Addition of the 1394 front connector

Similar Questions

• HP 810-150se: VENT at the bottom front of 810-150se?

  Reassemble the system after adding the new power supply.   I noticed a plug in front of case which leads to the small LED on the lower front of the system.  Where this sheet belongs?

  Nothing essential but has my curiosity as to what it is and what it connects to.

  TIA...

  It plugs into a power connector sata, like those connected to hard drives.

  There is a connector on your old diet just for that, you should have a few additional ones on your new power supply.

• I can't burn a label on the side front of the CD

  We were told that our computer was "light scribe" (or something like that), so we can burn a label on the side front of the CD.  I can't find this option anywhere when I burn.

  We were told that our computer was "light scribe" (or something like that), so we can burn a label on the side front of the CD.  I can't find this option anywhere when I burn.

  =============================================
  In addition to the LightScribe drive, you also need LightScribe
  CD/DVD and a special software that may have been before
  installed on your system...

  See the following article for more information.

   
  Burn a label - LightScribe start-up
  http://www.LightScribe.com/gettingstarted/index.aspx?ID=276

• the new firefox open my home page in addition to the start page of firefox, everytime I open firefox. How can I stop this and make sure ONLY my home page shows?

  the new firefox open my home page in addition to the start page of firefox, everytime I open firefox. How can I stop this and make sure ONLY my home page shows?

  Delete the USER. JS file if there is (some plug-ins create in addition to prefs.js).

• Satellite U400-22Z - random character of space in addition to the letters types

  Hello!

  On a whole new Satellite U400-22Z by pressing the letters on the keyboard sometimes it types a space character in addition to the letter pressed after the letter. for example, by typing the word "test" it may look like in "you st" or "t" or your "t" (although if the problem appears, it allways inserts space at the same location in a word give, then it would always be "t's" If that Word is typed several times). the problem occurs randomly, sometimes, that the problem does not appear for an entire session or day, sometimes several times after another. the probleam appears in several programs (IE, explorer, firefox, Word, even to the connection of the user to the start!)

  I tried (after talking with toshiba support) and an update - chip and bios does not work remove the problem. even after a complete roll-back to the original state of pre-instaled/factory using the disk HARD recovery has failed. It is very difficult to locate/pinpoint the problem to some show because the problem might appear only a few days and then "strike" again...
  I am running vista home 32 on the laptop, and given that the bug appears when using only the installed software origin I dosent seem to be caused by something other than the original software...

  Any help would be greatly apreciated!
  Tankxs everyone!
  Greetz, cybersurfer

  Hello

  You must update the BIOS mate.
  I am owner of U400 and I did update the BIOS as well.
  He solved some annoying problems.

  PS: Disable Touchpad while typing I still accidentally hit and so my Messenger jumped to another line

• Qosmio G30: I am looking for an atenna with the appropriate male connector

  My G30 came with an analog TV tuner antenna adapter. The adapter is female. IM hardly an atenna with the appropriate male connector to connect this adapter. I tried one type of coaxial cable but failed.

  In this case, what is the type of connector should I look for?

  Thank you.

  Hello

  Hmmm, a long time ago, I used a G20 and I think the G30 is using the same antenna adapter.
  I simply connected the antenna to the coaxial antenna cable adapter.

  These coaxial cables use male and female connectors.
  There are also adapters with 2 x female or 2 male connectors.

  I think that you should just ask the computer, TV/video shop for a compatible cable/adapter!

• Satellite M100 - can not repair the 1394 connection & Wlan driver needed

  I installed XP Pro on my Satellite M100, due to being Home Basic, vista terrible.
  I installed all the drivers listed on the site of toshiba for the XP system.

  When I try to repair the 1394 connection I get message saying to error failed to query TCP/IP.

  Can someone help me with this problem?

  Also the wireless for this system driver does not appear to be installed.

  Does anyone know where I could get it from?

  Thank you.

  Hello

  May I ask if you have installed the LAN driver?
  And if you have installed the network driver; have you tried to update the driver LAN?

  To be honest, I do not know why this error, but I wonder why repair you the 1394 connection.

  However, in my opinion the LAN driver should be updated and you should also check if the TCP/IP protocol is set to automatic.

  You can google a little how to change TCP/IP settings.

  By the way; The WLAN driver can be downloaded from the Toshiba driver page!

• Reference to the control on the main façade fails the Subvi front is closed?

  Hi all

  I meet a strange bug. In my code, I use a Subvi to control a piece of hardware. The Subvi has commands for all functions of my hardware.

  I changes the value of one of these controls in my main façade by running a reference to a button on my main façade in the Subvi, grabbing the value of the button with a property node, then update the value of the Subvi control using a node property signage.

  This works very well when my Subvi front is open, but does not work the Subvi front closing.

  I am new to labview, so any help is appreciated.

  Thank you

  Rachid

  This event triggers a series of writing for the real hardware. The material is sent only a command when something changes.

  My code is made up of handlers inside functional global variables. In this way, I can send different parts of code of different orders (example: reset and reset) with the events generated by programming.

  The value of the wheel of the page main itself, according to my probes, getting through. It's the Subvi button that is having a problem.

  I work under a certain pressure of time pretty important, so I managed to convince the boss that the front panel of the Subvi open does not violate the requirements of the application. I guess this has solved my isse.

• Open the Panel front of the Subvi, which is called by reference in the EXE

  I want to open the façade of a Subvi when it is called. This sub - VI will open the façade of a Subvi third level. So, I want to go back to the main.vi the output of the subVIs.
  I can do successfully in the development environment.
  I call on the reference asynchornously screws. If the screw load when they are called and the calling VI awaits the release of the subvi.

  I am attaching the screenshot of the window subVIs properties customize.

