500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

Similar Questions

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

  Hello

  My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

  I hope you can help.

  Thank you

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• C.P.U fan not detected at boot

  When I turn on my desktop, it says cpu fan not detected & the bottom 'F1 boot' button appears after pressing on which I can log on, I had windows xp on my computer.

  Please tell me how to fix this error...

  Hello.

  Open your computer case and check the fan I have well connected to the motherboard, and it is infact turns when you turn on the computer.

• fan not detected

  HP Z800 workstation

  Windows 7 Professional

  error 511 and before error 512 chassis and CPU fan not detected

  It is still in warranty?

  This error message is usually an indicator of a fan or vent. I recommend that you do not use the PC, unless you have checked that the fan is indeed running. If it runs and you still have this error message fan needs to be replaced with a new one.

  If you use your PC with a fan that is not operational, then the CPU will become non-operational for still some time.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• HP pavilion g6-1304sv: the Hp pavilion g6-1304sv CPU fan replacement.

  Hello I have a hp pavilion 1304sv g6 and I want to replace the cpu fan, please indicate in what spec I write to find one to buy or if you can show me a link to amazon or something. Thanks for your time.

  Here is the Service Manual:

  Manual

  page 24 it's your fan, since you have intel video dedicated and chipset hm65:

  For use in Intel HM65 discrete computer models 641141-001

  I couldn't find one for a reasonable price on amazon or ebay. I can find just the fan and you can reuse the heat sink, but which requires an Assembly and disassembly.

  http://www.eBay.com/ITM/new-for-HP-Pavilion-CPU-cooling-fan-643258-001-641141-001-643364-001-657942-001-/181415497977?hash=item2a3d34d0f9:g:6hAAAOxyBvZTQ

  You can also get just the radiator part:

  http://www.eBay.com/ITM/cooler-for-HP-G4-G6-G7-G4-1000-G6-1000-cooling-heatsink-643257-001-641141-001-/161911751836?hash=item25b2b1449c:g:H8wAAOSwBahVQZQ4

  It must be shipped quite a distance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Desktop Pavilion a 1110n: CPU is not supported

  PC can't run windows 10 because the CPU is not supported, and the PC doesn't have enough RAM (512 MB on PC), they have not said how much I need RAM.

  .. .thank you for your reply... what I mean, is that because my CPU is old I will not be able to update to 10 Wdos, I understand about the lack of RAM, but it seems that the only way I'll be able to upgrade to 10 Wdos must but a new computer, if this is the case someone please notify me that he don't no way than my current Desktop Pavilion a 1110n purchsed in 2005 does not accept windows 10 download free... Thanks in advance for your consideration and response...

• HP Pavilion dv6-3150us Entertainment Notebook not start after sitting on the side.

  Hello! I have a HP Pavilion dv6-3150us Entertainment Notebook that works under Windows 7. Last week, I traveled with him in Florida, and when I arrived and tried to turn on the laptop, it wouldn't start. The screen was white with thin lines going through it and the screen turned slowly black. I disassembled the computer and put it back together (which I have experience with, I installed a new fan at the beginning of last year) and he came in safe mode. This ihappened still once I put the laptop in my bag on back and then he pulled out a few minutes later (without even moving) and when I got home. I tested the hard drive and memory, and they both passed. Other that this question, the computer has worked fine. I need to get this problem solved, because I am a PhD student and travel frequently with your laptop. Could someone help me please? What causes this problem? Thank you.

  Hey irol72,

  Welcome to the Forums of HP Support! I understand that your HP Pavilion dv6-3150us is not initialize after being on his side, I understand your frustration and I would start you the black screen troubleshooting with no. Error Messages at startup or start-up.

  Thank you

• Satellite P750 - after update BIOS CPU fan runs faster

  Hi all

  On my Satellite P750 (PSAY3A - 02L 001)

  Since I've updated my BIOS to version 2.40, I noticed that the CPU fan runs much faster then normal.

  Even more, when I go in options inside BIOS configuration, saving it comes up with "an invalid entry.

  Has anyone experienced this problem? Know a way to solve this problem?

  In General, old BIOS is not available when one is offered on Toshiba new download page.
  If you have older version of BIOS try to contact the nearest Toshiba service provider and ask for help. They have access to the database of Toshiba and can get the ld for you version.

