Additional CPU added to SLES 10 VM not detected by core
We have just added a 2nd vCPU to two of our guests SLES 10 SP2, and even if the CPU is also present in VC and in graphics performance, the core is not seeing her and always reports as a single CPU.
Any thoughts?
Thank you
Jon
SMP kernel?
Marcelo Soares
VMWare Certified Professional 310/410
Technical Support Engineer
Chief Executive Officer of the Linux server
Tags: VMware
Similar Questions
-
Headphones not detected in Inspiron 3521
Helmets of all brands are not detected after being connected. Sound can be heard through the speakers of the helmets... but the device isn't in the list. In addition... the headset microphone is not detected. So m forced to use the microphone integrated in... for which I loudly and strong to make my voice heard. I HAV set mic and volume boost to maximum already.
M tired of trying all the tricks and stuff like that to solve the problem.
Checked audio and recording setings to devices in the control panel... tried to reinstal Realtek audio driver... somwhere in your forum a previous version of the driver has been notified to b instaled as he didn't hav dat somebug current version has linked to my prblm.
But all in vain.
Basic necessity is to make Skype calls. Have checked the Skype settings also. Nothings dere too.
Please help me guys.
The only thing I can think to add to my previous comment is to try another microphone. Unfortunately, there is not a dedicated diagnostic tool that can distinguish between a material and a firmware problem, so all you can do is try everything remove options when you try to diagnose such problems.
-
Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.
Hello
· Is that what the problem is with a specific file extension?
· How long have you been faced with this problem?
· You did it last changes before the show?
Follow the steps below to solve the problem:
Method 1:
If you have problems of location of the files, folders, or other items on your computer, try using the search and indexing of troubleshooting to solve the problem. It ensures that the Windows Search service is running and checks if you have the correct permissions to search all the directories on your computer.
See the article below for additional information and steps.
Open the troubleshooter for search and indexing
http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter
Method 2:
Also I ask you to re - index files and then check. Follow the artticle below for the procedure.
Change advanced indexing options
http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options
See also:
Improve Windows searches using the index: frequently asked questions
Hope this information helps.
-
500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS
Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message. I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.
At startup, the cpu fan is not running, but after pressing F1. Please notify.
From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.
-
HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected
I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.
At the bottom of the screen, it says F1: Boot
Then he begins to run smoothly. It becomes annoying.
Examination of the aircraft, but when I find the two fans running?
What is the problem and what I take in repairs?
Hello
Use a can of compressed air to clean any dust from the fans in the PC. With the side panel, power on the PC and still observe the rotation speed of the fan. What do you see? slow, medium, or high speed?
Open the windows to RUN and enter: MSINFO32
What level of your PC BIOS runs?
Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic. Run a complete set.
-
I have office 2010 & have now lost the spell checker in Outlook Express I also use "Outlook" for additional e-mail address spelling corrector does not not only Outlook Express
When I up graded to Windows 7, my spellchecker didn't work anymore. Help, thank you, June
-
and need me addition inherited material steps, but it will not reinstall why it shows up.
Its a hidden device. According to Device Manager menu click on "see the hidden devices. It should show up under network adapters.
-
Original title: temporary profile
I was wondering if anyone can help... I have a compaq laptop, windows 8 and the last few times ive turned on n signed in its took much longer than usual and connect to a temporary profile where it seems that everything I had there before such as files and photos have already disappeared. But it then opens with a message saying something along the lines of. . "You have been logged on with a temporary profile, in this profile, you can access saved files and any new tjing created or added to this profile will not be saved" does anyone know how solve this...
Hi Lucie,.
Activation of the built-in Administrator account can help get the problem solved.
Perform the steps suggested by Pinaki displayed from the link below and see if it helps.
Answer please if you have any questions.
-
I recently bought 13 elements for Mac OS and can not download N - OS and can not download files NEF RAW taken on my Nikon d5500 has been added. The model is not among those supported by the elements, but the D5300 is, which is almost identical. Is there a quick fix?
What is N - OS?
For the problem of camera raw, every new device has its own raw format, and ACR must be updated to include the latter. Happened yet for the d5500 has been added, so you'll just have to use the Nikon software until Adobe gets the info and releases an updated version of ACR. It is not uncommon to be in your situation, if you buy a camera model that was only a month. You just wait a bit.
-
HP Solution Center does not detect that I've added a second printer
I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.
HP Solution Center recognizes my HP 2575 x, and everything works.
But now I have an extra F4280 HP I want to add in via the USB port on the computer.
First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.
Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.
Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.
I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.
How can I know the HP Solution Center to detect and add my new printer?
Thank you.
When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?
-
Pen tool sometimes does not detect path under cursor for adding a new point
Hi people...
I just create a path with the pen (arrow) tool, but I found when I select a path, select the pen tool and move the mouse on the path to add a point, but the pen tool does not detect the underlying path, and the cursor does not change the pointer with the sign «+» If I click, it will start a new path.
Curiously, in the same example, the tool pen tool changes to the anchor Point tool to remove if I hover over an anchor point on the same path I did not have the Add anchor point tool.
Even more strangely, if I draw an ellipse or draw a path with the pencil tool, select it, select the pen tool, I DO get the Add option anchor when mouseovering path.
Is this a known problem, or am I missing something?
See you soon!
Richard
If Snap to grid is turned on, turn it off.
JET
-
Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive
Hello
My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
I made a USB bootable with Win8 and starts very well.The problem is that it does not detect my SSD, so I can proceed with the installation.
SSD appears in BIOS but not in Windows Installer.
He said that there is a missing driver.I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.
I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...
What can I do?
Thanks for the help.
Best regards
Bruno MoreiraMore old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
As you say, the compatibility mode is not working too, so I think there is another problem.However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.
But I m wondering if you would be able to install this Win 8 on common SATA HDD.
Have you tried to format the SSD using a different computer, then install Win 8?
Give it a try. -
Qosmio G10-133 - battery not detected after upgrading to Windows 7
Hello, I hope someone can help my frustrations here.
In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.
The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.
I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.
In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.
If anyone has any ideas I would really appreciate it or all the links to the drivers etc.
If this is sorted my laptop should last for 5 years!
Thanks for reading this.
Dickie
Hello
First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!
To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.
If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought
By the way: some nice and interesting tips on battery:
http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm -
G50 - 70 - AMD VGA not detected
I buy lenovo g5070 cpu:i5 ram: 6 GB hdd:1 to vga: amd
I have install windows, but does not detect not not amd vga
also on win 7 does not detect nothttp://i58.tinypic.com/2vkeve9.jpg
Mod edit: System model added to the front of the subject line to improve visibility / clarity.
Hello!
his problem was hardware, I sent it to the warranty, they change the motherboard for me! -
My computer says webcam not detected
I have a HP computer and I when I try to use the downloaded client webcam with my computer, CyberlinkYouCam, he says that the webcam is not detected. I went into the Device Manager screen to find it under imaging devices, but there is nothing there. I scanned for a new hard drive, downloaded the new software YouCam, but I don't know what else to do. It does not anywhere what the pilot is supposed to be, but I guess it comes to YouCam. I read a lot of questions but nothing says what happens if you can't find what you did driver, or if it does not work. It's a built-in camera.
Hello
Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
1. What is the model of the CyberlinkYouCam number?
2. do you get an error message?When you install the Microsoft LifeCam software, and then you plug the LifeCam hardware, the LifeCam hardware is not detected. In addition, in Device Manager, the properties for the LifeCam entry display one of the following codes. I suggest you try the steps from the following links and see if that helps.
Troubleshoot failures to find the new LifeCam hardware
https://support.Microsoft.com/en-us/KB/929087Don't troubleshoot bad or no video or problems to start the LifeCam software
https://support.Microsoft.com/en-us/KB/933310Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/)
Post us the results after trying the steps above.
Maybe you are looking for
-
Hi, I use Iphone 5 s with version 9.3.2. From two days I can not use the rear camera showing an error like "iphone disabled flash 5s needs to cool down the 5s downflash disabled iphone needs to cool down" Please provide your solution on this.
-
I can't find any manual operation or details for Satellite L500/033
Help? Although my registration has been accepted by Toshiba (for the redemption of cash) I can't find any manual operation or details on the site Web of Toshiba. Can someone please help with instructionsCaz
-
Operate computer w Windows 7 for printing and scanning. Can get ony impression at work Windows 10 rounds. Ititially scanning worked, but it won't now. Someone knows how to get this working?
-
Logon Windows Live Family Safety - access denied - error Code 80070005
Hello I can't connect to Windows Live family safety. I had it installed previously and it worked but he kept asking to open a session. When I tried to connect, I get the error. I uninstalled it and re-installed, but still the same. After installation
-
Hi guys! I'm really confused... Help, please! We have developed applications for our customers. We tested with our BB8700 and it works fine. We used JDE4.2 for development... and we think that it will work on v4.2 based handsets. But our customers wr