  When I build the application, the executable file could not be opened the Subvi front panel, even if the paths of the subVIs are related.

  I also put the subVIs in the field "Always included" the build properties and the box "Remove front panel" is not selected.

  I join the project and screenshots of the parameters.

  If you had used the dialogues of error, you would have seen the paths of access to the VIs you build are not valid.  The screws are always included in the EXE file, so you don't have to do any special stripping of the VI EXE path.  A fake wire to your case structure determine the path, and it works perfectly.

  Just dual-band is the path if you try to get the EXE directory.

• "The HP LaserJet 1020 has the open front door or the toner cartridge is missing." Not true

  I'm going to print something and the troublescreen said: The HP LaserJet 1020 has the open front door or the toner cartridge is missing. But the door is closed and the cartridge is fine. I put a new in after the message started appearing thinking that the low level of ink was casusing the change. I suspect a mechanical switch is kaput, but do not want to enter the machine. All the switches look and feel like they are working normally.

  This little machine of love, it's a real workhorse, simple and effective.  I use a laptop Samsung with Windows 7 and my actions joint the printer using a Toshiba PC. We both get the same response from our little hp... todius

  I will now let you know that we have done to resolve this.  My wife has stuck a pencil in the slot of reception for the closed cover pin located on the corner left front of the top cover. She shook it until she was able to close the lid and printing. He now works as it always has.

  Babe thank you... todius

• How can I reset Windows Media Player to use songs on my external backup drive instead or in addition to the songs on my desktop with Windows Vista Edition basic hard drive family?

  How can I reset the Player Windows Media in Windows Vista Home Basic to use the songs on my external backup drive instead of (or in addition to) the songs on my desktop hard drive?  Currently, the Media Player library indicates that the hard drive (C:\) is my only option of disks to use for sources of songs.

  Basically, I want to have Media Player external drive for all the songs from research and build his library on this disc instead of on the C:\ drive.
  My problem is that the songs are hogging too much space on my hard drive, so I want to move to my external drive to backup instead, but Media Player will not access it.  I saw an option in Media Player to add a song to a different drive to the library whenever I play a song of this player, but that would require me to play all the songs moved one at a time, which is not practical, and which would not solve my problem because Media Player could still be maintaining the library on my HDD to say.
  Any ideas?
  Thank you.

  Hello

  See the steps in the following article on how to manage the music library.

  Add items to the Windows Media Player library.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

• move pictures from a memory stick in a different place, and release in addition to the memory stick. I find that the pictures (copies) are always on the memory stick

  I don't want to make copies, which I already have, I want to get out in addition to the memory stick of mnving content in a portable hard drive permanently. My photos are totally assembled in 3 different places in my windows computer (not my fault) Photo Gallery, I don't want the images there are... My collection is private.  Picasa collects all the photos again. I want the originals stored for future use in a hard drive laptop or on disks.

  I do not use the photo gallery, you just need a viewer to open the pix.

  Also, I don't know why you get 4 copies. Some libraries can be deleted if you do not use. I don't remember those that can be deleted, so you'll just to test.

  If I understand correctly: create a folder for the original user and another for the edited pix. After you have moved the pix on the flash drive, you can delete the content of this file and it is there and empty for the next round of pix.

• IOM to the web service connector

  I need info on the IOM for the web services connector. Here is the guide of https://docs.oracle.com/cd/E22999_01/doc.111/e38352/toc.htm Web services connector

  All those put in place this connector with a webservice? What is the required coding effort?

  I do not know this connector IOM works very well with AD, etc. of the OID and have used it with great success. But never used the connector with the webservices. Please, share your experiences and let me know any extra info.

  Take a look at the labs to find answer to your question:

  Extending Web service connector

  This asset introduced two labs that explain how you can use the Webservice service connector to build integration with an example of target application.

  http://www.Oracle.com/technetwork/middleware/ID-Mgmt/Overview/extending-WebService-connector-1936919.zip

• ADF: addition of the JSF error message: another user has modified the line containing oracle.jbo.Key [185 primary key].

  When you call the function DB. The function performs its operation, but shows an exception. In JDev 11.1.2.3

  And there is not another user. I'm testing alone.

  ADF: addition of the JSF error message: another user has modified the line containing oracle.jbo.Key [185 primary key].

  oracle.jbo.RowInconsistentException: Houston-25014: another user has modified the line containing oracle.jbo.Key [185 primary key].

  The problem is that the function db has a commit and my code also. However the db function called once in a case.

  Thanks a lot for your help.

• Questions of the ON24 cloud connector

  You have some questions, little that can actually be applicable and able to answer by people using connectors of cloud by other Webinar providers too...

  (1) by using the register cloud connector, I notice more often, he can send that ON24 data once a day. Anyone know what time of the day it does this?

  (2) associated with #1, what happens to people who register at the last minute? They are not if is going to be in the system at the time where the stats Webinar, won't be able to connect.  I remember when I saw a demo of ReadyTalk cloud connectors, they talked about this question and said they send a different email to these people, with a direct link to the webinar, without having them to connect.  Other people do it too, or is it better to maually run the connector cloud just before the start of the event, to push these people of last minute?

  (3) I'm not the admin of On24, so this question may be basic and I hope easy to answer - the landing page on On24 standard where the connection of people and you register has the form of ON24. Obviously, I don't want to replace this form with form Eloqua? Or so people otherways to go about this?

  Thank you

  Eytan

  Cloudfeeder really does not fit in your use case. It is used when someone wants to transfer those who are not registered channel Eloqua in the system.

  It seems that On24 CloudConnector registry has a single drop further down to the amount of time that should not be in step. We feel that deleted. For now, just leave it at once a day. He will speak in the regular time.