/hardware/en-us/d/all-in-one-media-keyboard

  For reference:

  Please refer to the article below and check if it helps.

  Assign the macro or function to your keyboard

  http://support.Microsoft.com/en-us/KB/237179

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Monitor all-in-one Epson Stylus CX3900 printer ink does not work with win 7

  Ink monitor does not work with win 7. It is connected to a pc win 7 and the ink monitor does not work on the two win xp computers on the same network.

  There are Windows 7 drivers here...

  http://tech.Epson.com.au/downloads/category.asp?sCategory=Multi_Functional&ID=styluscx3900&SelOS=Y

  Have you tried?

  Generally, functions such as ink levels work only on the host with the full support of the package installed and is not available for all computers that are connected to the host of the printer.

• Control within the first screen takes the whole monitor all the time

  At first it happened from time to time and now it happens all the time.

  I have two monitors and when I'm not working in first Pro CC image what ever is on screen in the PP I'm working currently on will take succession the entire screen 1... Monitor 2 is fine and is never the image.

  This happens only when I'm not working directly. So if I switch screens or just take a few minutes break from PP I will come back and the entire screen will be the last image I had on the monitor in PP I was working on. Never another image.

  When I click a few times on both monitor and / or come and go with my mouse between the two monitors and click on it will return to the screen of PP work and I can then work for a bit.

  I noticed it doing when auto save a few times, but that might just be a coincidence.

  This happens only on PP and no other program CC or any other software I've ever used besides... Premiere Pro only

  And he would do with Premiere Pro 5 as well until I'm Cloud

  Ideas?

  Thank you!

  Uncheck the monitor 1

  Check the screen 2.

• Is it possible to use the wizard to analysis of Microsoft with all-in-one HP Officejet 7410?

  I have a HP Officejet 7410 connected to my system and it works well had to analyze the documents, that I prefer software that comes in the accessories of Windows XP. Naturally, the HP software overrides this facility and the scanner is not seen. Is it possible to make visible in the Microsoft program?

  Thanks for your suggestions.

  If the printer is connected by USB cable, you should find the scanner icon in the control panel > Scanners and cameras. If you double-click on the icon of the scanner, it should start the wizard for scanning.

• Dual monitor - all HP - do not find the second monitor.

  I have a hp computer with integrated graphics - intel G45/G43 Express Chipset - output vga and dvi - latest drivers.

  I have two monitors - hp le2201w and hp vs17e. Both monitors have the latest driver updates. The two monitors are have only a vga input.

  I bought a DVI converter to avg and have hung up two monitors to the computer. If AVG from computer to a monitor AVG in. Then DVI converter AVG computer to another monitor. (I tried to change the monitors).

  No matter what I do, the dvi out is not found. I even tried DVI only to a monitor and it does not work.

  Any suggestions?

  What PC do you have?

  Sometimes, when there is sometimes integrated VGA and DVI on the motherboard, the DVI is DVI - D, which would mean that you can not use an adapter as there is no analogue. This document gives more details, http://support.hp.com/us-en/document/c00377019

  See you soon,.

• where can buy product key for windows 7 on microsoft website - all links lead to win 8

  have another computer with win7 and want to upgrade another vista to win7 - software of the camera does not work on win8

  Can't find a page on the microsoft Web site to buy win7

  THX, pat

  You are welcome

  J W Stuart: http://www.pagestart.com

• How to monitor all the parameters of MySQL with hyperic

  I'm using hyperic open source edition. I installed AC-server on the same machine and AC-agent on a more machine which has MySQL 5.1 installed, I get only the
  Metric of "availability".
  In the configuration of the MySQL server, I added the mysql username as root and the password for the user root.
  How can I activate all the metrics of tomcat apache for collection?

  Hello

  are you sure you are using the right username and password?
  Have you tried to connect from the command line, for example, mysql-h localhost-u root Pei
  Based on your other display, I assume you are using the wrong credentials.

  Mirko