  By the way: have you tried to change the power settings for the cooling method and less upgraded?
  This should reduce the activity of fan cooling.

• Pavilion E016TX: Radeon HD 8670 not detected in Device Manager

  Hello

  I removed 10 Windows and installed Windows 7 on my laptop E016TX and after that the Device Manager does not detect the graphics card Radeon HD 8670.

  Can someone help me out here?

  Hi @RoneyJoy89,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the graphics driver does not appear in your device manager. You can download it from here and install it: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-14-e000-Notebook-PC-series/5355001/model/5389798

  Let me know if it works for you.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP Pavilion 17: Fax Modem internal not detected

  Spent too much time on this problem.  Win Fax & Scan does not detect the fax. Control Panel says Microsoft fax in the queue of root "works properly."  So changed original FXST30.dll, apparently to fix this 8.1 do not recognize the external modem. This does not solve the problem of detection. So the question is now: HP Pavilion 17 still has a built-in fax modem? And if so, why not Win Fax & scanning not detect.

  Any suggestion would be appreciated!

  Hello

  N ° normal laptops now have fax & modem. You can find fax & modem on machines older or on machines of the company. Moreover, what is your Pavilion 17? Please follow the instructions below to find the product/model of your machine:
  
    http://support.HP.com/us-en/document/c00033108
  
  Kind regards.

• Pavilion 15-p080ca hard drive not detected in Win8, 03F1 0021 03F0 Bios errors, impossible to recover

  Hello

  I bought a new laptop from Windows 8 15-p080ca tigerdirect.ca Pavilion and he received a couple of days.

  The computer restarts randomly when working on it, I remember reading an IO error message in a popup windows.

  Since then, he constantly reboot, tries to load windows, fails and restarts until the auto repair is involved.

  Journal of the system BIOS has to many warnings and error: 03F0, 03F1, 0021.  I had about 3 times a hard drive not found error on POST.

  I can't repair the installation either by partition recovery or recovery discs, I get "the disc is locked error" or "auto repair could not fix your pc.

  Also Manager of recovery can not find the recovery partition.

  On the command prompt diskpart list disk;  "There is no fixed disk to show.

  However, the live cd Ubuntu and xp Mini are able to see all the partitions, view files and read them, a quick HDtune read test indicates no disk error.

  The computer is able to read disk hard since I am able to get on the recovery and windows tries to load until I get "your pc ran into a problem that he couldn't handle and must be restarted.

  HP PC Hardware diagnostic SMART test, short DST returns warning.  Diagnostic test of smart HP returned message 'no hard drive installed' only once.

  Whatever it is that the base Windows 8, if the recovery disc, original media is not able to see the hard drive.

  I tried to boot the recovery disc, the recovery partition with each combination of Legacy support and secure start to recover partitions without success because the hard drive is not detected (from diskpart list disk command).  The recovery DVDs, I get an error 0xefffff08. I also tried to remove the thought of recovery partition that he might want to move things faster.

  Well, after many hours of research and testing, I think I tried everything I could do and would need support for additional testing or replacement of the defective material.

  Thank you very much in advance for your help,.

  Jonathan.

  Contacted HP Support, laptop, go to the repair center.  Probably the location of the hard drive to the motherboard as they said.

• Pavilion g6 - 1d18dx turns is not on after replacing screen

  Hi all

  I have a HP Pavilion 1d18dx g6, which lights up ANY after that I replaced the screen. The power lights do not light when I press the power button. When I plug in the AC adapter, the light near the orange plug is not even turn on. I also tried to plug in the AC adapter without the battery inside, but again - nothing.

  I replaced the screen because he had cracked after that I walked on it. Although the screen was broken, the computer itself has worked well. I continued to use it with an external display.  After what seemed to be a successful replacement, I pressed the power without answer button.

  My question is: I did something wrong during the replacement of the screen?  I need help to determine what went maybe wrong and what parts I should look / replace. HELP /.

  PLEASE AND THANK YOU

  Product number: B3P85UA #ABA

  Hi @brisl0 ,

  Thank you for visiting the Forums HP's Support and welcome. Thank you very much for the detailed information on the replacement screen. Here is a list for your page 72 of the manual. Page 70 has the power on that connector. That should be checked as well.

  I inspect the motherboard in order to have a crack or damage on it.

  I hope this helps.

  Thank you.